Italeri model kits
Military aircraft models 1:72 / 1:144
1:72 Sunderland Mk.III
510001352€49.99
Article number: 510001352 Product: 1/72 Sunderland Mk.III Model Dim.: 36,1 cm FULLY UPGRADE MOULDS -SUPER DECALS SHEET FOR 6 VERSIONS - COLOR INSTUCTIONS SHEET - CONTAINS PHOTO-ETCHED FRET The Short Sunderland was one of the most famous seaplanes of World War II. It’s came into service at the end of 1938 to equip the Royal Air Force squadrons of Coastal Command. The Sunderland Mark III, introduced on the end of 1941, turned out to be the definitive Sunderland variant, with a huge number of units built. The Mk. III can be considered one of the most effective and successful weapons to counter the German U-Boots threat during the Battle of Atlantic. The flying boat patrol bomber Sunderland Mk III has been decisively improved, compared to the previous versions, with a revised hull configuration and the adoption of new patrol and submarines search equipment. Even the offensive load, which could include bombs, mines and depth charges, has been increased .The reliable 1,065 Hp Bristol Pegasus radial engines guaranteed a top speed of 336 Km/h and a range, essential feature to perform successfully sea patrol and research duties, of 2,800 Km. Warning! Not suitable for children under 14 years.
Military aircraft models 1:72 / 1:144
1:72 Tornado GR. 1 RAG
510101384€18.99
Article number: 510101384 Product: 1:72 Tornado GR. 1 RAG Model Dim.: 23,2 cm Decals for 4 versions The multirole Tornado is a twin-engine combat aircraft with a variable-sweep wing. This kind of aircraft is the result of a joint development project carried out by British, German and Italian companies. Although during its lifetime it has been used for several purposes (ground attack, electronic combat/reconnaissance, interceptor), its main role has always been to perform low-altitude penetrating strike missions. Tornado can load and use a powerful and varied set of offensive weapons. The Tornado baptism of fire took place in 1991 during the Gulf War. The British Royal Air Force Tornado Gr. 1s, deployed on Bahrain and Saudi Arabia air bases, were crucial during "Operation Granby". Detailed Plastic Kit of model Tornado GR. 1 RAG in scale 1:72
Historical figures / battle sets
1:72 Union Cavalry 1863 The blue jackets
510006013€10.99
Article number: 510006013 Product: 1:72 Union Cavalry 1863 The blue jackets The battle of Appomattox Courthouse, during the American Civil War, was the final effort of General Robert E. Lee's Confederate army of North Virginia before his surrender to General Ulysses S. Grant, commander-in-chief of the Union army. General Sheridan's Union cavalry played a decisive role. The soldiers in this kit are represented with the typical cavalry short jacket without epaulettes, the Mc Clellan or chasseur hat, and the typical Sharps & Smith carbines. Contains: 15 riders 2 figures 2 horses
Historical figures / battle sets
1:72 Union Infantry (Amer. Civil War)
510006177€10.99
Article number: 510006177 Product: 1/72 Union Infantry (Amer. Civil War) THE BOX INCLUDES 50 FIGURES. The Union infantry has held, during the Civil War period, the weight of the most famous battles (Bull Run, Antietam, Gettysburg) suffering a very high number of losses. The uniform was characterized by the typical blue jacket. The officers often wore a tailor-made longer coat (redingote). Detailed Plastic Kit of model Union Infantry (Amer. Civil War) in scale 1:72
Historical figures / battle sets
1:72 Union Infantry and Zuaves
510006012€10.99
Article number: 510006012 Product: 1/72 Union Infantry and Zouaves The Union infantry has held, during the Civil War period, the weight of the most famous battles (Bull Run, Antietam, Gettysburg) suffering a very high number of losses. The uniform was characterized by the typical blue jacket. The officers often wore a tailor-made longer coat (redingote). Many infantry units adopted uniforms similar to those of the French Zouaves, who became famous during the campaigns in Crimea and Italy, with dark blue tunics decorated in red, white spats and the typical large red trousers. The uniform was completed with the red fez with tassel. Contents 50 figures.
Military aircraft models 1:72 / 1:48
1:72 US F-5A Freedom Fighter
510001441€22.99
Article number: 510001441 Product: 1:72 US F-5A Freedom Fighter During the 1950s, the American Aircraft Company Northrop began developmental work into a simple and "low cost" fighter that would meet the needs of several NATO member air forces. The F-5 met the precise specification, it being a light single-seat fighter, small in size but extremely maneuverable and effective. It was relatively simple and cheap to produce and was operationally efficient. The initial version produced by Northrop, designated F-5 A "Freedom Fighter", was fitted with two General Electric J85-GE-13 engines and could attain a maximum speed of 1,700 Km / h. Armed with two 20 mm. guns installed in the nose, the F-5 was a credible "multi-role" aircraft due to its weapons load capability, which could offer a wide range of offensive options for both air defense and ground attack missions. This multi-role aspect of the aircraft ensured its rapid take-up by many Air Forces. Detailed plastic kit in scale 1:72
Military model vehicles 1:72
1:72 US M3A1 Spähpanzer
510007063€13.49
Article number: 510007063 Product: 1:72 US M3A1 Spähpanzer The White Motor Company began its study and development of the M3 in 1938 to supply the United States Army with an armored reconnaissance vehicle. Equipped with a 6 cylinder 110 Hp Hercules JXD petrol fueled engine, it could reach a maximum speed of 81 Km/h. Equipped with four-wheel drive, it was used for patrol, reconnaissance and command post. The vehicle could carry up to 8 men and was armed with a 12.7 mm Browning M2 machine gun plus two more Browning 7.7 mm machine guns on the sides. It was first used in the Philippines campaign in 1941. Used in North Africa and in Sicily, it was replaced during the war, for advanced exploration tasks, by the more modern M8 Greyhound. Besides being used by the American Army, it was used as well by the Armed Forces of England, France and by some divisions of the Red Army who used it on the Eastern front to pull 76 mm ZIS-3 cannons.
Military aircraft models 1:72 / 1:144
1:72 US P-38J Lightning
510001446€28.99
Article number: 510001446 Product: 1:72 US P-38J Lightning Model Dim.: 16,0 cm SUPER DECALS SHEET FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET FIGURE NOT INCLUDED The Lockheed P-38 Lightning was certainly one of the foremost aircraft of WW2 in terms of aerodynamic structure and design. It was a revolutionary heavy fighter with a twin-boom fuselage where the two engines were installed. The pilot was accommodated in a leading-edge cockpit at the centre of the aircraft. The P-38 could reach a top speed of over 660 km/h thanks to its two 12 cylinders liquid cooled V-1710 Allison engines, each capable of 1,425hp. It was armed with four Browning 12.7 mm machine guns and one Hispano M2 cannon which ensured highly effective firepower. The P38 was not particularly manoeuvrable compared to other single-engine fighters of the period, but it was very robust and stable. Its huge versatility made it a key aircraft both on operations in the Pacific theatre and on escort missions for long-range bombers over Europe. The P-38 with its characteristic shape and its ‘fear effect’ was nicknamed ‘the fork-tailed devil’ by enemy pilots. Detailed plastic kit in scale 1:72
Military aircraft models 1:72 / 1:144
1:72 US P-51A Mustang
510001423€16.99
Article number: 510001423 Product: 1:72 US P-51A Mustang The North American P-51 Mustang is considered one of the most iconic aircraft in history, and widely credited as perhaps the best single-seat piston engine fighter of World War II. Among the earlier production versions, the P-51A was seeing action as early as 1942. Its new Allison V-1710 engine was very powerful and capable of attaining a maximum speed of 650 km / h. It was armed with four wing-fitted 12.7 mm Browning machine guns, which provided considerable firepower. The aircraft’s operational capabilities would be further enhanced by the fitting of two additional under-wing fuel tanks. It was deployed and designated in the U.S. Air Force and by the British Royal Air Force as the Mustang Mk.II. It achieved very early operational effectiveness in various roles, including air defence, bomber escort duties and tactical support missions. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35 Warning! Not suitable for children under 14 years.
Military aircraft models 1:72 / 1:144
1:72 V-22 OSPREY Tilt Rotor
510001463€29.99
Article number: 510001463 Product: 1:72 V-22 OSPREY Tilt Rotor The project for the innovative Bell Boeing V-22 Osprey was set up during the 1980s but only after a long and complex development process, which lasted over twenty years, did it begin its distribution to the operational departments of the United States armed forces. The Osprey is a tilt rotor equipped aircraft with large three-blade propellers that allow landing and taking off vertically like a helicopter. Flight and transfer performance is similar to that of a conventional propeller plane. Thanks to its two powerful 6,150 HP Rolls-Royce T406-AD-400 engines, it manages to exceed 500 km/h in horizontal flight. The United States Marine Corps is using the V-22 in particular for landing support operations. The Osprey took part in its first operational missions in an Iraq in 2007. Detailed plastic kit in scale 1:32
Military figures & accessories 1:72
1:72 Vietnam War - Vietn. Army/Vietcong
510006079€10.99
Article number: 510006079 Product: 1/72 Vietnam War - Vietn. Army/Vietcong The armed forces of the National Liberation Front (NLF) were composed both by regular units of the North Vietnam army and by irregulars. The term "vietcong" was used as a generic term for NLF soldiers, but in common iconography it represents the irregular guerrillas. The vietcong were armed with Soviet-produced weapons like the ubiquitous AK-47 Kalašnikov assault rifle, or the semi-automatic SKS carbine. In January 1968, they took part in the massive Tet Offensive during the night of the Vietnamese New Year.
Military figures & accessories 1:72
1:72 WW2 - British Infantry
510006056€10.99
Article number: 510006056 Product: 1/72 WW2 British Infantry On June 6th,1944, General Dempsey's troops of the British Expeditionary Force, composed by the 3rd and 50th English Division and by the Canadian 3rd Division, landed on the beaches of Normandy codenamed Sword, Juno, and Gold. The D-Day had thus come. The British Expeditionary Force was to land and quickly take over the town of Caen. Americans, landing at Omaha and Utha in the West, were to seize control of the Cotenin peninsula and the Cherbourg port. Contents 42 figures.
Military figures & accessories 1:72
1:72 WW2 - Italian Mount.Troops Alpini
510006059€10.99
Article number: 510006059 Product: 1:72 WW2 - Italian Mount.Troops Alpini During World War II, Alpini divisions where used on several fronts. In 1942 the Italian expeditionary force was sent on the Russian front to support the Wehrmacht. It included the Alpini Julia, Tridentina and Cuneense divisions. The Italian Alpini took active part at the defense of the Don front but they were outnumbered and surrounded by the troops of the Red Army. The Alpini divisions were forced to retreat with a long and heroic march, in dire conditions, through the cold wastes of the Russian steppe. During the retreat they were also engaged in tough clashes. The most famous is the battle of Nikolajewka that took place on January1943
Military figures & accessories 1:72
1:72 WWII American Infantry
510006120€12.49
THE BOX CONTAINS 48 FIGURES The 1st and 29th Infantry Division of the U.S. Army, part of the fifth Corps led by General Bradlay, landed on June 6th, 1944, on the beach between Vierville sur Mer and Sainte Honorine des Pertes. The beach is historically known with its codename in Operation Overlord: Omaha Beach. The models in this kit are represented with the typical individual equipment of U.S. Infantry: the M1 Garand rifle, the B.A.R. automatic rifle, the Thompson submachinegun and the 7,65mm Browning machinegun. Warning! Not suitable for children under 14 years.
Military model vehicles 1:72
1:72 WWII German PAK40 AT Gun w/servants
510106096€10.99
Article number: 510106096 Product: 1/72 WWII German PAK40 AT Gun w/servants The 75mm Panzerabwehrkanone Pak 40 was brought in service at the beginning of 1941 and became the standard anti-tank gun of the German army. Despite being less powerful than the more famous "88", it was employed on all the fronts with excellent results. A light and easy to handle weapon, it weighed only 1500 kg and it was able to penetrate a 70mm plate at a range of 2000 meters. Slightly modified, it was also used on tank destroyers like the Marder, the Stug III and the Hetzer.
Military aircraft models 1:72 / 1:144
1:72 XB-70 Valkyrie
510001282€52.99
Article number: 510001282 Product: 1:72 XB-70 Valkyrie Model Dim.: 79 cm Decal for one version. In the Cold War era the dream of every strategist was to own a bomber with the load capacity and autonomy of the B-52 able to fly faster than the B-58 and so the B-70 programme came into being. After years on the drawing board, and cutthroat competition between Boeing and North American Aviation, the latter’s design won the heated competition in December 1957, with an order for the first 30 aircraft to be in service by 1965. In 1959, however, it became clear that the still untested B-70 would not survive the new aerial combat scene technology and the programme was cut back to a minimum. Two prototypes were finally constructed, the first of which took to the air in September 1964, and the XB-70 Valkyries showed themselves able to fly at speeds exceeding Mach 3. Today they are considered by many scholars and airplane buffs to be the most beautiful aircraft ever constructed.
Military ship models 1:720
1:720 U.S.S. George H.W. Bush CVN77
510105534€27.99
Article number: 510105534 Product: 1/720 U.S.S. George H.W. Bush CVN77 Model Dim.: 44,7 cm Decals for one version The U.S.S. George H. W. Bush (CVN-77) is the tenth and final Nimitz class "supercarrier". Entered in service on 2009, is the most updated evolution in terms of technology and weapon systems of its class. One of the world’s largest warships, thanks to its displacement of 100,000 tons, it is powered with two Westinghouse nuclear reactors that permit, despite the impressive size, to reach 30 knots and to have a operating range almost unlimited. More than 80 aircrafts and helicopters are carried on board and are enable to enhance the military effectiveness of the warship. The "Bush" is also used for the development and testing of advanced weapon systems. On the deck of CVN-77, the first tests with unmanned drones, as the Northrop Grumman X-47B developed and designed for carrier-based operations, has been recently done.
H0 models
1:87 Locomotive BR50
510008702€19.99
Article number: 510008702 Product: 1:87 Locomotive BR50 Model Dim.: 26,6 cm The BR50 was developed from 1937 onwards as a powerful goods hauling "standard" locomotive for use on branch lines. With a total of 3164 locomotives, produced by almost all German builders beetween 1938 and 1945, the BR50 was one of the most widely used steam locomotive classes in Germany. Due to the war, the last series was technically simplified and designated BR50 UK (Umbau Kriegslokomotive). The BR50 was developed to replace obsolete steam locomotives on branch lines. At 16t, the low axle load of the BR50 made it suitable for universal use. HO/1:87 Scale
Motorcycle models
1:9 Cagiva Elephant 850 Winner 1987
510104643€64.99
Article number: 510104643 Product: 1:9 Cagiva Elephant 850 Winner 1987 Model Dim.: 23,8 cm COLOR INSTRUCTION SHEET - RUBBER PARTS - SCREWS, SPRINGS AND RUBBER TUBES The Cagiva Elefant was introduced in the early 1980s as an enduro motorcycle characterized by small to medium displacement engines. Following the acquisition of Ducati by Caviga, commercial production gradually evolved to incorporate the more powerful high performance twin-cylinder engine from 1985 onwards. The Cagiva Elefant competed against both German and Japanese motorcycles in the prestigious 1987 Paris-Dakar ‘off-road’ rally. The bike was characterized by its distinctive large fairing which covered the steel tube and light alloy trellis frame. The air-cooled twin-cylinder engine provided 80 HP at 8500 rpm and allowed the Italian bike to reach a maximum off-road speed of 185 km / h. The bike design reflected a "typical" Saharan configuration, with protective fairing, Ohlins off-road shock absorbers and low front fender. Detailed Plastic Kit
Motorcycle models
1:9 German Milit.Motorcycle w/sidecar
510007403€65.99
Article number: 510007403 Produkt: 1:9 BMW R75 German Milit.Motor.w/Sidecar Model Dim.: 26,7 cm In 1938, based on a specific request of the German army, BMW and Zundapp received the brief to start a co-joint development project able to guarantee the highest number of common components to optimize the maintenance activities and the spare parts logistic. The prototypes had been released on 1940 and the production started at the beginning of 1941. Its peculiar feature was to have the side-car wheel that was driven with an axle connected to the rear wheel of the motorcycle. These were fitted with a locking differential and selectable gear ratios to optimize the on-road / off-road performance. The twin-cylinder engine with a displacement of 750 cc was capable of delivering 26 HP. The BMW R75 was able to reach the max speed of 95 Km/h. It was widely used, proving its realiability and sturdiness, on all most important operating theaters and in all environmental conditions (from North Africa to Russia). Deatailed plastic kit of model BMW R75 German Milit. Motor. w/Sidecar in scale 1:9
Motorcycle models
1:9 KDF. 1 Typ 82 Kübelwagen
510007405€105.00
Article number: 510007405 Product: 1:9 KDF. 1 Typ 82 Kübelwagen Mod.Dim.: 41,5 cm Working suspensions - Openable lid - Higly detailed engine - Higly deteiled decals sheet - Canvas roof and windows - Working canvas roof - Steering front axle - Rubber tires - Colors instructions sheet Typ 82 Kubelwagen is one of the most famous military cars of the Second World War. It was designed by the engineer Ferdinand Porsche and produced by the German manufacturer Volkswagen. The project was born to have a simple vehicle, easy to build and easy to maintain and repair. The overall vehicle design is without bends and the bodywork plates are flat. Great simplicity even in the layout of the frame : just a central tube and the back support for the engine and the gearbox. The Kubelwagen, thanks to its petrol engine with a displacement of 998 cm3, was able to reach the max speed of 80 Km/h. The vehicle did not have 4x4 traction but it was extremely reliable on all types of terrain and it was present on all fronts, often in very tough environmental conditions, where the German Army fought during the entire World War II. The Kubelwagen could be armed with a support for a MG34 or MG42 machine gun. Detailed Plastic Kit of model
Motorcycle models
1:9 Norton Manx 500cc 1951
510004602€59.99
Article number: 510004602 Product: 1/9 Norton Manx 500cc 1951 Mod.Dim.: 22 cm This glorious English manufacturer made a comeback after the Second World War. In 1949 this famous single-cylinder 500, ridden by Daniell, won the first world championship race to be held in England, on the torturous Tourist Trophy circuit. In 1950 and 1951 it was ridden to world championship title victory by the fearless Englishman G. Duke. Innovative for its time, it was the first bike to use an upper and lower cradle-type chassis. Deatailed plastic kit of model Norton Manx 500cc 1951 in scale 1:24
Motorcycle models
1:9 NSU HK 101 "Kettenkrad"
510007404€87.99
Article number: 510007404 Product: 1:9 NSU HK 101 "Kettenkrad" Model Dim.: 32,9 cm Working suspensions - Openable lids - Higly detailed engine - Higly deteiled decals sheet - Running tracks - Tool set At the beginning, Sd.Kfz 2 "Kettenkrad" was developed as light means of transport for airborne troops. It was a small vehicle with the front similar to a motorcycle, characterized by its handlebars and its central wheel and by a rear designed to Feature a 6 wheels tracked structure. The Kettenkrad could transport 2 passengers, additionally to the driver, or transport goods and ammunitions. It could reach a top speed of 70 km/h thanks to its OHV inline-four Opel water-cooling, the same featured on Opel Olympia car. Through its tow hook it was able to drag up to 450 kg of goods as antitank cannons of moderate size. The Kettenkrad resulted to be perfect in carrying loads and people on uneven grounds, as those sandy in North Africa or muddy ones is Russian Steppe. Later, since 1944 onwards, it was used on runways for handling of jet fighters Messerschmitt Me 262 and jet bombers Arado A-234. Deatailed plastic kit of model NSU HK 101 "Kettenkrad" in scale 1:9
Motorcycle models
1:9 Suzuki RG500 XR27 Team H.B.S.
510104644€69.99
Article number: 510104644 Product: 1:9 Suzuki RG500 XR27 Team H.B.S. 1978 The Suzuki RG 500 is considered to be an icon of two-wheel racing motorcycles of the 1970s. It was specifically developed by the Japanese manufacturer Suzuki for the racing world, and built around the reliable and powerful 4-cylinder 500cc 2-stroke engine which provided up to 90 HP. With this bike Suzuki participated in the world championships in the 500 class, achieving an incredible series of consecutive victories that led to it retaining the "constructors" title for several years. One of the architects of this successful period was the British rider Barry Sheene, who also won the "pilots" title for two consecutive years, in 1976 and 1977. In addition to international competitions, the Suzuki RG 500 was particularly appreciated by private riders who raced it in both international competitions and in minor leagues. Detailed plastic kit
Motorcycle models
1:9 Triumph
510007402€41.99
Article number: 510007402 Product: 1/9 Triumph Model Dim.: 23,1 cm Decals for 4 versions. At the start of the 2nd WW, Great Britain did not have all the technical equipment needed for such a conflict, therefore a lot of vehicles were ordered urgently. Motorcycles, mainly used by the well known DR "Dispatch Riders" for communication between different units, were converted from civilian bikes with small changes, like military color and the addition of frames for the canvas bags. Triumph proposed in short time the model 3HW, based on the civilian "Tiger 80", with an overhead valve engine and parallel forks. This model served on all fronts where the British Armed Forces fought, such as Africa, Europe and Asia. After 2nd WW these motorcycles were delivered to many other nations, such as Italy and Greece, where the Triumphs served for a long time thanks to their reliability and robustness. Deatailed plastic kit of model Triumph in scale 1:9
Motorcycle models
1:9 Vespa 125 "Primavera"
510104633€49.99
Article number: 510104633 Product: 1:9 Vespa 125 "Primavera" Length of the model 200 mm UPGRADED PARTS Vespa is an icon of design and style of the "made in Italy" and a real myth on two wheels. The first Vespa was born in the second post-war period, in 1946, and was immediately characterized by simple and elegant lines, and by a practical, functional and reliable project developed around the famous steel body-frame. The effective mix of design and functionality was the strength of the Vespa, that became, in a short time, an extraordinary commercial success worldwide. During the years Vespa was able to keep its uniqueness but improved in style and features. One of the most famous versions was the Vespa Primavera 125 launched in 1968. Thanks to an improved engine, a better performance and an easiness of driving, it remained on the market throughout the 1970s. The Primavera 125 is still today one of the most preferred Vespa by collectors and fans of the famous Italian two-wheeler manufacturer Deatiled static model kit
Motorcycle models
1:9 WLA 750 US Military Motorcycles
510007401€51.99
Article number: 510007401 Product: 1/9 WLA 750 US Military Motorcycles Mod.Dim.: 27,7 cm This impressive motorcycle, built in the late 30s to the requirements of the American Police forces, and, in limited quantities, for the civil market, was used during the 2nd World War also by the American armed forces. Very sturdy and reliable, this motorbike was used by the military Police for surveillance, and by couriers for rapid delivery of messages between front line units, thanks to its good road-holding and the performance of its powerful engine. Detailed Plastic Kit of model WLA 750 US Military Motorcycles in scale 1:9
Bundle - 25 %
Model vehicles 1:24
Carson Italieri Lancia Bundle
BDL-510003658€53.36
Product bundle consisting of: 1:24 Lancia HF Integrale / Masking tape roll 3mm x18m (2) / Masking tape roll 6mm x18m (2) / Cutting Mat A 230x160mm Article number: 510003658 Product: 1:24 Lancia HF Integrale Article number: 510003658 Product: 1:24 Lancia HF Integrale Model Dim.: 16,0 cm COLOR INSTRUCTION SHEET The Lancia Delta HF four wheels-drive is considered an Icon of the Rally Competitions History. The Delta HF was produced in the second half of the 80s and participated in the World Rally Championship from 1987 to 1988 winning two world titles and achieving important results in a lot of competition as the Rallye de Monte-Carlo and the Rallye San Remo. The Lancia Delta Integrale was the evolution of the Delta HF. It was introduced in 1988 and dominated the World Rally Championship winning several constructors’ championship and an impressive number of competitions up to 1993. Updated in many aesthetic details that made it more muscular and aggressive, as the enlarged fenders and the new designed air intake on the engine bonnet, the Lancia HF Integrale was also improved in driving and engine performance. The 1995 cm3 turbocharged engine increased its power up to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and early 90s, bringing many famous pilots as Miki Biasion or Juha Kankkunen to victory. Warning! Not suitable for children under 14 years.
