Maquettes avions militaires
Maquettes avions militaires
1:32 Mirage III E/R
510002510disponible dans le commerce
Article number: 510002510 Product: 1/32 Mirage III E/R Model Dim.: 24,5 cm NEW MOULDS SUPER DECALS SHEET + PHOTO ETCHED PARTS+ COLOURED INSTRUCTION SHEET INCLUDED The Dassault Mirage III is a reference point of the French aircraft production. It has been produced from the early sixties to provide to Armée de l’Air, the French Air Force, a reliable and effective fighter aircraft. The Mirage III rapidly became a commercial success and it was widely exported to several Countries taking part to a lot of conflicts between the seventies and the eighties. Characterised by the delta wing design without horizontal tail plane, thanks to its Snecma Atar afterburning turbojet, it was able to exceed the speed of Mach. After the introduction of the single-seat interceptor Mirage IIIC, a new multirole and strike version has been implemented. The Mirage IIIE was born and it has been a successful version produced in a significant number of units. It was characterised by a forward fuselage extension to permit the installation of the new avionic system. From the same airframe, including the fitting of cameras in the nose, Dassault has also been developed the reconnaissance variant designed as Mirage IIIR. Detailed Plastic Kit of model Mirage III E/R in scale 1:32 Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes avions militaires
1:32 Panavia "TORNADO" ECR
510002517disponible dans le commerce
Article number: 510002517 Product: 1:32 Panavia "TORNADO" ECR The Tornado arose from a collaborative project between Italy, Germany, and the United Kingdom to produce a multi-role high-performance combat aircraft. The primary requirement however was to develop a ‘state of the art’ modern aircraft able to perform low-altitude penetrating strike missions. This need was met by the development of a twin-engine combat aircraft with a variable-sweep wing. The Tornado IDS (Interdictor / strike) was the first version to be released by the British Royal Air Force and designated GR.1 Tornado IDS (Interdictor / strike), an aircraft ideally suited to attack roles, was the initial version used by the Flight Squadrons of the three countries that developed the plane, the Italian Aeronautica Militare , the German Luftwaffe and the UK RAF. The Tornado ECR (Electronic Combat / Reconnaissance) was developed by Italy and Germany and was equipped to carry out missions that suppressed enemy air defences (SEAD), and to conduct electronic warfare and advanced reconnaissance Detailed plastic kit in scale 1:32
Maquettes avions militaires
1:32 TF-104G
510002509disponible dans le commerce
Article number: 510002509 Product: 1:32 TF-104G Model Dim.: 52,0 cm FULLY UPGRADED MOULDS FINELY ENGRAVED RECESSED PANEL LINES AND RIVETS - FULLY DETAILED ENGINE , COCKPIT , AND AVIONICS BAY - OPEN OR CLOSED AIR BRAKES - 2 HUGE DECALS SHEETS FOR 8 VERSIONS - INSTUCTIONS SHEET WITH COLOR PROFILES (8x4 plates) - 390 PARTS (343 PLASTIC PARTS, 47 PHOTO-ETCHED PARTS) The Lockheed F-104 Starfighter is one of the most famous fighters in the history of aviation and also one with the longest operational life: its history began at the end of the 50s and ended, for some air forces, in mid 2000s. From its unique aerodynamic design, characterized by slender fuselage and very little wing surface, was developed the combat-capable two-seat advanced trainer version TF-104. Among the most widespread version, the TF-104G, produced by Lockheed was a fundamental training step for all the combat pilots before to seat in the F-104G or F-104S single-seat fighter version cockpits. Compared to the single-seat, the TF-104G didn’t have the 20 mm gun and the centerline pylon but, thanks to the General Electric J79 turbojet engine, the pilot and the Trainer could have the same flight experience and performance of the fighter version. A lot of N.A.T.O. air forces used the TF-104G to perform training duties as Belgium, Holland, Norway, Spain, Turkey, Germany and Italy. Deatailed plastic kit of model TF-104G in scale 1:32
Maquettes avions militaires
1:32 Tornado IDS 40e anniversaire
510002520disponible dans le commerce
Numéro d’article: 510002520 Produit: 1:32 Tornado IDS 40th Anniversary Le projet du Tornado est né de la collaboration entre l'Italie, l'Allemagne et le Royaume-Uni pour réaliser un avion de combat multifonction avec des performances de vol élevées. C’est ainsi qu’a été développé un avion bimoteur, avec une configuration biplace et des ailes à géométrie variable pour mieux répondre à son rôle principal : un chasseur-bombardier supersonique de basse altitude en mesure de « suivre » le profil du terrain Le Tornado IDS (Interdictor/Strike), idéal pour les missions d’attaque, a été le premier à être utilisé par les services opérationnels de vol des trois pays qui ont développé le projet. À partir du projet initial, la version ECR (Electronic Combat/Reconnaissance). Le Tornado IDS a été utilisé dans différents scénarios où il a pu démontrer son efficacité opérationnelle.
Maquettes avions militaires
1:48 A-10C " Blacksnakes " (Noyaux noirs)
510002725disponible dans le commerce
Référence article: 510002725 Article: 1:48 A-10C "Blacksnakes" Taille du modèle: 33,8 cm Ce grand bimoteur a été réalisé pour l’aviation américaine comme avion d’appui direct aux troupes et pour le rôle de chars de chasse. Fortement blindé dans toutes les zones vitales et équipé d’un armement lourd de lancement et de chute, l’A-10 est toutefois un avion très manœuvrable à basse altitude et cet atout est fondamental pour survivre à la réaction contre-aérienne de l’adversaire. Le Thunderbolt est pratiquement fabriqué autour du formidable canon GAU-8 de 30 mm qui est en mesure de perforer, grâce à ses qualités balistiques exceptionnelles et à sa munition spéciale, les blindages d’un char d’assaut. Au milieu des années 2000, l’A-10 dans sa version « C », a été amélioré pour mieux s’adapter aux changements des exigences opérationnelles. En effet, l’A-10C constitue l’évolution plus moderne et actuelle du solide et fiable avion d’attaque au sol en mesure d’utiliser les systèmes d’arme, d’acquisition de cibles et de pointage les plus avancés.
Maquettes avions militaires
1:48 B-25G Mitchell
510002787disponible dans le commerce
Article number: 510002787 Product: 1:48 B-25G Mitchell Model Dim.: 33,6 cm COLORED INSTRUCTION SHEET EXTRA CATALOGUE SUPER DECAL SHEET FOR 4 VERSION The North American B-25 Mitchell was probably one of the best medium bombers of World War II. The first flight of the twin-engine North American plane was done in 1939. Powered by two 1750 HP Wright R-2600 Cyclone engines, the B-25 was characterized by an extraordinary operational flexibility. It took its nickname in honor of General Billy Mitchell considered, in effect, the father and the founder of United States Air Force. From the first versions, used for the main task of medium bomber in level flight, were progressively develop and implement further variations. In particular, following the specific need for a ground attack and close support aircraft, was made the B-25G. It was equipped with a closed nose, instead of the transparent one, with two .50 machine-guns and an heavy 75mm cannon inside which made it a real "piece of flying artillery". Detailed Plastic Kit of model B-25G Mitchell in scale 1:48
Maquettes avions militaires
1:48 Brit. Spitfire Mk.IX
510002804disponible dans le commerce
Article number: 510002804 Product: 1:48 Brit. Spitfire Mk.IX The Supermarine Spitfire is considered to be one of the most famous fighter aircraft in aviation history and an "icon" of British aeronautical production. The well armed low wing single engine aircraft along with the Hawker Hurricane, forme d the backbone of the Royal Air Force fighter units engaged against the German Luftwaffe during The Battle of Britain. The Spitfire’s success in the Battle helped to cement its status as an iconic aircraft. It was celebrated for its elliptical wing design and powerful Rolls Royce Merlin engine. During the war, in response to the technological innovations of the Luftwaffe that led to the development of the formidable Focke Wulf Fw 190, the Spitfire itself was constantly evolved in its aerodynamic configurat ion and engine. The Spitfire Mk IX version was able to compete on equal terms with the most advanced German fighters of the period and was produced in sufficient numbers to meet operational needs. Detailed plastic kit in scale 1:32
Maquettes avions militaires
1:48 CA. 172 Skyhawk II
510002764disponible dans le commerce
Article number: 510002764 Product: 1/48 CA. 172 Skyhawk II Model Dim.: 17,2 cm SUPER DECALS SHEET Decals for 3 versions The single-engine fixed-wing Cessna 172 Skyhawk is a real milestone of the civil and commercial aviation history. It has been developed during the ‘50s and it is characterized either for its extraordinary longevity or for the incredible commercial success with more than 43,000 units produced. The "Skyhawk" is a single-engine four-seater high-wing plane and is used both as light commercial aircraft and as training plane. Characterized by its simple design based on the high wing and the frontal tricycle landing gear, it is able to reach the cruiser speed of 230 Km/h and to carry on board one pilot and three passengers A curiosity: on May 1987 the Skyhawk has ben used by a young German pilot to fly an unauthorized flight from Helsinki through Soviet airspace and to land close to Red Square in Moscow. Detailed Plastic Kit of model CA. 172 Skyhawk II in scale 1:48
Maquettes avions militaires
1:48 F-22 RAPTOR
510000850disponible dans le commerce
Article number: 510000850 Product: 1/48 F-22 RAPTOR Model Dim.: 41 cm Decals for one version. The F-22 Raptor represents the new air superiority fighter presently under construction for the U.S. Air Force. It will eventually substitute the F-15 Eagles which have been in service since the late seventies. The Raptor design uses the most recent engine technologies to reach super-sonic speed without afterburners. Furthermore it will be equipped with highly sophisticated electronic equipment for its weapons control. The weapons are carried inside the fuselage to avoid radar detection and to improve the planes aerodynamic features.
Maquettes avions militaires
1:48 FiatCR.42 "Battle of Britain 80thA."
510002801disponible dans le commerce
Article number: 510002801 Product: 1:48 FiatCR.42"Battle of Britain 80thA. Model Dim.: 17,3 cm Super Decals Sheet Starting from the C.R. 32 "Freccia" success proved by a great reliability and operational efficiency during the Spanish Civil War, the Italian manufacturer Fiat developed, in the late ‘30s, the new C.R. 42 "Falco". The new biplane single-seat fighter had - as its predecessor - the fixed landing gear and the open cabin but was equipped with important innovations such as the alloy and steel frame covered by canvass and metal paneling. Thanks to Its supercharged air-cooled Fiat A.74 radial engine the Fiat C.R. 42 was able to reach 400 Km / h. It had an extraordinary maneuverability, much appreciated by the Italian pilots, but suffered the "biplane" configuration limits. It was able to successful engage the Gloster Gladiators but it was soon outclassed by faster and heavily armed monoplanes as the Hawker Hurricane and the Supermarine Spitfire. Several Fiat C.R. 42, together with G.50 fighters and BR.20, CANT Z 1007 bombers has been used by the Italian Regia Aeronautica during the Battle of Britain within the "Corpo Aereo Italiano". Detailed plastic kit
Maquettes avions militaires
1:48 Forge à couteaux BF109K-4
510002805disponible dans le commerce
Article number: 510002805 Product: 1:48 Messerschm. BF109K-4 Model Dim.: 18,8 cm SUPER DECALS SHEET FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET FIGURE NOT INCLUDED - CONTAINS ONE MODEL The Messerschmitt Bf 109 is undoubtedly one of the best-known fighters of the Second World War and is considered an iconic aircraft of the German Luftwaffe. During the conflict, the engines and armaments were regularly upgraded to be kept in line with the emerging, more modern enemy fighters. The Bf 109 K-4 "Kurfürst", introduced at the end of 1944 and substantially derived from the G model, was the last version produced of this famous German fighter. It was equipped with a powerful 2000 HP Daimler-Benz DB 605 supercharged engine and was able to exceed 720 km/h. Another notable feature was its impressive climbing capability which was even superior to that of allied fighters. Armed with a powerful 30 mm MK108 cannon installed in the propeller hub, and with two MG 131 13 mm. machine guns. on the engine cowling, the Bf 109 K-4. Detailed plastic kit in scale 1:48
Maquettes avions militaires
1:48 Henschel Hs 123
510002819disponible dans le commerce
Article number: 510002819 Product: 1:48 Henschel Hs 123 During the 1930s Henschel was tasked to design and build a ground attack aircraft that could provide support to ground troops. This led to the creation of the robust Henschel Hs-123 biplane, which was supplied to flying Squadrons in 1935. The first operational deployment of the aircraft took place during the Spanish Civil War to the Condor Legion squadrons. Due to its 880 hp BMW radial engine the Hs-123 was able to reach a top speed of 340 km/h and could carry a large offensive payload. During the Second World War, despite its proven reliability, the rapid technological evolution of aircraft design, engines and performance relegated the Hs-123 to supporting roles. On the Eastern Front for example, it was used primarily in a night-time ground attack role. Detailed plastic kit
Maquettes avions militaires
1:48 Hurricane Mk.II C
510002828disponible dans le commerce
Référence article: 510002828 Produit: 1:48 Hurricane Mk.II C Le Hawker Hurricane fut le chasseur le plus utilisé par la Royal Air Force de l'armée britannique au début de la Deuxième Guerre mondiale. Il a joué un rôle déterminant dans la victoire de la R.A.F. lors de la Bataille d'Angleterre, mais au cours de la Guerre, il a progressivement cédé sa place de chasseur de première ligne au plus moderne Spitfire. L'Hurricane a progressivement changé de rôle en se distinguant par des versions et des équipements très spécifiques. L'Hurricane Mk. IIC était en effet équipé d'un armement important composé de 4 canons Hispano-Suiza puissants de 20 mm avec près de 400 coups montés sur les ailes. L'adoption des canons de 20 mm à la place des mitrailleuses traditionnelles de 7,7 mm rendit l'Hurricane extrêmement efficace lors des missions d'attaque au sol et de support rapproché. En outre, le Hurricane Mk. IIC fut efficacement utilisé comme chasseur de nuit.
Maquettes avions militaires
1:48 HUS-1 Sea Horse / UH-34D
510002776disponible dans le commerce
Référence article: 510002776 Article: 1:48 HUS-1 Sea Horse / UH-34D Taille du modèle 36 cm SUPER DECALQUES POUR 5 VERSIONS - FRET PHOTOGRAPHIE - FICHE D'INSTRUCTIONS COULEUR À partir du célèbre hélicoptère anti-sous-marin HSS-1 « Seabat » de l’américain Sikorsky, pro-duit depuis le milieu des années 50, fut développée, quelques années plus tard, une version dédiée à l’exécution de missions de transport tactique : le HUS-1 Seahorse. L’hélicoptère fut largement utilisé, à partir de 1957, par le Corps des Marines et s’est immédiatement révélé fiable et robuste. Il pouvait transporter jusqu’à 16 hommes entièrement équipés ou 1 300 kg de cargaison. Grâce à son moteur à pistons Wright R-1820 Cyclone, le Seahorse pouvait atteindre une vitesse de 200 km/h. Ses caractéristiques opérationnelles ont accéléré sa propagation. Également employé par l’U.S. Army (avec le sigle H-34), une version armée de mitrailleuses M60 de 7,62 mm fut réalisée, largement utilisée pendant la première phase de la Guerre du Vietnam. Plus lourd encore était l’armement de la version française, qui participa au conflit d’Algérie, équipée de 3 mitrailleuses Browning de 12,7 mm et d’un canon MG 151 de 20 mm.
Maquettes avions militaires
1:48 Lockheed TR-1A/B
510002809disponible dans le commerce
Article number: 510002809 Product: 1:48 Lockheed TR-1A/B Model Dim.: 39,9 cm Extra Catalogue - One Model Kit included Two Versions Available - Super Decals Sheet The Lockheed U-2 is one of the best known high-altitude reconnaissance aircraft in the history of aviation and an icon of the Cold War. The development of the aircraft was approved in the early 1950’s with the first flight in 1955. The U-2 was characterized by its large wing area and wingspan. Its aerodynamic structure enabled it to operate at an altitude of 70,000 feet (over 21,000 meters) and undertake intelligence gathering operations using highly advanced photographic and video recording systems. It was first used operationally by the C.I.A. and then by the U.S.A.F. The design was improved over time, and ultimately led to the development of the TR-1A version to carry out high altitude tactical reconnaissance missions. For this role the TR-1 was equipped with side-looking radar, modern avionics systems and ECM (Electronic countermeasures). Detailed plastic kit
Maquettes avions militaires
1:48 Macchi MC 200 Série VII
510002815disponible dans le commerce
Article number: 510002815 Product: 1:48 Macchi MC 200 Serie VII Designed by the celebre engineer Mario Castoldi, the Macchi MC 200 has represented a significant production evolution of the Italian fighter aircrafts. Compared to the biplanes Fiat CR 32 and Fiat CR 42 that were the main Italian fighters squadrons structure at the beginning of the Second World War, the Macchi MC 200 distinguished itself, together with its contemporary Fiat G50, for its monoplane configuration and for the entire metallic airframe structure. The 14 radial cylinder Fiat A.74 RC 38 double star engine was able to release 840 HP and allowing the Macchi Mc 200 to reach speeds of 500 Km/H. In comparison with the Allied fighters, it resulted to be underpowered and, neither the less, a lower fire capacity. Two 12,7mm Breda-SAFAT machineguns mounted over the characteristic engine bulged nacelle, were the only onboard armament available. In the latest versions, two additional 7,7mm Breda-SAFAT machineguns were incorporated in the wings. It has been deployed by the Regia Aeronautica on the main Second World War fronts: Africa, Mediterranean Sea, Balkans and in Russia. Detailed plastic kit in scale 1:35
Maquettes avions militaires
1:48 P-40E/K Kittyhawk
510002795disponible dans le commerce
Article number: 510002795 Product: 1:48 P-40E/K Kittyhawk Length of the model 197 mm EXTRA CATALOGUE - NEW DECALS SHEET Based on the design of the previous single-seat radial engine fighter Curtiss P-36, the Curtiss P-40 has become one of the most famous and used aircraft of the Second World War. Between 1941 and 1944 he also played a key role in many operational theaters from North Africa to Italy, from China to the South Pacific. Characterized by a very robust and reliable aerodynamic structure, the Curtiss P-40 was equipped with an Allison V-12 engine, capable of delivering more than 1,150 HP. Thanks to it, the Curtiss P-40 was able to reach the speed of 580 Km / h. It served as air superiority fighter and fighter bomber. One of the most successful version was the P-40E. Used by U.S. fighter squadrons and, as Kittyhawk , by Commonwealth Air Forces, the P- 40E was heavily armed with six 12.7 mm. M2 Browning machine guns installed in the wings. Furthermore, thanks to its under wings hard-points, able to carry nearly 900 Kg. of bombs, it was also able to satisfy close air support duties. Detailed Plastic Kit
Maquettes avions militaires
1:48 S-3 A/B VIKING
510002623disponible dans le commerce
Article number: 510002623 Product: 1:48 S-3 A/B VIKING The S-3 Viking is the American Marines’ standard anti-submarine aircraft for shipborn used since the mid-70s. This big twin-jet plane is equipped with cutting-edge electronics to control sea missions and surveillance in close contact with ships and helicopters entrusted to protect aircraft-carriers. Viking II has an ample range, thanks to in-flight refuelling to ensure long patrol periods. Additionally, Viking II can transport plenty of material in its large hold: torpedoes, depth charges, and an enormous quantity of buoys to receive underwater signals. Detailed plastic kit
Maquettes avions militaires
1:48 SAAB JA 37 Jaktviggen
510102785disponible dans le commerce
Article number: 510102785 Product: 1:48 SAAB JA 37 Jaktviggen Model Dim.: 34,2 cm ORIGINAL MOULDS FROM ESCI - COLOR INSTRUCTION SHEET - SUPER DECALS SHEET FOR 4 VERSIONS The Saab Viggen fighter has been, for years, the backbone of the Swedish Air Force. The first AJ 37 Viggen has been developed to be a multi-role combat aircraft able to perform air defense, anti-ships and ground attack missions. Later on, in order to increase the effectiveness in the Swedish air defense system, the JA-37 "Jaktviggen" version was developed. It has been equipped with a new set of avionics, radar and weapon system able to enhance its role of all-weather fighter-interceptor aircraft. In terms of design the Viggen was characterized by the adoption of the delta-canard aerodynamic solution and it was powered by the big and powerful Volvo RM8 afterburning turbofan. Thanks to it the Viggen was able to reach the max speed of Mach 2,1. The Saab Viggen has been progressively replaced by the new and technologically advanced Saab JAS 39 Gripen. Detailed Plastic Kit of model SAAB JA 37 Jaktviggen in scale 1:48
Maquettes avions militaires
1:48 US F-15E Strike Eagle
510002803disponible dans le commerce
Numéro d’article: 510002803 Produit: 1:48 US F-15E Strike Eagle Le F-15 Eagle fut imposé au cours des années 1970 pour pouvoir équiper les unités de vol de la U.S. Air Force avec un chasseur avancé et très performant. C’est de sa cellule aérodynamique qu’a été développé le chasseur-bombardier biplace tous-temps F-15E Strike Eagle. Conçu pour les missions d’attaque au sol, de bombardement et d’interdiction, il est entré en service dans l’USAF à la fin des années 1980. Il conserve les caractéristiques de la conception originale du F-15 telles que les deux dérives de queue et l’aile médiane robuste tout en adoptant la cabine biplace en tandem capable d’accueillir l’officier des systèmes d’armes pour la gestion de l’itinéraire, le suivi des cibles et l’utilisation de contre-mesures électroniques. Il a été utilisé dans de nombreuses opérations à commencer par les campagnes Desert Shield et Desert Storm au début des années 1990.
Maquettes avions militaires
1:48 US F-16C
510002825disponible dans le commerce
Le F-16 Fighting Falcon, produit par la société américaine General Dynamics à partir de la fin des années 70, est une véritable icône de l’aviation militaire. Au début, développé pour répondre aux besoins de l’U.S. Air Force d’avoir un avion de chasse monoplace diurne de supériorité aérienne, le projet a progressivement évolué et un avion de combat multi-rôle tous-temps a été créé, caractérisé par une flexibilité opérationnelle extraordinaire. Le F-16 se caractérise par un design original, facilement reconnaissable par le « canopy » (verrière) à bulle. qui garantit une grande visibilité au pilote. De plus, le F-16 adopta des solutions innovantes telles que la cloche latérale, le « fly-by-wire » et de modernes systèmes avioniques pour le vol et le combat. Apprécié par les pilotes pour sa grande manœuvrabilité et fiabilité, il est armé d’un canon M61 Vulcan de 20mm. Grâce à ses nombreux points d’attaque, il peut utiliser un arsenal offensif varié de missiles et de bombes. Le F-16 a été employé par de nombreuses forces aériennes du monde entier et il a effectué, souvent avec une grande efficacité, un nombre important de missions opérationnelles.
Maquettes avions militaires
1:72 A-129 Mangusta
510000006disponible dans le commerce
Article number: 510000006 Product: 1:72 A-129 Mangusta Model Dim.: 17 cm Decals for one version This light combat helicopter has been designed for the Italian Army and has been delivered to various units. The manufacturer is participating at various international competitions in order to deliver first orders to other armed forces. The Mangusta is typical for its sleak and elegant shape which contributes to its manoeuvrability. This helicopter is equipped with sophisticated night vision equipment which serves for its anti-tank missile armament. Other complex flight control instruments are also part of the Mangustas electronic gear.
Maquettes avions militaires
1:72 AC-119K Stinger Gunship
510001468disponible dans le commerce
L’US-Air-Force a utilisé l’avion de transport lourd C-119 comme base de transformation pour sa nouvelle forteresse volante. Cette construction spéciale fut particulièrement engagée au Vietnam contre les concentrations de troupes ennemies et plus particulièrement contre les troupes de ravitaillement et de réserve. Grâce à son armement puissant (2 canons de 20mm et 4 de 7,62mm), la version Ac-119 K fut une arme très efficace contre les colonnes de camions. Une version à l’armement plus légère fut construite sous la dénomination AC-119 G. Outre les deux turbopropulseurs, cet avion fut également équipé de deux réacteurs lui permettant un décollage court même avec le plein de munition. Avec l'entrée en service des AC-130H plus puissants, ces appareils sont progressivement cédés à l'armée de l'air sud-vietnamienne qui les utilise jusqu'à la chute du gouvernement de Saigon.
Maquettes avions militaires
1:72 AH-1W Super Cobra
510000160disponible dans le commerce
Article number: 510000160 Product: 1:72 AH-1W Super Cobra Model Dim.: 20 cm Decals for one version Based on the helicopter design Bell AH 1 Huey Cobra which was used in great numbers in Vietnam, Bell developed the improved version AH-1 W Super Cobra which has better fighting power and other features. First delivery of this prototype to the US-Marine-Corps was 1986. The armament consists of a 20 mm-rapid fire gun as well as alternating missile: Tow, Sidewinder, Hellfire, Zuni and 70 mm rocket.
Maquettes avions militaires
1:72 AH-64 D Apache Longbow
510100080disponible dans le commerce
Article number: 510100080 Product: 1:72 AH-64 D Apache Longbow Model Dim.: 21 cm Decals for 3 versions. The Apache is certainly the most powerful and sophisticated combat helicopter thanks to its robust fuselage, which was designed without saving costs, as well as remarkable electronic equipment and massive weapons systems. Presently modifications are carried out to adapt the D model equipped with Longbow radar. This allows more efficiency in using anti-tank missiles and greater capacity to direct its fire-power.
Maquettes avions militaires
1:72 B-58 HUSTLER
510001142disponible dans le commerce
Article number: 510001142 Product: 1/72 B-58 HUSTLER Model Dim.: 40,9 cm SUPER DECALS SHEET FOR 6 VERSIONS This 4-engined delta wing bomber came into service with the US Strategic Air Force at the beginning of the 60s and was, at that time, the pinnacle of technology. The B-58 could reach supersonic speeds even at full load and was specifically designed to carry nuclear weapons so as to provide a fast response to a Soviet attack, which, back in the Cold War of the 50s, was considered a constant threat. Detailed Plastic Kit
Maquettes avions militaires
1:72 BF109 F-4 et FW 190 D9 War Thunder
510035101disponible dans le commerce
Article number: 5100351041 Product: 1:72 BF109 F-4 and FW 190 D9 War Thunder Model Dim.: 13,3 cm & 12,5 cm - EXTRA CATALOGUE - Two models - Video Game bonus code - Glue and stand base included! In 1943, the Bf 109 entered service, while its performance was less then stellar, its worth derived from the ability to be easily modified into dedicated fighter bomber, high altitude interceptor or reconnaissance. Likewise great care was taken to make sure the G6 could fit heavy armament for attacking bombers, which were beginning to appear in force over Germany, and the shortcoming of the Fw 190’s at high altitude became increasingly apparent. Kurt Tank, the designer of the venerable Fw-190 lineup quickly realized by 1943 that the field of aerial warfare was changing rapidly. The world had moved on beyond dive bombers, and the allies had begun forming massive, four engine bomber wings that devastated. Axis ground troops and factories. At the time, Fw-190’s played similar rolls to the American P-47 Thunderbolts, serving as ground attack planes and low altitude interceptors. Detailed Plastic Kit of model
Maquettes avions militaires
1:72 F-4E/F Phantom II
510001448disponible dans le commerce
Article number: 510001448 Product: 1:72 F-4E/F Phantom II Model Dim.: 26,7 cm SUPER DECALS SHEET FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET Designed by the American company McDonnell Douglas and entered service during the 1960s, the F-4 Phantom II two-seater all-weather supersonic fighter-bomber is one of the best-known and most famous aircraft in the history of military aviation. Initially designed for the U.S. Navy, it was also widely used by the U.S. Air Force and had significant commercial success around the world. The "E" version of the Phantom II, in detail, developed for the U.S. Air Force, was characterized by an M61 Vulcan cannon positioned in the nose and could be armed, for interception missions, with the AIM-9 Sidewinder and AIM-7 Sparrow air-to-air missiles. The two powerful General Electric J-79 engines allowed the Phantom II to exceed the speed of 1,240 knots (approximately 2,300 km / h). Several planes are still flying in the air forces of Greece, Turkey and Korea, undergoing extensive modernization programs. Detailed plastic kit
Maquettes avions militaires
1:72 F-51D Guerre de Corée
510001452disponible dans le commerce
Article number: 510001452 Product: 1:72 F-51D Korean War The North American single-seat fighter P-51 Mustang is, without a doubt, one of the most famous aircraft of the history and it is considered the best fighter powered with traditional piston engine of the Second World War. The P-51 was developed very quickly and was built around the Packard V12 engine, the well-known and reliable Rolls-Royce Merlin engine manufactured under license in the United States, capable of delivering more than 1,600 HP. Thanks to its engine, the Mustang was able to reach the speed of 700 Km/h. The P-51D, the most famous and successful version, was armed with six 0.5 M2 Browning machine guns installed in the wings. The Mustang was used in all war theaters, but it best known duty was to escort bombers in raids over Europe. At the end of the Second World War the "Mustang" continued to be deployed on various operational fronts. The F-51 (a new designation adopted in 1948 where F stood for fighter) also participated in the Korean War. It continued to be a highly reliable aircraft and thanks to its extensive range, could successfully carry out operations that the most modern jet aircraft of the period were unable to perform. Armed with rockets and bombs, it was used for ground attack missions and could also offer a close support capability to ground troops. Detailed Plastic Kit
Maquettes avions militaires
1:72 F-5E Swiss Air Force
510001420disponible dans le commerce
Article number: 510001420 Product: 1:72 F-5E Swiss Air Force Model Dim.: 20,0 cm EXTRA CATALOGUE COLORS INSTRUCTIONS SHEET - SUPER DECALS SHEET FOR 3 VERSIONS Developed in the early seventies from the American company Northrop, as direct evolution of its predecessor, the F-5E Tiger II was characterized by an increased power, a better maneuverability and better air-to-air performance. Its real strength, however, was represented by the low production and maintenance costs compared to a good combat effectiveness. Thanks to its cost / performance ratio the F-5E was chosen to equip the fighter squadrons of several air forces. Among these countries, the Swiss Air Force considered the F-5E suitable to meet the real unique features of which the Alpine Country needed. It was also produced under license by the Helvetic country. The F-5 Tiger II is armed with two 20 mm. guns installed in the nose and it can use a wide variety of offensive load on its hardpoints. Detailed Plastic Kit of model F-5E Swiss Air Force in scale 1:72
Maquettes avions militaires
1:72 F/A-18E Super Hornet
510002791disponible dans le commerce
Article number: 510002791 Product: 1:72 F/A-18E Super Hornet Model Dim.: 37,5 cm SUPER DECALS FOR 3 VERSIONS - COLOR INSTRUCTIONS SHEET The Boeing F / A-18E Super Hornet is a modern twin-engine, carrier-capable, single-seat fighter directly derived from the original design of the McDonnell Douglas F / A-18 Hornet. Larger and heavier than its predecessor, it is characterized by significantly improved in flight and combat performances. The easiest to recognize features are the new shape of the wings, able to guarantee the highest standard in terms of maneuverability, the intake ramps for the engines and the tail. It entered in service with the United States Navy in the early 2000s to replace the F-14 Tomcats to perform the fleet air defense tasks. With and increased mission range and the adoption of improved avionic systems it is one of the most effective carrier-based fighter. It has a 20 mm M61 internal gun and can carry air-to-air missiles in its hard points. To perform its secondary role of attack plane it can also carry an impressive variety of air-to-surface weapons.
Maquettes avions militaires
1:72 F4U-7 Corsair
510001313disponible dans le commerce
Article number: 510001313 Product: 1/72 F4U-7 Corsair Model Dim.: 14 cm Decals for 3 versions. The F4 Corsair is considered to be one of the most successful carrier-based fighter aircraft to be developed during the Second World War, although, when it first came into service, the technical experts of the U.S Navy considered this large cantilever wing aircraft to be unsuitable for use on aircraft carriers. The Corsair obtained many outstanding aerial victories. In the Pacific Ocean theatre alone, the F4U shot down over 2,000 Japanese aircraft, with a loss of only 189 Corsairs, resulting in a kill / loss ratio which has never been equaled throughout history. This aircraft was produced for ten years, until December 1952, a fact which established the Corsair as the American aircraft to remain in production for the longest period of time after the Second World War. The F4 was also used extensively by the French Naval Aviation during the war in Indochina and the Suez campaign of 1956.
Maquettes avions militaires
1:72 Fiat BR.20 Cicogna
510001447disponible dans le commerce
Article number: 510001447 Product: 1:72 Fiat BR.20 Cicogna Model Dim.: 17,3 cm SUPER DECALS SHEET FOR 5 VERSIONS - COLOR INSTRUCTIONS SHEET FIGURE NOT INCLUDED - CONTAINS ONE MODEL The BR 20 "Cicogna" low wing medium bomber was developed by the Italian aircraft manufacturer Fiat during the 1930’s. It entered into service in 1936 and was characterized by its metal frame and retractable landing gear. Modern and fast for the period, it was deployed by the "Aviazione Legionaria" and had its baptism of fire in 1937 during the Spanish Civil War. In September 1940, the "Corpo Aereo Italiano", consisting of the 13th and 43rd Stormo da Bombardamento were similarly equipped with the BR-20. The Stormi were stationed in Belgium and supported the Luftwaffe during the Battle of Britain. Despite operational comparisons with modern R.A.F. fighters that exposed the BR-20’s limits, it was used for the duration of WW2 on various fronts by several Regia Aeronautica bomber squadrons. Detailed plastic kit in scale 1:72
Maquettes avions militaires
1:72 Fokker F-27 Maritime Patrol
510001455disponible dans le commerce
Article number: 510001455 Product: 1:72 Fokker F-27 Maritime Patrol The twin-engine Fokker F-27 Friendship was developed during the fifties by the Dutch airplanes manufacturer to provide a valid successor to the old traditional piston engine Douglas DC-3 in service since the World War II. The Fokker F-27 immediately achieved a good commercial success in civil and military uses and it was even produced under licence in the United States. Thanks to its two 2,250 Hp Rolls-Royce turboprop engines the Fokker was able to reach the max speed of 460 Km/h. Since its start of production it was adopted by a lot of airlines that found in it the best solution for short-haul routes. The adoption of two turboprop engines, compared to traditional piston engines, reduced vibrations and provided an improved comfort on board. The plane was very versatile and was widely used for freight transport activities, troop transport duties and maritime patrol. Scope of delivery: Kit, Instructions, Decor
Maquettes avions militaires
1:72 Macchi
510001439disponible dans le commerce
Article number: 510001439 Product: 1:72 Mc 202 Folgore Model Dim.: 12,3 cm SUPER DECALS SHEET FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET FIGURA NON INCLUSA - CONTIENE UN MODELLO The introduction of the Macchi MC 202 Folgore was a significant development for the fighter squadrons of the Italian Regia Aeronautica. Stylishly designed from an aerodynamical perspective, it was fitted with the powerful German DB 601 engine produced under license by the Italian aeronautical industry. The engine and overall aeronautical performance of the aircraft provided the Regia Aeronautica with a fighter capable of actively engaging Allied fighters. The flight performance compared to the previous generation of fighters equipped with radial engines, such as the Fiat G-50 and the Macchi Mc-200, was in fact much better. Manoeuvrable and fast (it was able to reach 600 km h), it was armed, in the early versions, with two 12.7 mm Breda-SAFAT machine guns installed in the nose. Only in later versions were the armaments improved with additional machine-guns installed in the wings. Detailed Plastic Kit
Maquettes avions militaires
1:72 Sea Harrier FRS. 1
510001236disponible dans le commerce
Article number: 510001236 Product: 1:72 Sea Harrier FRS. 1 The British Aerospace Sea Harrier was a VTOL / STOVL (Short take-off and vertical landing) capable fighter, developed to equip the air arm sections of the British Royal Navy. It entered into service during the late ‘70s and early ‘80s with the main operational role of fleet air defence aircraft. In 1982 it was deployed on HMS Invincible and HMS Hermes during the Falklands war, fully demonstrating its operational effectiveness during the conflict. Unable to match the speed and flight characteristics of opposing aircraft such as the Mirage III, it was nevertheless extremely manoeuvrable and reliable in all operating conditions. The Sea Harrier was equipped with an effective offensive armament capability, consisting of two 30mm ADEN guns installed in pods under the fuselage and by 4 sub-wing hard points to launch air-to-air missiles. Detailed plastic kit
Maquettes avions militaires
1:72 Sepecat JAGUAR GR.1/3 R.A.F.
510001459disponible dans le commerce
Article number: 510001459 Product: 1:72 Sepecat JAGUAR GR.1/3 R.A.F. The Jaguar ground attack aircraft, born in the 1960s from a collaborative project of the French and British aviation industry, was used by the Royal Air Force until the late mid-2000s, demonstrating extraordinary longevity and operational efficiency. Thanks to its two turbojet engines it was able to reach and exceed Mach 1.6. It has been used, carrying out numerous missions, in operational areas characterized by a high level of complexity, including the Balkans and Iraq. In particular, the "all-weather" Jaguar Gr. 3 single-seater version has been significantly updated in avionics and has been equipped with terrain mapping and GPS tracking systems to optimize the role of ground attack aircraft. Detailed plastic kit in scale 1:32
Maquettes avions militaires
1:72 UH-1B " Huey " (hélicoptère)
510100040disponible dans le commerce
Article number: 510000040 Product: 1:72 UH-1B Huey Model Dim.: 18 cm Decals for 3 versions This helicopter, designed by Bell at the end of the fifties, is still in service to-day in its newer and later versions. It is by far the most widely used rotating wing aircraft the world has seen. The Huey was extensively used during the Vietnam conflict by the U.S. Forces, mainly in support and attack sorties equipped with various armament. Thanks to its reliability and robust construction the UH-1 was quickly aquired by the armed forces of many countries (among others Italy, Japan, Sweden, and Holland). UH-ls remained in ?service until the end of the seventies and were then substituted by its more modern and sophisticated versions. Technical data: Fuselage length: 11.70 m
Maquettes avions militaires
1:72 US F-4F Corsair Guerre de Corée
510001453disponible dans le commerce
Article number: 510001453 Product: 1:72 US F-4F Corsair Korean War The F-4U Corsair was developed and produced by the Vought aircraft company as a U.S. Navy carrier- borne fighter. It entered service at the end of 1944 and immediately proved to be extraordinarily efficient, robust and reliable. On the Pacific front it scored a high number of shot down enemy aircraft. The Corsair also had the most powerful radial engine available at the time within American industry. This was the 18-cylinder Pratt & Whitney R-2800 Double Wasp capable of reaching over 2,000 hp. The powerful engine was integral to the aircraft design which was created with the characteristic and easily recognizable gull wing. Its reliability resulted in exceptional operational longevity and deployment in large numbers during the Korean War. The primary role was no longer that of fighter however, as that role was now performed by jet aircraft, but it became a day / night ground attack aircraft offering close support to ground troops. Detailed plastic kit in scale 1:72
Maquettes avions militaires
1:72 US NF F-14A vs A-4F
510001422disponible dans le commerce
Article number: 510001422 Product: 1:72 US NF F-14A vs A-4F Model Dim.: 26,52cm - 16,97 cm CONTAINS 2 MODELS - COLORS INSTRUCTIONS SHEET The American supersonic twin-engine Grumman F-14 Tomcat was the icon of the U.S. Navy fighter squadrons during the ‘80s and ‘90s. it was characterized by the adoption of the variable-sweep wing, the twin-tail and the tandem two-seat cabin. The "Tomcat" provided an impressive operational performance. Thanks to its two General Electric Afterburning turbofans it was able to reach the max speed of Mach 2.34. It was armed with a 20 mm M61 Vulcan rotating gun and it could use, in addition to the more conventional AIM-9 Sidewinder and AIM-7 Sparrow, the AIM-54 Phoenix radar-guided long-range missiles. The best pilots of the U.S. Navy Fighter Squadrons took part in combat training courses at the famous Fighter Weapon School better known as "Top Gun". The F-14 pilots could improve their combat skills and capability on the F-14 confronting against A-4 Skyhawk and F-5 Tiger II used by the school to simulate the flying characteristics of the Soviet Mig. Detailed Plastic Kit of model US NF F-14A vs A-4F in scale 1:72 Attention ! Ne convient pas aux enfants de moins de 14 ans.
Maquettes avions militaires
1:72 X-47B
510001421disponible dans le commerce
Article number: 510001421 Product: 1:72 X-47B Model Dim.: 26,2 cm - 16,1 cm COLORS INSTRUCTIONS SHEET The Northrop Grumman X-47B is an demonstration unmanned combat air vehicle (UCAV) expressly designed and developed to operate from the flight decks of the US Navy aircraft carriers. The X-47B flew for the first time in 2011 and has performed, in the following years, several operational tests completed in 2015. The X-47B was used in the test cycles on board the U.S.S aircraft carrier George H.W. Bush (CVN-77) and it performed take-off, landing, air-refueling duties. To optimize the on board capability the X-47B is equipped with folding wings in order to minimize the space on the over crowded flight decks of the aircraft carriers. It is equipped with a Pratt & Whitney turbofan engine that guarantees subsonic performance and in its two loading bays it can provide an offensive load of over 2,000 kg.
Maquettes avions militaires
Cockpit du F-16 au 1:12
510002990disponible dans le commerce
Le F-16 Fighting Falcon, produit par la société américaine General Dynamics à partir de la fin des années 70, est une véritable icône de l’aviation militaire. Au début, développé pour répondre aux besoins de l’U.S. Air Force d’avoir un avion de chasse monoplace diurne de supériorité aérienne, le projet a progressivement évolué et un avion de combat multi-rôle tous-temps a été créé, caractérisé par une flexibilité opérationnelle extraordinaire. Le F-16 se caractérise par un design original, facilement reconnaissable par le « canopy » (verrière) à bulle. qui garantit une grande visibilité au pilote. De plus, le F-16 adopta des solutions innovantes telles que la cloche latérale, le « fly-by-wire » et de modernes systèmes avioniques pour le vol et le combat. Le kit permet de reconstruire le "Cockpit" du célèbre "Falcon" avec les solutions innovantes adoptées lors de son introduction dans les détachements de vol américains et de nombreuses autres forces aéronautiques militaires de l'OTAN.
