Italeri model kits

Military aircraft models 1:48

1:48 Junkers JU-87B Stuka Bat.o.Brit.

€39.99

Article number: 510002807 Product: 1:48 Junkers JU-87B Stuka Bat.o.Brit. Model Dim.: 22,9 cm "Battle of Britain 80th Anniversary" Super Decals Sheet The Junkers Ju 87 Stuka was a two-seat dive-bomber/ground-attack aircraft. It first flew in 1935 and made its combat debut in 1936 as part of the Condor Legion during the Spanish Civil War. The aircraft was easily recognizable by its inverted gull wings and fixed landing gear. The Stuka's design included several innovative features including automatic pull-up dive brakes set under both wings to ensure that the plane recovered from its attack dive, even if the pilot blacked out from the acceleration. It soon became the iconic aircraft of the German ‘Blitzkrieg’ during the first stages of the Second World War, where it provided close air support to the Wehrmacht Panzer Divisions. It was also used by the Luftwaffe during the Battle of Britain, where it’s weaknesses became apparent in comparison to the faster and better armed, more modern fighters, such as the Hurricane and Spitfire. Detailed plastic kit

Historical figures / battle sets

1:72 Roman Infantry Ist-IInd cent.

€10.99

Article number: 510006021 Product: 1:72 Roman Infantry Ist-IInd cent. The legion was the basic unit of the Roman army. Each maniple was commanded by a centurion, that could be recognized by his leg guards, the vine-stick and the helmet with a transverse crest. The Legion's equipment after the Marian reform was standardized and issued by the State. Legionnaires of this period wore a lorica hamata, reinforced on the shoulders, and were equipped with semi-rectangular shields. Two throwing pila, the gladius and the pugio (a short dagger) completed their equipment. Content 1 horseman and 34 figures.

Model trucks 1:24

1:24 Australian Truck

€61.99

Article number: 510000719 Product: 1:24 Australian Truck Mod.Dim.: 33,2 cm Australian outback truckers covering enormous distances on rugged and unsealed roads needs to equip their rigs with special modifications. They include a huge bull-bar (roo-bar), a sheet of wire mesh for windscreen protection, special dust filters, additional long range fuel tanks, heavy duty wheels, airconditioning and an array of different driving lights. Bulk goods are normally transported in Road Trains, which can have up to 3 trailers with a total length of over 31 metres.

Military model vehicles 1:24 1:48

1:24 Jeep Willys MB 80th Anniversary

€37.99

Article number: 510003635 Product: 1:24 Willys Jeep MB "80th Anniversary" In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multipurpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II. Even after 80 years, the "Willys" is still considered today, to be the four-wheeled vehicle which is most symbolic of the American army during the Second World War, and thanks to its enthusiasts and collectors, there are many examples of the jeep, still in perfect working order. Detailed plastic kit

Model vehicles 1:24

1:24 Lamborghini Countach 25th Anniv.

€34.99

Article number: 510103684 Product: 1:24 Lamborghini Countach 25th Anniv. Model Dim.: 18,0 cm Final version of the glorious Countach, dedicated to the 25th anniversary of Lamborghini, boasts numerous improvements, were in fact changed about 3,000 of the 8,000 pieces that make up the car. Much of the aesthetic innovations derived from the prototype Countach Evoluzione in 1986, the first supercar in the world made of carbon fiber. The air box and the air intakes were redesigned and enlarged and were mounted of miniskirts , the geometry of the suspension was modified. The improved aerodynamics allowed a maximum speed of 300 km / h. This was the last version made the Countach, which remained in production until 1990 when it was replaced by the Diablo. Detailed plastic kit

Model vehicles 1:24

1:24 Lancia HF Integrale

€36.99

Article number: 510003658 Product: 1:24 Lancia HF Integrale Model Dim.: 16,0 cm COLOR INSTRUCTION SHEET The Lancia Delta HF four wheels-drive is considered an Icon of the Rally Competitions History. The Delta HF was produced in the second half of the 80s and participated in the World Rally Championship from 1987 to 1988 winning two world titles and achieving important results in a lot of competition as the Rallye de Monte-Carlo and the Rallye San Remo. The Lancia Delta Integrale was the evolution of the Delta HF. It was introduced in 1988 and dominated the World Rally Championship winning several constructors’ championship and an impressive number of competitions up to 1993. Updated in many aesthetic details that made it more muscular and aggressive, as the enlarged fenders and the new designed air intake on the engine bonnet, the Lancia HF Integrale was also improved in driving and engine performance. The 1995 cm3 turbocharged engine increased its power up to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and early 90s, bringing many famous pilots as Miki Biasion or Juha Kankkunen to victory. Detailed Plastic Kit of model Lancia HF Integrale in scale 1:24

Trailer model kits & Accessories

1:24 Truck Accessories II

€32.99

Military figures & accessories 1:35

1:35 Brit. Crusader Mk.III w/ Tank crew

€36.99

Article number: 510006592 Product: 1:35 Brit. Crusader Mk.III m. Besatzung Designed at the beginning of the Second World War, the Crusader was one of the most important British "Cruiser" tanks reaching a production of over 5,000 units. Equipped with Christie suspension with large diameter rolling wheels, the Crusader possessed remarkable driving skills on rough terrain. The first versions of Mk. I and Mk. II were armed with a 2 pdr cannon. later replaced by the more powerful 6 pdr cannon. in the Mk.III version. Lacking adequate armor against enemy fire, it was also very vulnerable to enemy mines and anti-tank guns, and its armament was often inadequate in front of similar German vehicles. However, when used in a coordinated way, they managed to achieve good results. Detailed plastic kit

Military figures & accessories 1:35

1:35 Observation Post

€9.49

Military model vehicles 1:35

1:35 Sd.Kfz. 305/22 Funkwagen

€29.99

Article number: 510006575 Product: 1:35 Sd.Kfz. 305/22 Funkwagen Model Dim.: 17,1 cm COLOR INSTRUCTION SHEET - RUBBER TYRES The Opel Blitz was the main truck used by German forces during the Second World War. It was deployed extensively on all fronts in huge numbers, and was consequently considered to be the "working mule" of the Wehrmacht. Thanks to the sturdy frame, the robust system of rigid axles with leaf springs and the twin-wheels on the back, the Opel Blitz was able to carry a payload of over 3 tons. The 3,600 cc. engine was easy to maintain and provided 75 hp. The most popular version was the 4x2 with rear wheel drive. However, there was also a 4x4 version that operated both in Russia and the North African desert. Thanks to its flexibility and its wide rear cargo area, the Opel Blitz was also deployed in additional roles including as a mobile command post equipped with radio communications for battlefield management of ground troops. Detailed plastic kit in scale 1:35

Military model vehicles 1:35

1:35 Sherman M4A1

€28.99

Article number: 510000225 Product: 1:35 Sherman M4A1 Model Dim.: 16,5 cm "V-DAY" Special Edition NEW DECAL VERSIONS: FRANCE & SOUTH AFRICA (in addition to the existing US version) In 1941, after the German attack on Russia, it became clear to the UNITED STATES that possibility of an American involvement in the war was becoming more and more inevitable. For this reason, President Roosevelt ordered substantial production increases of the medium tank M4. The tank was not a completely new model, since it derived from the previous model M3 "Grant". The Sherman had some major improvements on the superstructure and on the armament as well as on the welded or cast hull. The "General Sherman", under which name the new tank was soon to be known, was equipped with a 75 mm gun, which was, however, insufficient against the German Tanks. This necessitated a series of changes, including a completely new turret as well as a 76 mm gun, which would be more efficient than the previous one. The new prototype was given the designation M4 A1. In January 1944, the new type was introduced. Until the end of the war, about 3400 pieces were produced. Notwithstanding the improvements, there were still many defects, one of them being the lack of protection. Frequently the crew was forced to protect the tank sides and the front with sandbags. In some instances the most exposed track sections were covered and sometimes even cement or steel blocks were attached. Tanks to its numerical superiority, the tank was able to match the German tanks, using its great maneouverability and its excellent 76 mm gun. M4 A1 took part in the invasion of Normandy and in all European theatres. Detaillierter Plastikmodellbausatz des Modells Sherman M4A1 im Maßstab 1:35 VE-DAY SPECIAL EDITION NEW DECAL VERSIONS: FRANCE & SOUTH AFRICA (in addition to the existing US version)

Military figures & accessories 1:35

1:35 Telegraph Poles

€9.49

Military model vehicles 1:35

1:35 WWII US Off-Road Support Vehicle

€15.99

Article number: 510000314 Product: 1/35 WWII US Off-Road Support Vehicle Model Dim.: 14 cm Decals for one version. In 1940, after World War II had broken out, the US general staff ordered various factories to design a light multi-purpose vehicle with all-wheel drive. The American Bantam Company, Willys Overland, and Ford Motor Co. competed with each other. Willys prototype was chosen, which, after an initial run of 1500 vehicles, went into mass production at the beginning of 1941 and reached a total output of 640.000 units out of which 277.000 pieces were produced by Ford under a licensing agreement. This shows that the Jeep was the most widely produced light vehicle of the war industry during World War II.

Military aircraft models 1:48

1:48 F-86E Sabre

€31.99

Article number: 510002799 Product: 1:48 F-86E Sabre Model Dim.: 23,8 cm SUPER DECALS FOR 4 VERSIONS - COLOR INSTRUCTIONS SHEET The single-engine jet fighter F-86 Sabre was developed by the American aircraft company North American Aviation in the late 1940s and became a key aircraft in terms of post-war military aviation. The F-86 adopted a swept-wing design, incorporated a large front air intake and used the General-Electric J47 jet engine. It was widely used by the U.S.A.F. and played a key role during the Korean War where it could effectively ounter the Soviet fighter Mikoyan-Gurevich Mig-15, in the first jet dogfights in history. Detailed plastic kit in scale 1:48

Special series

1:56 Cromwell MK. IV

€21.99

Article number: 510025754 Product: 1:56 Cromwell MK. IV The Cromwell tank was developed during the Second World War by the British Army to replace the outdated Crusader in the role of "Cruiser Tank." The Cromwell was characterized by its very high speed, which could reach over 60 km/h, and great manoeuvrability. While speed was often limited to prevent excessive wear on the tank's mechanics, especially its suspension, it was balanced with decent armor and good armament. The main 75mm gun mounted in the turret was powerful enough in engagements against similar armored vehicles and could use the same ammunition as other Allied tanks like the American Sherman. Additionally, the Cromwell effectively served in the close support role for infantry. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Historical figures / battle sets

1:72 French Line Infantry (1815)

€10.99

Article number: 510006002 Product: 1:72 French Line Infantry (1815) The line infantry was the backbone of Napoleon's Grande Armée. The "shako" headgear adopted in 1806, replacing bicorn hats, and the Charleville 1777 musket, are the most characteristic elements of French line infantry. The equipment was completed by the briquet, a sort of infantry shortsword. The kit also includes the regiment's drummer and the "eagle-bearer" carrying the regiment's insignia.

Military figures & accessories 1:72

1:72 German Infantry

€10.99

Article number: 510006033 Product: 1:72 German Infantry Wehrmacht was the name used by the German army during the war on all European and North African fronts for almost 6 years, from 1939 to 1945. On September 1st, 1939, two Wehrmacht army groups invaded Poland, thus starting World War II. The models in this kit represent Wehrmacht infantry units with the typical feldgrau-colored uniforms and with individual equipment composed of a Mauser K-98 rifle and a MP40 submachinegun. Contains 50 figures.

Military figures & accessories 1:72

1:72 IT Modern US Soldiers

€10.99

Article number: 510006168 Product: 1/72 Modern US Soldiers Little great men Men in their uniformst hat made the history oft he 20th century. From North Africa, to Russia, Normandy, the Pacific Ocean, the variety of the characters presented allows us to recreate the most renowned conflicts of the Second World War. Unusual and dynamic poses make them an ideal complement for wargames and dioramas. Contains: 50 unpainted figures

Historical figures / battle sets

1:72 Roman Infantry 1st Century

€10.99

Article number: 510006047 Product: 1/72 Roman Infantry 1st Century The equipment of the 1st Century B.C. legionnaire became the stereotype of Roman infantry. Over his tunic he wore the heavy lorica segmentata, the most advanced form of body armor at the time. The characteristic rectangular "scutum" often bears the name or the insignia of the Legion the soldier belongs to. The individual armament comprised gladius and pilum, a heavy throwing javelin. The kit also includes centurions with transverse crest helmets, and the signifer (standard bearers) carrying the Legion's insignia. Content 35 figures.

Military model vehicles 1:72

1:72 Sd.Kfz 265 Kleine Panzerbefehlswag.

€13.49

Article number: 510007072 Product: 1:72 Sd.Kfz 265 Kleiner Panzerbefehlswagen Model Dim.: 5,6 cm The Sd.Kfz 265 Kleine Panzerbefehlswagen armored command vehicle was born to meet the need of the Wehrmacht Panzer Division Commanders to follow, as close as possible, the tanks and better coordinate them on the battlefield. The armored command vehicle was designed on the Panzer I Ausf. B light tank chassis. To increase the space for the unit commander and his staff, the traditional rotating turret with the main armament was removed and a tall fixed superstructure was installed. The commander’s room was able to host the battle maps, the transmission and the communication systems. An additional radio antenna could be used, on the hull, to increase the range of radio communication. Produced from the second half of ‘30s the "Panzerbefehlswagen" has been used in combat operations in September 1939 during the Poland invasion. Detailed Plastic Kit of model Sd.Kfz 265 Kleine Panzerbefehlswagen in scale 1:72

Historical figures / battle sets

1:72 Templar Knights - Medieval Era

€11.99

Article number: 510006125 Product: 1:72 Templar Knights - Medieval Era The birth of the Knights Templar, a monastic and military order, dates back to 1139 as an attempt to protect the pilgrims visiting the Holy Land after its conquest. The knights were characterized by a Cistercian's white robe with a red cross. Most templars were equipped as heavy cavalry and can be considered a kind of elite troop of their times.

Historical figures / battle sets

1:72 Teutonic Knights XIIth-XIIIth cent.

€10.99

Article number: 510006019 Product: 1:72 Teutonic Knights XIIth-XIIIth cent. This military and monastic order appeared in the Holy Land at the times of the third crusade but it focused its activity in the colonization of Eastern Prussia, Poland and Baltic countries, bringing Catholicism in the East. In 1199 Pope Innocent 3rd gave them the white surcoats with a black cross that became the insignia of the order. In 1242, the knights of the Order were defeated in the battle of Lake Peipus by Alexander Nevsky, prince of Novgorod. Content 17 riders

Historical figures / battle sets

1:72 The Knights XIth Century Crusaders

€10.99

Article number: 510006009 Product: 1/72 The Knights XIth Century Crusaders The first Crusade took place at the end of 11th Century and culminated with the siege and conquest of Jerusalem in 1099 by Godfrey of Bouillon, that led to the birth of the Outremer crusader states. The kit represents the diversity of troops that took part in the war. The knights, heavy cavalry wearing chain mail armor and carrying the large almond-shaped shields typical of the age, fought alongside infantry and crossbowmen recruited in various Christian European countries. Content 9 horsemen and 25 figures.

Military aircraft models 1:72 / 1:48

1:72 UH-1D Slick

€15.99

Article number: 510101247 Product: 1:72 UH-1D Slick Model Dim.: 14 cm This robust helicopter was first introduced during the mid-fifties and may be the best known rotor-blade aircraft world-wide. Reliability is its greatest feature. It was designed for the U.S. Army during the Vietnam war. Thousands of UH-1s are in service as transport, ambulance and attack aircraft. Licensed production in Italy, Germany and Japan make it part of the armed and police forces of more than fifty nations. Presently twin-engine versions are being produced.

H0 models

1:87 Locomotive BR41

€19.99

Article number: 510008701 Product: 1:87 Locomotive BR41 Model Dim.: 27,5 cm From 1936, within the building programme for the German National Raiways (DRG), the BR 41 class of "standard" locomotives was developed for fast good trains. During the trial period the BR 41 received the nickname "Ox loco" because it was used for hauling fast cattle trains. Subsequntly, a total of 366 of the BR 41 locomotives were built, split among almost all the German locomotive builders. The BR 41 was designed as a so-called multi-purpose locomotive. In addition to its proper application – hauling express goods trains – its maximum speed of 90km/h enabled it to be used for fast and even express passenger trains. HO/1:87 Scale

Brushes

00 Brush Synthetic Flat - SINGLE PACK

€1.59

Brushes

000 Brush Synthetic Flat - SINGLE PACK

€1.49

Brushes

1 Brush Synthetic Round - SINGLE PACK

€1.79

Model vehicles 1:12

1:12 Alfa Romeo 8C 2300 Monza Nuvolari

€170.00

Article number: 510004706 Product: 1:12 Alfa Romeo 8C 2300 Monza Nuvolari Model Dim.: 32,0 cm 100% NEW MOULDS - Colors Instructions Sheet - Steering wheels - Realistic suspension - Highly detailed engine - Rubber tires - 300 plastic parts - 30 Chromed parts - Photoetched parts - Opening cowling - Screws, tubes, rope and nylon net

Model vehicles 1:12

1:12 Alfa Romeo 8C/2300 1931-33

€170.00

Article number: 510104708 Product: 1:12 Alfa Romeo 8C/2300 1931-33 Model Dim.: 32,0 cm Colors Instructions Sheet - Steering wheels - Realistic suspension - Highly detailed engine - Rubber tires - 320 plastic parts - 30 Chromed parts - Photoetched parts - Opening cowling - Screws, tubes and nylon net The Alfa Romeo 8C can be considered as one of the most famous sports cars of the 1930s. The car's name derives from the engine adopted: an 8-cylinder in-line supercharged engine with a displacement of 2,336 cc. The Alfa Romeo could be considered the "state of art" for technology, innovative solutions and performances. Characterized by an impressive reliability and driveability the "8C" achieved significant victories in international car racing competitions. It linked its name to the famous Italian driver Tazio Nuvolari that won, among the others, the Targa Florio race in Sicily and the prestigious Italian Grand Prix at Monza. This last victory gave the "Monza" name to the twin seater GP car. From the racing version, a production batch of almost 200 vehicles was produced for the private markets and to be used on the normal road.To celebrate the 110th anniversary of the famous Italian manufacturer we are releasing the two-seater Sport version of the 1930’s. The car was distributed at that time via the Alfa Romeo sales network to those customers wealthy enough to purchase the most successful sports car of the period. Detailed plastic kit in scale 1:72

Model vehicles 1:12

1:12 Bugatti 35B Roadster

€170.00

Article number: 510004713 Product: 1:12 Bugatti 35B Roadster The Bugatti Type 35 is one of the most iconic and revered racing cars in motor racing history, both technically and competitively. Ettore Bugatti's masterpiece was a unique mix of engineering skill, design, elegance, speed and its relatively light weight. Produced during the 1920s, it won an incredible number of races in both "road" and "on track" competitions. The Bugatti was in fact specifically designed for the world of racing, which included the introduction of technical and mechanical solutions for the car that made it ideal for the racing circuits of the period. Aesthetically, it was universally known and recognisable by the unmistakable shape of the horseshoe-shaped radiator which was a key design feature of Bugatti as a car manufacturer. Due to its 2,263 cm3 8-cylinder engine with a four-speed mechanical gearbox and equipped with a volumetric compressor, the Bugatti Type35B was able to attain a top speed of 210 km / h. In particular, the Bugatti 35C, due to its perfect balance between performance and handling, can be considered among the best "Type35" ever made. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Model vehicles 1:12

1:12 Bugatti Type 35B

€170.00

Article number: 510004710 Product: 1:12 Bugatti Type 35B The Bugatti Type 35 is one of the most iconic and revered racing cars in motor racing history, both technically and competitively. Ettore Bugatti's masterpiece was a unique mix of engineering skill, design, elegance, speed and its relatively light weight. Produced during the 1920s, it won an incredible number of races in both "road" and "on track" competitions. The Bugatti was in fact specifically designed for the world of racing, which included the introduction of technical and mechanical solutions for the car that made it ideal for the racing circuits of the period. Aesthetically, it was universally known and recognisable by the unmistakable shape of the horseshoe-shaped radiator which was a key design feature of Bugatti as a car manufacturer. Due to its 2,263 cm3 8-cylinder engine with a four-speed mechanical gearbox and equipped with a volumetric compressor, the Bugatti Type35B was able to attain a top speed of 210 km / h. It was produced in limited numbers until 1930. Detailed plastic kit

Model vehicles 1:12

1:12 F-104G Cockpit

€34.99

Article number: 510002991 Product: 1:12 F-104G Cockpit Model Dim.: 14,7cm/9,0 cm 124 parts - Fully detailed real F-104 cockpit controls - Fully detailed Martin Baker Mk.I Q ejection seat - Complete cockpit dials decals - Adhesive acetate silk seat belts - Pilot’s helmet and oxygen mask - Pilot’s visor, gunsight and radar scope clear parts The Lockheed F-104 Starfighter is one of the most renowned fighters in aviation history and also the one with the longest operational service. Its history began at the end of the ‘50s and ended with some air forces in the mid-2000s. Its unique airframe, with slender fuselage and very little wing surface, made this aircraft ideal in an interceptor role. Due to the thrust of its General Electric J79-GE-11A afterburning turbojet engine it could exceed Mach 2,2 with a first class rate of climb. This scale model kit allows modelers to recreate the famous "Starfighter" cockpit with the typical internal layout of the ‘50s and ‘60s fighters, which was ‘home’ to many former NATO pilots. The fine detail of the instrument panel typical of the period, is matched by the highly accurate reproduction of the Martin-Baker ejection seat. Detailed plastic kit in scale 1:12

Model vehicles 1:12

1:12 Fiat 500 Upgraded Edition

€125.00

Article number: 510004715 Product: 1:12 Fiat 500 F Upgraded Edition The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. Furthermore the new car should be easy to drive, even in the city traffic, and provide very low running costs. The "Fiat 500" was released on the market in July 1957 and it was immediately a success. In 1965 was introduced the 500F, the version with the largest number of units produced. Easily recognizable for the front-hinged doors, in line with the new laws, the Fiat 500F adopted several technical and aesthetic improved solutions as the new frame and the wider windscreen. The Fiat 500F is, still today, the most "classic" version of the whole 500 production and it remains in the heart of a huge number of car fans.   Warning! Not suitable for children under 14 years.

Model vehicles 1:12

1:12 Fiat 500F (1968 version)

Article number: 510004703 Product: 1:12 Fiat 500F (1968 version) Model Dim.: 25 cm 100% new moulds - Highly detailed model - Opened or closed top - Opening car doors - Front and rear opening bonnets - Steering wheels - Working suspensions - Rubber tires - Photoetched and chromed parts The model can be realized in the Anglo-Saxon version with right drive. The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. Furthermore the new car should be easy to drive, even in the city traffic, and provide very low running costs. The "Fiat 500" was released on the market in July 1957 and it was immediately a success. In 1965 was introduced the 500F, the version with the largest number of units produced. Easily recognizable for the front-hinged doors, in line with the new laws, the Fiat 500F adopted several technical and aesthetic improved solutions as the new frame and the wider windscreen. The Fiat 500F is, still today, the most "classic" version of the whole 500 production and it remains in the heart of a huge number of car fans. Detailed plastic kit of model Fiat 500F (1968 version) In scale 1:12

Model vehicles 1:12

1:12 FIAT 806 Grand Prix

€170.00

The model "Fiat 806 Grand Prix" in scale 1/12 has a length of about 303 mm. UPGRADE PROTAR MOULDS The Fiat 806 Grand Prix adopted significant innovations for its time. In fact, the Fiat 806 was the "progenitor" of the modern Formula One racing cars. Developed and produced by FIAT, the Italian automobiles manufacturer, in 1927, it could be considered the first Grand Prix car ever built before. Thanks to its 180 HP 12 cylinders engine, the Fiat 806 was able to reach and even exceed the speed of 240 Km/h. However, the most important innovations were made in the development of the chassis, mechanics and bodywork. In fact, the engine and gearbox unit was located between the two chassis bars in order to optimize the performance and the drivability. The Italeri model is unique and very detailed (over 400 pieces to be assembled). The bonnet can be open to view the highly detailed engine. It has working steering, soft rubber tires, photo etched parts and little metallic accessories (screws, nuts, springs, etc).

Model vehicles 1:12

1:12 FIAT Abarth 695 SS/ Assetto Corsa

€135.00

Article number: 510004705 Product: 1:12 FIAT Abarth 695 SS/ Assetto Corsa Model Dim.: 25,0 cm New moulds - Highly detailed model - Openable hood and trunk - Open or closed top - Opening car doors - Steerable wheels - Working suspension - Rubber tires - Photoetched and chromed parts One Model in two versions: - Fiat Abarth 695SS - Fiat Abarth 695SS Assetto Corse The "Nuova 500" was produced by Fiat from 1957 to 1975. It is a real icon on four wheels and one of the symbols of "made in Italy". Its unique and recognizable design is famous all over the World. When the small car was set up by the Italian car manufacturer, its goal was simple: to introduce on the market at a very affordable price a new compact car able to enlarge the number of potential customers. In addition to the classic Fiat 500, that obtained an impressive commercial success all over the World, the Italian car manufacturer Abarth produced several special versions characterized by unmistakable sporting and racing attitude. In 1964 Abarth, originally founded as racing team, presented two interesting versions developed on the Fiat Nuova 500 chassis and body : the 695 and the 695 SS. Both versions were equipped with a 689 cm3 engine and were able to reach the max speed of 140 Km/h. In 1965 Abarth developed the Fiat 695 SS Assetto Corsa with improved performances and feature Detailed plastic kit of model FIAT Abarth 695 SS/ Assetto Corsa In scale 1:12

Model vehicles 1:12

1:12 FIAT Mefistofele 21706c.c. 1923-25

€190.00

Article number: 510104701 Product: 1:12 FIAT Mefistofele 21706c.c. 1923-25 Model Dim.: 45 cm Upgrade Protar Moulds Fiat Mefistofele, the Queen of World Land Speed The one-off racing car "Eldridge", derived from the old Fiat SB4 chassis, became known as Mephistofele for the infernal noise emitted by its powerful aircraft 6-cylinders in-line engine, giving a capacity over 20,000 cm3, not attenuated by exhaust mufflers kept "free" to provide the most significant performance. On 12th July 1924 in Arpajon, the Mefistofele, was able to reach, driven by its pilot and designer Ernest Eldrige, the amazing speed, for the time, of 146,01 miles per hour (over 230 Km/h) and broke the World Land Speed Record achieving an impressive result. The Mefistofele, was characterized by the high back bodywork able to contain the powerful Fiat A-12 liquid-cooled engine and for its structure especially made to achieve the speed record.

Model vehicles 1:12

1:12 Lancia DELTA 16VHF integ Sanremo'89

€190.00

Article number: 510004712 Product: 1:12 Lancia DELTA 16VHF integ Sanremo'89 The sporty version of the Lancia Delta road model - the "HF" 4WD - is an icon of rally cars. The Delta HF was produced in the second half of the 1980s and took part in the World Rally Championship from 1987 to 1988, won two world championship titles and took first place in numerous races such as the prestigious Monte Carlo Rally and that of San Remo. Its development, the Lancia Delta Integrale, took part in races until 1993, won another 5 world championship titles and consolidated the "Palmares" in the Italian company's off-road competitions. in many aesthetic details that made it more muscular, such as the enlarged fenders and new air inlets on the bonnet, the technology and engine of the HF Integrale have also been improved. The performance of the 1995 cc turbo engine, for example, has been increased to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and the early 90s and brought many famous drivers such as Miki Biasion, Didier Auriol or Juha Kankkunen to victory. Detailed Plastic Kit

Model vehicles 1:12

1:12 Lancia Delta HF Integrale 16V

€210.00

Article number: 510104709 Product: 1:12 Lancia Delta HF Integrale 16v The sporty version of the Lancia Delta road model - the "HF" 4WD - is an icon of rally cars. The Delta HF was produced in the second half of the 1980s and took part in the World Rally Championship from 1987 to 1988, won two world championship titles and took first place in numerous races such as the prestigious Monte Carlo Rally and that of San Remo. Its development, the Lancia Delta Integrale, took part in races until 1993, won another 5 world championship titles and consolidated the "Palmares" in the Italian company's off-road competitions. in many aesthetic details that made it more muscular, such as the enlarged fenders and new air inlets on the bonnet, the technology and engine of the HF Integrale have also been improved. The performance of the 1995 cc turbo engine, for example, has been increased to 185 hp. The Lancia Delta Integrale dominated the World Rally Championship between the 80s and the early 90s and brought many famous drivers such as Miki Biasion, Didier Auriol or Juha Kankkunen to victory. Detailed plastic kit in scale 1:72

Model vehicles 1:12

1:12 Mc Laren MP4/2C Prost / Rosberg

€135.00

Article number: 510104711 Product: 1:12 Mc Laren MP4/2C Prost / Rosberg The McLaren MP4/2 was one of the most successful racing cars, securing the most victories in the history of Formula 1. In 1985, the MP4/2B made its debut equipped with a TAG Porsche engine, enhanced by two superchargers capable of attaining 850 hp and displaying aerodynamic designs less showy than the previous cars, and which were also compliant with the evolving new regulations of the period. The project’s engineering and design achievements were ratified by victory in the constructors’ and drivers’ world championships, due in equal measure to the extraordinary talent of driver Alain Prost. In 1986, the project was further enhanced by the MP4/2C version and Alain Prost was again confirmed as world champion. During this new season he was joined by another great Formula 1 talent, the Finn Keke Rosberg. The McLaren MP4/2 has a special place in the hearts and minds of Formula 1 enthusiasts and fans, winning three drivers' championships and two constructors' championships. Detailed plastic kit

Trailer model kits & Accessories

1:24 20' Container Trailer

€55.99

Article number: 510003887 Product: 1:24 20' Container Trailer Length of the model 300 mm 100% NEW TRAILER MOULDS Designed to optimize the logistics of road transport, our trailer for 20" containers or swap bodies is inspired by the FCT model (fixed container transportation) produced by Tecnokar, leader company in high-Quality semi-trailer production and distribution since 1986. With its carefully built structure which offers the right balance between stability, sturdiness and durability, the fixed container transportation chassis is a steel Hbeam chassis with a 2′ fifth wheel coupling kingpin, Jost double-speed retractile oscillating rails and Twist arms with zinc-coated twists. It is also provided with the basic ADR standard equipment. Detailed Plastic Kit of model 20' Container Trailer in scale 1:24

Model vehicles 1:24

1:24 Alfa Romeo Guilia 1600 Spider

€37.99

Article number: 510003668 Product: 1:24 Alfa Romeo Guilia 1600 Spider Built by Alfa Romeo, the Giulia Spider was produced from 1962 to 1965 and can be considered the evolution of the Giulietta Spider, from which it takes the main aesthetic lines of the highly successful design. The Giulia was equipped with a longitudinally-mounted inline four-cylinder engine with a displacement of 1,570 cc, more powerful than the previous 1,300 cc engine used in the Giulietta. The adoption of the new engine required modifications to the front hood, which also became a distinctive and characterizing element. Aesthetic improvements were also made to the interior, steering wheel, and instrumentation. The transmission was based on a synchronized five-speed gearbox. It was produced in two versions: the "normale" with 92 HP and the "veloce" with twin carburetors providing 112 HP. It achieved good commercial success and was particularly appreciated for its unmistakable "made in Italy" design. Detailed plastic kit   Warning! Not suitable for children under 14 years.

Trailer model kits & Accessories

1:24 Cargo Trailer

€61.99

Article number: 510003885 Product: 1:24 Cargo Trailer Model Dim.: 58,0 cm SUPER DECALS SHEET FOR 2 VERSIONS This latest-generation semitrailer is representative of much of Europe’s on-road haulage vehicles. Featuring an efficient braking system, side impact protection, a considerable load capacity, these trailers are used extensively and are produced by at least ten or so specialised companies, which provide a comprehensive range of variants to meet the specific needs of individual customers.

Trailer model kits & Accessories

1:24 Container Auflieger 40Ft

€58.99

Article number: 510003951 Product: 1:24 Container Auflieger 40Ft Model Dim.: 50,5 cm SUPER DECALS SHEET - COLOR INSTRUCTIONS SHEET The freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container in terms of size, volumes and loading capacity makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has become more effective and faster. Even the warehouses and stocking areas management became easier and more flexible. Detailed plastic kit in scale 1:24   Warning! Not suitable for children under 14 years.

Model trucks 1:24

1:24 DAF 95 Master Truck Tractor Tr.

€59.99

Article number: 510000788 Product: 1:24 DAF 95 Master Truck ZgM The 'Concept 95/380' has been, for some time, the flagship product in the renowned DAF manufacturer's lineup, representing a further development of the Space Cab series. It was recognized by the market as a significant evolution compared to its predecessors. Indeed, numerous technical and aesthetic improvements were developed and adopted, greatly appreciated by users of road industrial vehicles, especially for long-haul journeys. The soundproof cabin and advanced shock absorbers for the time provided top-of-the-market onboard comfort, and the powerful 6-cylinder ATI (Advanced Turbo Intercooling) engine ensured good performance with a particular focus on operating costs.   Warning! Not suitable for children under 14 years.

Model trucks 1:24

1:24 DAF XF105

€74.99

Article number: 510003917 Product: 1/24 DAF XF105 Model Dim.: 24,5 cm SUPER DECALS SHEET - ADHESIVE STENCIL - NEW CHROMED WHEELS - NEW TYRES This road haulage tractor by DAF is a restyled version of the successful previous series. Offering excellent reliability and a good standard of comfort on long-haul routes, the XF105 also features very good mechanical reliability and outstanding tengine performance under a wide range of conditions, in full compliance with the strictest environmental standards. Also, in the event of an accident, the cab provides the driver with an extremely high level of protection. The name "Smoky" comes from the race horse owned by the driver father (from here "Junior") which, used to winning, during the race was disappearing like a puff of smoke in front of his opponents. In a Wild West atmosphere, the horses are the protagonists in the airbrushed sides of his DAF XF 105 too.

Trailer model kits & Accessories

1:24 Dumper Trailer

€57.99

Article number: 510003845 Product: 1:24 Dumper Trailer Mod.Dim.: 37,0 cm This great three axis trailer has been developed for earth and building debris transportation within construction sights. Equipped with high resistant steel chasse, it is capable to support stress on unpaved working areas. Characterized by a large tipping bucket capable of several tons payload. This trailer has installed with an efficient braking system enabling to guarantee maximum safety during transportation. It is further has a bucket covering system to eliminate loss of material risks while moving.

Trailer model kits & Accessories

1:24 European Tractors TYRES and RIMS

€26.49

Article number: 510003909 Product: 1:24 European Tractors TYRES and RIMS 100% NEW MOULDS - DECALS SHEET INCLUDED Accessories suitable for European tractors only. THE BOX CONTAINS 7 TYRES + 7 RIMS : 2 front rims and tyres size 385/65 R22.5 - 5 rear rims and tyres size 315/80 R22.5 Deatailed plastic kit of European Tractors TYRES and RIMS in scale 1:24

Model vehicles 1:24

1:24 Fiat 131 Abarth Rally OLIO FIAT

€39.99

Article number: 510003667 Product: 1:24 Fiat 131 Abarth Rally OLIO FIAT The Fiat 131 Abarth evolved from the initial two-door sedan model. The Abarth development involved many interventions such as the adoption of a lighter chassis, larger wheel mudguards, air intakes on the bonnet and on the sides to optimize the mechanical cooling system. The Fiat 131 Abarth used an in-line front longitudinal 4-cylinder engine with a light alloy head and 4 valves per cylinder. Initial manufacturing began in 1976 leading to participation in the World Rally Championship where it won three constructors' championships, a FIA Drivers' Cup and a drivers' championship. It took part in international competitions until 1982 when it was replaced by Lancia brand cars. Some of its body liveries, associated with the sponsors of the period, have become iconic in the history of "off road" motor racing competitions. Detailed plastic kit in scale 1:32

Model vehicles 1:24

1:24 Ford Escort Mk.II

€36.99

Article number: 510103655 Product: 1:24 Ford Escort Mk.II Model Dim.: 16,7 cm The Ford Escort Mk 2 was launched in 1975. It was a significant evolution compared to the Escort Mk 1 that debuted at Brussels Motor Show in January 1968. It used the reliable mechanical components as the Mk 1 but adopted a new design based on a squared-style look able to be in line with the aesthetic and stylistic taste of the 70s. The product range was wide, declined in three Body styles (2 doors, 4 doors and 3 doors station wagon), five type of engines and a significant variety of settings and configurations. The Escort Mk 2 was mainly produced in the Ford Group German plants and achieved a good commercial success. In addition to the more classic version, it was also released the Escort Sport version characterized by a more aggressive look and distinctive Sport interiors. To compete, successfully, in World Rally Championship, a dedicated model, the RS 1800, was introduced to complete the line up. Detailed Plastic Kit of model Ford Escort Mk.II in scale 1:24

Model vehicles 1:24

1:24 Ford Escort Zakspeed Gr.2 D&W

€37.99

Article number: 510003664 Product: 1:24 Ford Escort Zakspeed Gr.2 D&W The Ford Escort Mk 2 was launched on the market in 1975. It was a decisive evolution compared to the Escort Mk 1 presented at the 1968 Brussels Motor Show. The previous version retained the high quality mechanics but was completely revised in the design that he interpreted the aesthetic and stylistic taste of the 70s. In addition to the more functional versions, there was also an Escort Sport version characterized by a more aggressive look and a markedly sporty interior. Finally, the RS 1800 version with 115 HP twin-shaft engine was also presented, which formed the basis for the special version used in the Rally world championship and which achieved significant results. The iconic Zakspeed Team built and used a dedicated version of the Escort Mk 2 between 1977 and 1978. Detailed plastic kit in scale 1:24

Model vehicles 1:24

1:24 Ford Transit Mk. II

€38.99

Article number: 510103687 Product: 1/24 Ford Transit Mk. II Model Dim.: 18,5 cm THIS MODEL IS A RIGHT & LEFT-HAND DRIVE Transit is a light commercial vehicles series produced since 1953 by Ford Germany and Ford UK and conceived for European market. The front engine of these vehicles allows to have a lower loading bed, which eases the loading process. Anyway the very first Transit was produced in 1965 by the German and British Ford together, expressly wanted by Henry Ford; this cooperation gave life to what is Ford Europe today and to the well-known vehicle MK I. In 1978 it was further reshaped and the MK II was born. In 1984 an esthetic restyling was made on the front bumper and to the engine, which was a 68 horsepower Diesel York of 2498 cbm. These vehicles have been a commercial success not only in Europe, as still today they are in production also for extra European markets. Detailed Plastic Kit of model Ford Transit Mk. II in scale 1:24

Model trucks 1:24

1:24 Freightliner FLC

€59.99

Article number: 510003859 Product: 1/24 Freightliner FLC Mod.Dim.: 32,5 cm This more than 50 year old US-truck manufacturing company has an excellent reputation for quality and beautiful design of their products. In 1981 Daimler-Benz AG, the parent company of Mercedes-Benz, one of the worlds biggest truck manufacturers, purchases the Freightliner Corporation. The company will continue all activities under the original Freightliner name. Daimler-Benz has also imported several models to Europe for demonstration purposes and truck shows. All Freightliner trucks have a common basic technical design, many are custom-built to the customers needs. The model is a Conventional FLC 12064T Tractor with a 475 HP Cummins-Diesel engine and a 13 speed Fuller-Roadranger Transmission.

Model trucks 1:24

1:24 Freightliner Heavy Dumper Truck

€67.99

The renowned US Portland based company "Freightliner Trucks", which operates in the industrial vehicle sector and is owned by the automotive giant Daimler, is mainly known for being one of the key manufacturers of trucks used for "on road" transportation roles. However, it is also important to recognise the versatility and success over time, of those Freightliners that were dedicated to "heavy duties" jobs. In fact, market demand for "quarry and construction" vehicles saw strong growth in the late 1970s and early 1980s, subsequently impacting the production volumes of the main truck and heavy vehicle manufacturers. Freightliner designers have worked on the most suitable technical solutions to meet the needs of the construction market, namely, reinforced chassis and rear axles for greater payload, tough and sturdy tipping rear decks, optimized engines and transmissions for demanding loads and steep slopes.

Model trucks 1:24

1:24 Iveco HI-WY E5 "Abarth"

€69.99

Article number: 510003934 Product: 1:24 Iveco HI-WY E5 "Abarth" Model Dim.: 25,4 cm SUPER DECALS SHEET FOR 2 VERSIONS - CHROMED ADHESIVE - CHROMED WHEEL RIMS - NEW TYRES - COLOR INSTRUCTION SHEET The Stralis Hi-Way is the latest evolution of the famous heavy duties truck produced by Iveco. The Stralis Hi-Way is characterized by several technological and aesthetic improvements compared to previous versions. The cabin offers a completely new design and is equipped with integrated electronic systems able to optimize the on-board comfort and to provide the highest safety standard. The evolution of the Stralis is also characterized by a completely new "powertrain" able to minimize the fuel consumption and the maintenance costs. The new engine strength is in fact to stay in line with the new Euro 5 anti-pollution regulation and to keep a very high operation effectiveness in terms of cost of ownership. In 2013 Iveco Stralis Hi-Way won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines. On 2017 Iveco announced that has supplied a Stralis Hi-Way, characterized by a dedicated livery, to Abarth Racing Team to support the logistic of the famous Italian sport brand. Detailed Plastic Kit of model Iveco HI-WY E5 "Abarth" in scale 1:24

Model trucks 1:24

1:24 IVECO Turbostar 190.48 Special

€59.99

Article number.: 510003926 Product: 1:24 IVECO Turbostar 190.48 Special The Iveco Turbostar was an important commercial success for Italian manufacturer. Thanks to its characteristics of strength, reliability and performance, it achieved a significant position on the European truck market and it was the most widespread industrial vehicle in Italy in the late 80s.It was declined in numerous versions and adopted several outfitting to satisfy the specific transportation needs of the users. The version with the canvas deck was one of the most common version able to guarantee a great flexibility of transport of all types of goods. Another great advantage of the Iveco 190.42 was the loading capacity compared to the overall dimension. The payload / size ratio provided by 190.42 was an important factor to perform transportation duties outside of the motorways and even in the smaller urban area. Often an hydraulic rear platform to make easier the loading and unloading activities was added to the canvas version. The Turbostar enjoyed considerable commercial success thanks to the two-axle "road tractor" version, a feature which became a reference point for road transport in the 1980s. The wide range of engines available also ensured that the vehicle performed it’s industry tasks exceptionally well over all distances. Among the many versions produced, the famous 190.48 was equipped with a powerful 480 HP engine which delivered impressive performance levels. Detailed plastic kit in scale 1:24

Model vehicles 1:24

1:24 Lamborghini Diabolo

€34.99

Article number: 510103685 Product: 1:24 Lamborghini Diabolo Model Dim.: 18,6 cm The Diablo was produced between 1990 and 2001. During this period, Lamborghini introduced several variations of the Diablo concept, the first being the Diablo VT (Visco Traction), which featured an all-wheel drive. The Diablo was destined to become the worthy heir of the renowned Miura and Countach. This newsupercar was wide, low and futuristic. And just like its predecessors, the Diablo soon became a favorite among car enthusiasts across the world. The Diablo models helped build the legend of Lamborghini and sold well. Almost 3,000 units across all series and variations found their buyers in those eleven years of evolution. The Lamborghini bosses had wished for a maximum speed of at least 320 kph, and the engineers made this wish come true: With a top speed of 325 kph and an acceleration from 0-100 in 4.5 seconds the Diablo claimed the pole position in the super sports cars segment. It delivered its power via a rear-wheel drive and came with a newly developed V12 engine. Four valves per cylinder, a computer controlled multi-point fuel injection and a displacement of 5.7 liters helped produce a maximum of 492 HP. Detailed plastic kit

Model vehicles 1:24

1:24 Land Rover Fire Truck

€37.99

Article number: 510003660 Product: 1/24 Land Rover Fire Truck Length of the model 185 mm New Parts The "Land Rover" was certainly one of the most famous symbols of "Made in England" automobile production and is a real milestone in the history of off-road vehicles. It was born immediately after the war, with the first prototypes realized on 1947. It has been characterized by the 4x4 traction system and by a robust and reliable design able to tackle the most difficult and challenging trails. The aluminum body provide lightness but, at the same time, more resistance against corrosions and more durable in time. In 1971, when the III Series was introduced, more than 1,000,000 of Land Rovers has been produced. Available in two versions: the "standard " one and the "long wheel base". Thanks to its extraordinary versatility was used in both military and civilian duties. Interesting the versions realized for the Fire Departments and made with the firefighting equipment. Detailed Plastic Kit

Model trucks 1:24

1:24 M-B Actros MP4 Show GigaSpace

€74.99

Article number: 510003935 Product: 1/24 M-B Actros MP4 Show GigaSpace Length of the model 269 mm NEW CHROMED PARTS SUPER DECALS SHEET Actros is the commercial name for Mercedes-Benz heavy truck range. The Actros range has been introduced in 1995 and quickly achieved a significant commercial success as a suitable solution to perform long-distance haulage and heavy-duties haulage. The New Actros, introduced on the market in 2012, is the most update and innovative expression of the heavy truck Mercedes family. It is characterised by an advanced and modern design and the adoption of new Euro 5 and Euro 6 engines. The vehicle configuration has been designed and developed to guarantee the highest operational efficiency minimising the running costs. Among the several configurations available it is particularly interesting the long-haul high-roof cabin version, design to offer the highest standard of comfort on board for two drivers. The Actros is also a good starting base to create fantastic ShowTrucks with liveries and graphics characterized by a high visual impact that are real masterpieces on wheels. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.