Italeri model kits

Model trucks 1:24

1:24 Mercedes-Benz 2238 6x4

€56.99

Article number: 510003943 Product: 1/24 Mercedes-Benz 2238 6x4 NEW DECAL SHEET The truck 2238 S 6 x 4 has been, for long time, the reference point for heavy duties on long range of Mercedes. The truck had both rear axles driven and a total of 375 horsepower. It was one of the heaviest Mercedes long distance truck and it had established new dimensions in international long distance traffic. The features of the engine OM422 allowed a particularly economic driving. The gear changes was reduced to a minimum, thus guaranteeing very smooth driving. It achieved a good commercial success all over the world. It’s reliable chassis was a platform to develop customization and dedicated versions for specific needs. It can be considered a starting point for the development of the next generations of road vehicles. Detailed Plastic Kit

Model trucks 1:24

1:24 Mercedes-Benz SK1844 LS V8

€59.99

Article number: 510003956 Product: 1:24 Mercedes-Benz SK1844 LS V8 The trucks of the Mercedes-Benz SK series ("Heavy Class" or "Schwere Klasse" in German) were manufactured from the late 1980s. The series is a direct development of the earlier NG models. Among other things, the cabin has been improved to offer more comfort on long journeys. Reliability has also been sustainably increased through the introduction of new technical and electronic solutions. Compared to the previous series, the design has also been significantly modernized. The market appreciated the vehicles of the SK series for their reliability, robustness and operational flexibility in all types of applications. The series' great commercial success led to exceptional longevity. At the end of the 1990s, the SK models were replaced by the first versions of the new Mercedes-Benz Actros. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35   Warning! Not suitable for children under 14 years.

Model trucks 1:24

1:24 Opel Blitz Truck

€45.99

Article number: 510003960 Product: 1:24 Opel Blitz Truck The Opel Blitz project was set up with the aim of mass producing a robust and reliable commercial vehicle that could be used for different applications and tasks. Opel began production of the early trucks, based on a typically US "layout", in its Russelsheim plant in the early 1930s. This was a success story that evolved over time and continued until the mid-1970s. The Opel Blitz’s sturdy structural characteristics were noted by the Wehrmacht and subsequently deployed by them during the Second World War, in both the 4x2 and 4x4 versions. However, its wartime role was later to be eclipsed by its the great commercial success as a civilian vehicle. During the post-war reconstruction period the Opel Blitz was indispensable to Germany’s recovery, being used by merchants, craftsmen, industrialists and many others to rebuild the country. Detailed Plastic Kit   Warning! Not suitable for children under 14 years.

Model trucks 1:24

1:24 Peterbilt 378 "Long Hauler"

€62.99

Article number: 510003857 Product: 1:24 Peterbilt 378 "Long Hauler" Mod.Dim.: 32,2 cm The Peterbilt model 378 represents one of the classic style US Trucks. Inside the 378 cab are highback seats and an ergonomically designed dashboard. The 378 could be ordered in many configurations from over the road tractor to a heavy hauler. Our model 378 features a 420HP Detroit Diesel engine. The sloped fiberglass hood tilts 90 degrees for full access to the engine. Our model features dual exhaust, twin chromed air cleaners, deep taper bumper and Peterbilt style wheels.

Model vehicles 1:24

1:24 Porsche 935 Baby

€37.99

Article number: 510003639 Product: 1:24 Porsche 935 Baby Model Dim.: 19,6 cm SUPER DECALS SHEET To compete in the FIA-Group 5 car competitions, Porsche developed a special car line characterized by dedicated engine and chassis solutions, beginning with the production of the famous 911 Turbo. Several versions of this model were made, but one of the most famous was the Porsche 935J. The "Baby" as it was known, was built to compete in the 2.0-liter German national championship. The car used a 1.425 air-cooled engine with a power performance of 261Kw. The Porsche 935J achieved an important victory in the 1977 German Grand Prix held in Hockenheim, that proved its excellent engine performance and design features. Detailed plastic kit in scale 1:24

Model vehicles 1:24

1:24 Range Rover Classic

Article number: 510003644 Product: 1:24 Range Rover Classic Model Dim.: 24,1 cm The Range Rover Classic can be considered a milestone in the history of off-road vehicles. It was produced in numerous variants and versions from 1970 to 1996. It was the first vehicle produced under the "Range Rover" brand and from 1981 it was available in the two- or four-door version. Thanks to its 4x4 traction and its sturdy structure, simple for construction but very reliable, the Range Rover was able to achieve very good off-road performances. The vehicle was able to obtain, very soon, good commercial success all over the World. The Range Rover, furthermore, was widely used by bodybuilders to create numerous special versions able to satisfy all types of needs. Continuously improved, during its career, in terms of engines, mechanical feature, interiors and details, it has always kept its role of "off-road" and "made in England" icon. Detailed Plastic Kit

Trailer model kits & Accessories

1:24 Reefer Trailer

€62.99

Article number: 510103904 Product: 1:24 Reefer Trailer Model Dim.: 58,7 cm NEW WHEELS This latest-generation semitrailer is representative of much of Europe’s on-road haulage vehicles. Featuring an efficient braking system, side impact protection, a considerable load capacity, these trailers are used extensively and are produced by at least ten or so specialised companies, which provide a comprehensive range of variants to meet the specific needs of individual customers. Detailed Plastic Kit of model Reefer Trailer in scale 1:24

Model vehicles 1:24

1:24 Renault R5 Rally

€36.99

Article number: 510103652 Product: 1:24 Renault R5 Rally Model Dim.: 16,7 cm For the 1977 Rally season the French company Renault developed a racing version of the popular small R5. In spite of the fact that this car was designed for very different scopes, after adequate preparation, the French technicians managed to obtain notable power from the engine: 150CV, and a noteworthy drive ration, which thanks to the contained weight of only 800 Kg. made the R5 a very manoeuvrable and fast car. The R5 obtained great results in the Sanremo and Montecarlo Rallies in 1978 and successively gratifying results in the Acropolis Rally and in Africa. Detailed Plastic Kit of model Renauls R5 Rally in scale 1:24

Model vehicles 1:24

1:24 Rolls Royce Phantom II

€32.99

Article number: 510003703 Product: 1/24 Rolls Royce Phantom II The model Rolls Royce Phantom II in 1/24 scale has a length of about 235 mm. The Rolls-Royce Phantom II was introduced in 1929. With this new model the tradition of the manufacturer was continued: To build beautiful and expensive cars. Each body was made to order of each customer. Our model belongs to the P-2 series, which was built in 1934. The original, from which this model, was copied, can still be found in the famous Stratford Motor Museum in England.

Model trucks 1:24

1:24 Scania 143M 500 Streamline 4x2

€59.99

Article number: 510003950 Product: 1:24 Scania 143M 500 Streamline 4x2 The Scania R143 M Streamline was an iconic benchmark in the production lines of the famous Scandinavian manufacturer, which achieved considerable commercial success in various European and non-European markets between the end of the 1980s and the mid-1990s. The Scania R143M was assembled at the Södertälje production site in Sweden and was one of the most successful models of the "series 3", first introduced by Scania in 1987 and following on from the innovative "series 2" of the 1980s. Powerful and reliable thanks to its 500 horsepower V-8 engine, it was designed with the most advanced technologies of the time. Great attention was paid to its design to reduce aerodynamic resistance and minimize fuel consumption, an important factor for success in using heavy transport over long distances. Scania's tractor unit, with its two-wheel drive configuration, was also acclaimed for its ease of maintenance and low operating and management costs.

Model trucks 1:24

1:24 Scania 164L Topclass

€70.99

Article number: 510003922 Product: 1:24 Scania 164L Topclass Model Dim.: 24,2 cm SUPER DECALS SHEET FOR 2 VERSIONS - ADHESIVE STENCIL - NEW TYRES - ADDITIONAL CHROMED PARTS AND WHEEL RIMS The Scania 164 has been a reference point of heavy commercial vehicles from the latest part of ‘90s to the first half of the following decade. It was the spearhead of the "Series 4" and it achieved a significant commercial success in a lot of Countries all over the World. The 16-litre engine was able to guarantee power and reliability minimizing, at the same time, the running costs. The 164L "Top Class" was characterized by the highest level of comfort on board either in running conditions or during the rest and parking. The design and the development of the vehicle was able to enhance the active and passive safety. Not least the aerodynamic restyling allowed to have an optimization in fuel consumption even at the high speed. Detailed Plastic Kit of model Scania 164L Topclass in scale 1:24

Model trucks 1:24

1:24 Scania 770 4x2 Normal Roof

€79.99

Article number: 510003961 Product: 1:24 Scania 770 4x2 Normal Roof Scania S series – a key player in the industrial and heavy commercial vehicles market – has been designed to meet long-range logistics and transportation needs. The new S series was introduced by the famous Scandinavian manufacturer to the market in 2016, and included new innovative design solutions. Key design features were incorporated to optimize the use of the space inside the cabin to enhance driver comfort, and greater attention was afforded to more modern ‘active and passive’ safety systems to aid driver control and overall vehicle management. The attractive and contemporary new design also reflected the modern aerodynamics of the vehicle and its reduced fuel consumption targets. The Scania S770 4x2 "Normal Roof" with compact cab and the "Highline" version with the oversized cab, are the industry ‘road tractors’ produced by the famous Scandinavian manufacturer of heavy commercial vehicles, with both versions offering excellent options for differing professional and operational requirements. Detailed Plastic Kit

Model trucks 1:24

1:24 Scania 770 S V8 "White Cab"

€71.99

Article number: 510003965 Product: 1:24 Scania 770 S V8 "White Cab" Scania S series – a key player in the industrial and heavy commercial vehicles market – has been designed to meet long-range logistics and transportation needs. The new S series was introduced by the famous Scandinavian manufacturer to the market in 2016, and included new innovative design solutions. Key design features were incorporated to optimize the use of the space inside the cabin to enhance driver comfort, and greater attention was afforded to more modern ‘active and passive’ safety systems to aid driver control and overall vehicle management. The attractive and contemporary new design also reflected the modern aerodynamics of the vehicle and its reduced fuel consumption targets. The Scania S770 4x2 with compact cab and the "Highline" version with the oversized cab, are the industry ‘road tractors’ produced by the famous Scandanavian manufacturer of heavy commercial vehicles, with both versions offering excellent options for differing professional and operational requirements.   Warning! Not suitable for children under 14 years.

Model trucks 1:24

1:24 Scania R400 Streamline (Flat Roof)

€61.99

Article number: 510003947 Product: 1:24 Scania R400 Streamline (Flat Roof) Length of the model 247 mm DECALS SHEET FOR 2 VERSIONS The Scania R-series Streamline is designed to meet the highest demands in terms of fuel economy, driver comfort and reliability. The unique style of the exterior is combined with new exceptional interiors offer exceptional driver comfort and a wide range of choices of colors and materials. Available with both V8 engines and online. Robust, responsive and efficient, the Scania V8 engines are built to carry out the toughest jobs. Our model is also completed by a decals sheet and an accurate sheet of metallic adhesive, already ready for the application, for a correct finishing of the tractor vehicle, exactly as in the real. Detailed Plastic Kit of model

Model trucks 1:24

1:24 SCANIA R730 Streamline "Chimera"

€70.99

Article number: 510003930 Product: 1:24 SCANIA R730 Streamline "Chimera" Model Dim.: 24,7 cm SUPER DECALS SHEET FOR 2 VERSIONS - ADHESIVE STENCIL - NEW TYRES - CHROMED WHEEL RIMS The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the current world market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series Streamline version, produced in 2013, is designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road and is considered the number one for "SHOW TRUCKS", the famous decorated tractors. The extraordinary exterior style is matched with exclusive new interiors which provide exceptional comfort for the driver and a wide range of color and material options. Our model reproduce in 1:24 scale the tractor created by the well-known Swedish company SVEMPAS AB, for the technical assistance of the tractor in the racing version called SCANIA "CHIMERA". Detailed Plastic Kit of model SCANIA R730 Streamline "Chimera" in scale 1:24

Model trucks 1:24

1:24 Scania R730 Streamline 4x2

€71.99

Article number: 510003906 Product: 1/24 SCANIA R730 STREAMLINE 4x2 Model Dim.: 24,7 cm UPGRADE MOULDS - SUPER DECALS FOR 2 VERSIONS - SUPER CROMED ADHESIVE - ADDITIONAL CROMED PARTS The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the current world market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series is designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road and is considered the number one for "SHOW TRUCKS", the famous decorated tractors. The extraordinary exterior style is matched with exclusive new interiors which provide exceptional comfort for the driver and a wide range of colour and material options. In addition, our tractor model is finished with fantastic decals and metallised stickers ready to be applied. The packaging also contains new chromed plastic parts that give the model a realistic appearance. Detailed Plastic Kit of model "Scania R730 Streamline 4x2" in scale 1:24

Model trucks 1:24

1:24 SCANIA R730 Streamline Highline Cab

€58.99

Article number: 510003932 Product: 1:24 SCANIA R730 Streamline Highline Cab Model Dim.: 24,7 cm SUPER DECALS SHEET The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the recent World market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series Streamline version, produced in 2013, was designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road The continuous evolution of the cabin allowed to reach the highest levels of driving comfort and habitability even in the most demanding long-haul commercial Transport activities. Detailed Plastic Kit of model SCANIA R730 Streamline - Highline Cab in scale 1:24

Model trucks 1:24

1:24 Scania R730 V8 Black Amber

€69.99

Article number: 510003897 Product: 1:24 Scania R730 V8 Black Amber Model Dim.: 24,7 cm With special Amber Metallic acrylic paint 30ml included. In 2011, a new link was added to the prestigious chain of limited editions launched by Scania (TOP CLASS in 2002, THE KING in 2003, THE GRIFFIN in 2006, BLUE SHARK in 2008 and DARK DIAMOND in 2009) and created in partnership with "SVEMPAS AB", the famous Swedish truck manufacturer Sven Erik "Svempa" Bergendahl. The top of the range, or the road tractor R 730 LA4x2MNA Euro 5 V8 engine, the dream of many drivers and transport operators, is equipped with the most exclusive technical features and further enhanced with an exclusive range of accessories and special finishes. The most characteristic feature is the CR19 TOPLINE cabin in the TITANIUM version. Exclusive "Black Amber" metallic paint for the cab and plastic parts. Black Amber silkscreen with elegant flame pattern in carbon black with clear amber outline, ESP, LED brake lights on spoiler, xenon headlights in the sun visor and side lights integrated with the running boards, unique decorations outside cabin and side skirts, front instrument panel and steering wheel covered with leather, 22" TV/DVD and much more.

Model trucks 1:24

1:24 Scania R730 V8 Topline Imperial

€69.99

Article number: 510003883 Product: 1/24 Scania R730 V8 Topline Imperial Model Dim.: 24,7 cm SUPER STICKERS & DECALS SHEET - ADDITIONAL CHROMED PARTS AND WHEEL RIMS The Scania Series R heavy-tractor is available with V8 engine and has been developed according to the current world market requirements. The V8 SCANIA engines are designed to carry out the most demanding tasks and are appreciated for their sturdiness, reactivity, and efficiency. The Scania R Series is designed to meet the most demanding requirements in terms of fuel-saving and reliability. The exterior design gives the vehicle a huge view of the road and is considered the number one for "SHOW TRUCKS", the famous decorated tractors. The extraordinary exterior style is matched with exclusive new interiors which provide exceptional comfort for the driver and a wide range of colour and material options. In addition, our tractor model is finished with fantastic decals and metallized stickers ready to be applied. The packaging also contains new chromed plastic parts that give the model a realistic appearance.

Model trucks 1:24

1:24 SCANIA S730 Highline 4x2

€84.99

Article number: 510003927 Product: 1:24 SCANIA S730 Highline 4x2 Scania's S series is a benchmark on the market for heavy commercial and industrial vehicles designed to meet the needs of long-haul logistics and transport. The new S series was introduced by the famous Scandinavian manufacturer on the market in the second half of the last decade by adopting innovative design solutions. The new project was in fact created to optimize the use of the spaces inside the cabin and enhance the driver's comfort. Great attention to active and passive safety through the adoption of the most modern control and driver assistance systems. The new design, attractive and modern, was also created to take into account the aerodynamics of the vehicle and the reduction in fuel consumption. An important "success factor" of the Scania tractor is in fact operating efficiency, minimization of consumption and attention to emissions. The "Highline" version with the larger cabin further amplifies the vocation of the "S" line to fulfill long-distance transport and logistics commitments. Detailed plastic kit in scale 1:32

Trailer model kits & Accessories

1:24 Tecnokar Trailer w/ 20ft Tank

€62.99

Article number: 510003929 Product: 1:24 Tecnokar Trailer w/ 20ft Tank Model Dim.: 28,8 cm NEW MOULDS - CONTAINS PHOTO-ETCHED FRET The 20" Tecnokar Tank trailer is designed to ensure the highest level of efficiency in the liquid and fluid transport. The sturdy steel frame, on a three-axle system, made by the Italian Company, is able to load a 20" tank ideal to be used in the container intermodal logistic. It can well satisfy the need of complex and integrated logistic companies that adopting intermodal transport solution of liquid goods. That’s more and more important taking in consideration that, in the recent years, the intermodal transport solution of liquids, especially the liquids destined to the food industry, is a "must have" to guarantee reliability and respect of the delivery time. Detailed Plastic Kit of model Tecnokar Trailer w/ 20ft Tank in scale 1:24

Trailer model kits & Accessories

1:24 Timber Trailer

€57.99

Article number: 510003868 Product: 1:24 Timber Trailer Mod.Dim.: 56 cm This trailer is especially designed for the transportation of logs and timber. It has a sturdy frame with wheels equipped with a complex three-axle shock absorber reinforced to accommodate heavy loads. Along the loading platform a series of extensible structures are in place to hold trunks of various sizes. These trailers are very popular in Europe and are combined with heavy tractors with two or three axes.

Trailer model kits & Accessories

1:24 Trailer Rubber Tyres (8x)

€12.99

Article number: 510003890 Product: 1/24 Trailer Rubber-Tyres (8x) 8 RUBBER TYRES IN ONE BOX   Warning! Not suitable for children under 14 years.

Trailer model kits & Accessories

1:24 Truck Accessories Set

€35.99

Detailed plastic kit

Trailer model kits & Accessories

1:24 Truck Rubber Tyres (8x)

€12.99

8 RUBBER TYRES IN ONE BOX   Warning! Not suitable for children under 14 years.

Model trucks 1:24

1:24 U.S. Superliner Power Truck

€62.99

Article number: 510003820 Product: 1/24 U.S. Superliner Power Truck Model Dim.: 35,22 cm This large tractor is representative of many trucks used in the USA. Equipped with powerful engines and very large fuel tanks, these vehicles travel hundreds of miles at a time from one State to another. Characterised by large drive cabs with in-built sleeping facilities and every other possible comfort, they are, for their American drivers, a true home from home. Numerous on the road movies have succeeded in making this category even more popular.

Model trucks 1:24

1:24 US CLASSIC WESTERN STAR

€59.99

Article number: 510003915 Product: 1:24 US CLASSIC WESTERN STAR Model Dim.: 34,0 cm SUPER DECALS SHEET The Western Star started to design and to build industrial vehicles in 1967. Since the beginning the Western Star product line up was a good synthesis, for its features, of the "ideal" American heavy truck. In particular the trucks dedicate to perform the highway transportation duties are still the reference point in the Western Star range. The American manufacturer is specialised in "tailor made", in terms of engines, gearboxes and frames, and customised trucks in order to meet the specific customers needs. However the customisation doesn’t stop to the technical configuration made by the factory. Most of time the passionate drivers used to equip their trucks with a wide adoption of accessories and chromed parts that make them unique and authentic "masterpieces" on wheels. Deatailed plastic kit of model US CLASSIC WESTERN STAR in scale 1:24

Model trucks 1:24

1:24 US Wrecker Truck

€69.99

Article number: 510003825 Product: 1:24 US Wrecker Truck Mod.Dim.: 34,5 cm Every year, more and more goods trucks roll onto the roads of the United States: inevitably, this has led to an increase in the number of vehicles designed to handle truck breakdowns. These breakdown vehicles – nothing less than true mobile workshops – are a common sight along the roads of this immense country. Numerous compartments on the flanks of the vehicle contain all the materials and tools needed for the fast repair of damaged trucks; moreover, the heavy-duty towing gear at the rear of the vehicle allows trucks to be taken to the nearest full-scale workshop when repairs cannot be completed at the roadside.

Model vehicles 1:24

1:24 Volvo 760 GLE

€35.99

Article number: 510003623 Product: 1:48 Aermacchi MB 326 During the 1980s, Volvo’s 700 series was at the forefront of their auto production lines. First introduced in 1982, it was characterized by great attention to detail and a high level of finish, consistent with the "premium" positioning it strived for within both the European and US markets. The first model to be released was the Volvo 760. Available initially in a sedan configuration, it was noteworthy in design terms for its clean, square lines and a vertical rear window. The "powertrain" as it was known, was available with one of two 6-cylinder engines, the petrol injection with a V layout and a displacement of 2,849 cm3, and also a 6-cylinder in-line turbodiesel from 2,383 cm3. In 1985 the range expanded with the introduction of the station wagon version which was a notable commercial success in some European markets, in part due to its balance between comfort and versatility. The series engine range was also later expanded with the introduction of a new petrol-powered, turbocharged engine.

Model trucks 1:24

1:24 Volvo F-12 Intercooler Low Roof

€62.99

Detailed plastic kit in scale 1:32

Model trucks 1:24

1:24 VOLVO F-16 Globetrotter

€55.99

Article number: 510003923 Product: 1:24 VOLVO F-16 Globetrotter Model Dim.: 24,0 cm About ten years after the release of the F-12, and because of its success with it, in 1988 Volvo launched the new F-16 with its state-of the-art features. Equipped with heavy-duty chassis, the truck features extensive hauling capacity, low fuel consumption and high travel comfort combined with a reliable and powerful engine which made it a leader in its category. The characteristics of ist 6 cylinder turbo-compressed 16000cc Intercooler engine are an output of 465 HP at 1200 rpm. The F-16 is thus well equipped to take care of long distance heavy load trucking. Of the various Versions offered by Volvo, our model represents the 2-axle tractor variant with the high (GLOBETROTTER) cabin. Detailed Plastic Kit of model VOLVO F-16 Globetrotter in scale 1:24

Model trucks 1:24

1:24 Volvo F16 Plane m. Hebebühne

€69.99

Article number: 510003945 Product: 1:24 Volvo F16 Plane m. Hebebühne Super Decals Sheet Model Dim.: 37,5 cm Introduced to the market in 1988, the Volvo F16 achieved considerable commercial success largely due to its innovative "powertrain" line which was able to achieve a high level of driving performance, low fuel consumption and low running and maintenance costs. The exceptional features of its 6-cylinder engine were complemented by the innovative "Globetrotter" cab which provided exceptional on board comfort. The sturdy frame served as a developmental platform for the creation of numerous specially outfitted versions to meet a wide range of differing customer requirements. One configuration that was particularly appreciated and used by long and medium-range logistics operators was the canvass rear deck. This feature was characterised by good size/space ratios and further enhanced by the rear hydraulic platform which facilitated easy loading and unloading of goods. Detailed plastic kit in scale 1:24

Model trucks 1:24

1:24 VOLVO FH Plat Dak

€79.99

Article number: 510003962 Product: 1:24 VOLVO FH Plat Dak The Volvo FH III series represents the pinnacle of construction technology from the renowned brand of commercial and industrial vehicles. Its modern and appealing design has been crafted to optimize aerodynamics and minimize fuel consumption to ensure the highest standards of operational efficiency. The cabin, available in various configurations including the "Low Roof" version, has been designed to offer the highest standards of active and passive safety. Additionally, the vehicle is equipped with modern driver assistance systems and risk prevention features. There are numerous customization options available to tailor the vehicle precisely to specific transportation needs. The "tractor" configuration has been designed to be lightweight and rational, ensuring maximum versatility for any application.   Warning! Not suitable for children under 14 years.

Model trucks 1:24

1:24 VOLVO FH16 "Viking"

€71.99

Article number: 510003931 Product: 1:24 VOLVO FH16 "Viking" Model Dim.: 25,0 cm SUPER DECALS SHEET ADDITIONAL CROMED PARTS - NEW TYRES - CHROMED WHEEL RIMS With the new Volvo FH16, Volvo once again offers a truck in the heaviest segment. It is based on the FH Series that was launched in autumn 2001, but it also features new technology that is unique to the Volvo FH16. The new Volvo FH16 is the most powerful, comfortable and safe model ever built by Volvo Trucks. Among the highlights of the new model are an all-new 16-litre engine with a power output of 610 horsepower, an exclusive interior and body features, and an advanced active safety system. The Volvo FH16 Series is built to tackle the toughest transport assignments with high gross vehicle weights and high average speeds in hilly terrain. Detailed Plastic Kit of model VOLVO FH16 "Viking" in scale 1:24   Warning! Not suitable for children under 14 years.

Model trucks 1:24

1:24 Volvo FH16 GLOBETROTTER XL

€57.99

The model Volvo FH16 GLOBETROTTER XL in 1/24 scale has a length of about 244 mm. With the new Volvo FH16, Volvo once again offers a truck in the heaviest segment. It is based on the FH Series that was launched in autumn 2001, but it also features new technology that is unique to the Volvo FH16. The new Volvo FH16 is the most powerful, comfortable and safe model ever built by Volvo Trucks. Among the highlights of the new model are an all-new 16-litre engine with a power output of 610 horsepower, an exclusive interior and body features, and an advanced active safety system. The Volvo FH16 Series is built to tackle the toughest transport assignments with high gross vehicle weights and high average speeds in hilly terrain.

Model trucks 1:24

1:24 Volvo FH4 Globetrotter /Medium Roof

€78.99

Article number: 510003942 Product: 1:24 Volvo FH4 Globetrotter /Medium Roof Model Dim.: 24,6 cm Upgraded moulds - New parts - New photo-etched fret - Super decals sheet - Additional chromed decals - Chromed adhesive - Colors Instructions sheet The Volvo FH is the highest expression, in terms of development and technology, of the famous commercial and industrial vehicles brand. Its modern and eye-catching design has been made to optimize aerodynamics, to minimize consumption and to ensure the highest standards of operational efficiency. The cabin has been developed to offer the highest active and passive safety standards. The vehicle is also equipped with modern driving assistance and risk prevention systems. There are several possibilities for customizing the vehicle in order to respond promptly and precisely to any kind of transportation needs. The Globetrotter cab (CAB-HSLP) permits comfortable overnight stays for one or two people. Moreover, its vertical structure ensures a large capacity and capability for extra compartments. The internal height is 205cm. With the benefit of leading-edge software solutions the diesel engine of the VOLVO line has a lower impact on the environment and incorporates some of the best practices of cutting-edge technologies.

Model trucks 1:24

1:24 Volvo FH4 Globetrotter XL

€74.99

Article number: 510003940 Product: 1:24 Volvo FH4 Globetrotter XL Model Dim.: 24,6 cm 100% New Moulds Fully detailed interiors - Fully detailed engine and frame - Open or closed driver door - Chromed adhesive - Photo etched parts - The Volvo FH is the highest expression, in terms of development and technology, of the famous commercial and industrial vehicles brand. Its modern and eye-catching design has been made to optimize aerodynamics, to minimize consumption and to ensure the highest standards of operational efficiency. The cabin has been developed to offer the highest active and passive safety standards. The vehicle is also equipped with modern driving assistance and risk prevention systems. There are several possibilities for customizing the vehicle in order to respond promptly and precisely to any kind of transportation needs. The Globetrotter XL cabin is the ideal solution to host two people and, thanks to the increased height it offered a better storage capability. The FH4 version is powered with the powerful 6 cylinders Euro 6 13 liters diesel engine. In 2014 Volvo FH4 won the "International Truck of the Year" award assigned by a pool of journalists of the most important European trucks magazines. Detailed Plastic Kit of model

Model trucks 1:24

1:24 Volvo VN 780 Tractor Truck 3Axle

€70.99

Article number: 510003892 Product: 1/24 Volvo VN 780 Tractor Truck 3Axle Model Dim.: 34,5 cm SUPER DECALS SHEET FOR 2 VERSIONS - CHROMED ADHESIVE - CHROMED WHEEL RIMS The new VOLVO VN 780 tractor, an evolution of the NH 12 series, is specifically aimed at the American market, where the previous version has already proved popular and more than capable of competing with traditional US-built trucks.Characterised by a spacious drive cab, with sleeping facilities and every other comfort needed for the long-haul journeys typical of the US market, the vehicle has been completely restyled and the engine improved to contain fuel consumption and reduce emissions.   Warning! Not suitable for children under 14 years.

Model vehicles 1:24

1:24 VW Golf GTI Rabbit

€37.99

Article number: 510003622 Product: 1:24 VW Golf GTI Rabbit The Volkswagen Golf is an iconic vehicle designed and produced by the Wolfsburg car manufacturer. It was first introduced in Spring 1974 and immediately became a highly successful commercial product. The first series (1974-1983), offered leading edge technical capabilities to a very receptive consumer market of that period, including a water-cooled front engine, front-wheel drive, solid and robust bodywork with a functional but equally attractive design. The high quality to price ratio was the real "competitive edge" that made the Golf so successful however. At the Frankfurt Motor Show in 1975, the sporty version Golf GTI was introduced which incorporated the high performance 110 HP 1,600 cc engine. The following year saw the mass production of the Golf GTI and in just two months it achieved notable commercial successes in many European and non-European countries Detailed plastic kit

Model vehicles 1:24

1:24 VW Golf “POLIZEI”

€36.99

The version used by the German Police during the 1970s and early 1980s was symbolic of everyday life during that period. Detailed plastic kit

Military aircraft models 1:32

1:32 F-104G/S - RF-104G Starfighter

€105.00

Detailed Plastic Kit of model F-104G/S - RF-104G Starfighter - Upgraded Edition with Pod Orpheus in scale 1:32 <   Warning! Not suitable for children under 14 years.

Military aircraft models 1:32

1:32 Lockheed F-35A Lighting II

€110.00

Article number: 510002506 Product: 1:32 Lockheed F-35A Lighting II Model Dim.: 49,0 cm 100% NEW MOULD - SUPER DECALS SHEET FOR 6 VERSIONS - PHOTO ETCHED PARTS - COLOURED INSTRUCTION SHEET AND NEW STICKERS MASKS SHEET The JSF Joint Strike Fighter program was set up to develop a new fifth-generation all-weather multirole combat aircraft a ble to replace the existing United States and NATO strike-fighters. The aerospace industry team led by Lockheed Martin generated the single-seat, single-engine, F-35 Lightning II. It adopts stealth technology and it is characterized by the trapezoidal wings and by the use of the most advanced hi-tech materials and avionic systems. Developed to perform air superiority, close air support and ground attack missions, it has been design in different configurations. The F-35A is the conventional takeoff and landing variant, the F-35B is the short takeoff and vertical landing variant and the F-35C, with foldable-wings, has been developed to be used from conventional deck carriers. Thanks to its operational flexibility, the advanced on-board technology and the impressive project innovation, the F-35 lightning II will be a reference aircraft in the twenty-first century military aviation. Deatailed plastic kit of model Lockheed F-35A Lighting II in scale 1:32

Military aircraft models 1:32

1:32 Macchi MC. 202

€105.00

Article number: 510002518 Product: 1:32 Macchi MC. 202 The introduction of the Macchi MC 202 Folgore was a significant development for the fighter squadrons of the Italian Regia Aeronautica. Stylishly designed from an aerodynamical perspective, it was fitted with the powerful German DB 601 engine produced under license by the Italian aeronautical industry. The engine and overall aeronautical performance of the aircraft provided the Regia Aeronautica with a fighter capable of actively engaging Allied fighters. The flight performance compared to the previous generation of fighters equipped with radial engines, such as the Fiat G-50 and the Macchi Mc-200, was in fact much better. Manoeuvrable and fast (it was able to reach 600 km h), it was armed, in the early versions, with two 12.7 mm Breda-SAFAT machine guns installed in the nose. Only in later versions were the armaments improved with additional machine-guns installed in the wings. Detailed plastic kit in scale 1:32

Military model vehicles 1:35

1:35 1/4 Ton 4x4 US Ambulance Vehicle

€11.99

Article number: 510000326 Product: 1:35 1/4 Ton 4x4 US Ambulance Vehicle Model Dim.: 11,8 cm Decals for 2 versions The ubiquitous jeep is perhaps the most all-round vehicle ever constructed. Because it xas ruggedly built and thus able to traverse most types of terrain without suffering structural damage, one of the task assigned to the jeep was that of ambulance service.

Military model vehicles 1:35

1:35 15cm Panzerwerfer 42 auf SWS

€31.99

Article number: 510006562 Product: 1:35 15cm Panzerwerfer 42 auf SWS Length of the model 198 mm NEW DECAL SHEET The Schwerer Wehrmachtschlepper (SWS) was developed as a medium half-track and used to transport supplies to front-line troops or as a towing vehicle for the light artillery. However, on the large rear flat load compartment some other applications have been developed. One modification was the Panzerwerfer 42 auf SWS, a 10 barreled 15 cm Nebelwerfer 42 rocket launched placed over an armored ammunition storage compartment. The rocket launcher, developed as device to create smoke screens, was soon used as real artillery able to launch high-explosive ammunitions. It could shoot the rocktes with impressive and deadly. Detailed Plastic Kit of model 15cm Panzerwerfer 42 auf SWS in scale 1:35

Military figures & accessories 1:35

1:35 20' Military Container

€21.99

Article number: 510006516 Product: 1:35 20' Military Container Model Dim.: 17,4 cm 100% NEW MOULD Decals for 3 versions The 20-feet freight container is a key element for the international logistics. The 20-feet freight container, and the larger version and roomy 40-feet container, are in fact the international standard reference for all Countries. The standardize container – in terms of size, volumes and loading capacity – makes possible to optimize the intermodal freight by ships, trains and trucks. The logistic has became more effective and faster. Even the warehouses and stocking areas management became easier and more flexible.Thanks to its features and flexibility the 20-feet container has been adopted by several Armies to optimize the logistic and the ground support activities.

Military model vehicles 1:35

1:35 Bedford QL Truck

€36.99

Article number: 510000241 Product: 1:35 Bedford QL Truck The Bedford QL line of military trucks was established in the late 1930s for the British Army to have a more modern and flexible transport vehicle. Following the conclusion of testing in 1940 and in early 1941, the Bedford QLs were distributed to Army Corps, Regiments and other Units. For the duration of the war it was deployed on various fronts, proving to be a highly effective support vehicle for meeting both logistical and transportation needs due to its four-wheel drive and relatively low weight which further enhanced its load capacity. With its flexibility and robustness, it was also used for towing and transporting artillery pieces such as the 6 pounder anti-tank gun and the 40mm Bofors anti-aircraft gun. Equipped with a 72 horsepower 6-cylinder petrol engine, it was also notable for its ease of maintenance and repair, an important feature on the battlefield. Detailed Plastic Kit

Military model vehicles 1:35

1:35 BMW R 75 with Side Car

€11.99

Article number: 510000315 Product: 1:35 BMW R 75 with Side Car Model Dim.: 6,6 cm Contains 3 figures. Decal for one version. The new German army made use of the experiences collected in World War I to realize their modern reconstruction based on motorization. In spite of the limitations of the Treaty of Versailles able commanders introduced civilian vehicles into the army, thus creating a motorized mentality. In 1940 already, a battalion consisting of 3 to 4 companies each equipped with 52 motorcycles with sidecars and 4 motorcy-cles (single), was integrated into the motorized infantry and the armored divisions. Moreover, motorcycles were present in nearly all other Wehrmacht units, especially with the reconaissance units and the command, as well as the pioneer and the supply units. Produced in 16.500 units, the BMW R 75 together with the Zijndapp KS 750 formed the nucleus of the motorized units on all theatres of operations, especially in Africa and in Russia. The motorcycle was armored with an MG 34 mounted on the sidecar. On the road, it reached a maximum speed of 92 Km/h.

Military figures & accessories 1:35

1:35 Brit. Crusader Mk.III w/ Tank crew

€36.99

Article number: 510006592 Product: 1:35 Brit. Crusader Mk.III m. Besatzung Designed at the beginning of the Second World War, the Crusader was one of the most important British "Cruiser" tanks reaching a production of over 5,000 units. Equipped with Christie suspension with large diameter rolling wheels, the Crusader possessed remarkable driving skills on rough terrain. The first versions of Mk. I and Mk. II were armed with a 2 pdr cannon. later replaced by the more powerful 6 pdr cannon. in the Mk.III version. Lacking adequate armor against enemy fire, it was also very vulnerable to enemy mines and anti-tank guns, and its armament was often inadequate in front of similar German vehicles. However, when used in a coordinated way, they managed to achieve good results. Detailed plastic kit

Military model vehicles 1:35

1:35 Carro Armato P40

€36.99

Article number: 510006599 Product: 1:35 Carro Armato P40 The early years of WW2 highlighted the inadequacies of Italian medium tanks in modern warfare, which was now characterized by clashes between heavily armed and heavily armored tanks, and also by the use of more effective and lethal anti-tank weapons. Following detailed analysis of German and wartime opponents British and Soviet military vehicles, a 26 ton heavy tank was created. This new tank, which underwent several design changes over time, incorporated more modern features such as inclined front plates, a more powerful and better performing 420 HP diesel engine and a more suitable main armament, the 75/34 Ansaldo gun. The P26/40 as it would forever be known, unfortunately retained some obsolescent features that were characteristic of Italian armoured vehicle production from the mid 1930s, namely the armor plate riveting snd the leaf spring suspension system. Detailed plastic kit

Military model vehicles 1:35

1:35 Chevrolet 15 CWT

€30.99

Detailed plastic kit   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Commando Car

€12.49

Article number: 510000320 Product: 1/35 Gefechtswagen Model Dim.: 9,5 cm 1 FIGURE INCLUDED Much work was carried out in the USA and Britain to design special airborne vehicles to drop behind the enemy lines. Willys MB-Jeeps engaged in helping the Infantry by clearing snipers and other commando tasks. Generally manned by a sergeant and a trooper this vehicle was modified in many respects. It was armed with no fewer than five machine guns and had additional tanks for 135 l. of fuel.

Military model vehicles 1:35

1:35 Dt. Pzkpfw.IV F1/F2/G m. DAK Fig.

€36.99

Article number: 510006593 Product: 1:35 Dt. Pzkpfw.IV F1/F2/G m. DAK Fig. The Panzer IV was the most extensively used German tank during the Second World War. It represented the "backbone" of the German Panzer Divisions on all operational theaters. The production of Panzer IV Ausf. F, started in 1941, marked a decisive boost in the evolution of the tank. It featured an improved armor on the turret and hull. The first version of Panzer IV F, featuring the traditional 7.5 cm. KwK 37 short-barreled cannon, were not able to fight successfully against the Soviet T-34 and KV-1 heavy armored tank. The adoption of the anti-tank design KwK 40 long-barreled cannon, on the Ausf. F2 version, has decisively increased the Panzer IV effectiveness against enemy tanks. Thanks to its new high velocity and high penetration gun, the Panzer IV became, once again, "lethal" on the battlefields. They were used, albeit in limited numbers, with the 15th and 21st Panzer Divisions on the North African front. Detailed plastic kit

Military model vehicles 1:35

1:35 Dt. Sd.Kfz.138 Marder III Ausf. H

€31.99

Article number: 510006566 Product: 1:35 Dt. Sd.Kfz.138 Marder III Ausf. H The tank destroyer Marder III Sd.Kfz. 138 was developed for the Wehrmacht on the basis of the now obsolete Czechoslovak-made Panzerkampfwagen 38(t). It went into production in 1942 for the needs of the eastern operation area and was used on all fronts until the end of the war. A major improvement was the installation of an effective 75 mm anti-tank gun protected by a slanted steel shield. In order to better protect the soldiers, the engine was placed in the rear part of the vehicle and the weapon system in the middle. With the Marder III, the Wehrmacht had an easy-to-manufacture tank destroyer with high firepower that was capable of fighting the most important tanks of the time. Detailed Plastic Kit of model Schnellboot Typ S-38 mit 4.0cm Flak 28 (Bofors) in scale 1:35   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 Dt. SdKfz. 234/2 Puma 8-Rad

€35.99

Article number: 510006572 Product: 1:35 Dt. SdKfz. 234/2 Puma 8-Rad The German armored car ‘Schwerer Panzerspähwagen Sd.Kfz. 234/2’ known as "Puma", was developed and produced by the German war machine in the closing years of WW2. The vehicle proved to be an excellent mix of mobility, protection and firepower which was built upon the operational experience gained by the Wehrmacht in the early stages of the conflict. From 1939 onwards the German army had used armored vehicles very effectively for advanced reconnaissance tasks, and also in a ground support role for its troops. The "Puma" was initially a reconnaissance vehicle, but due to its KwK 39 L / 60 50 mm gun it could also be used equally effectively in offensive actions against infantry and other armored vehicles. It was deployed in limited numbers on both the Eastern and Western fronts. The highly effective independent suspension system of the eight wheels and the powerful engine, enabled the Puma to reach speeds of up to 90 km/h on all types of battlefield terrain. Detailed plastic kit in scale 1:35

Military model vehicles 1:35

1:35 DUKW Amphibious vehicle

€32.99

Article number: 510006392 Product: 1:35 DUKW Amphibious vehicle To meet the logistical needs of the US Army landing forces in transferring loads quickly and efficiently from ships to beaches, the American General Motor CCKW-353 2½ t 6x6 amphibious version tactical transport truck was designed and built for this purpose. The basic vehicle components were the same as the GMC road truck with its 4,400 cm3 6-cylinder engine, three differentials and six driving wheels. The DUKW was characterized by a welded hull to make it amphibious, which was then reinforced by horizontal ribs. Its key attribute however was its extraordinary versatility and load capacity. It could carry a 2,400 kg payload or 25 fully equipped troops. DUKWs were deployed extensively in all theaters of war by the U.S. Army, U.S. Marines and the armed forces of numerous Allied countries. Notably, they featured in many significant WW11 beach landings including the D-Day Normandy landings at Utah and Omaha and also at Salerno, Anzio and on the beaches of the Pacific campaign. Kit, instructions, decor

Military figures & accessories 1:35

1:35 ELCO 80' PT Boat Crew

€19.99

Article number: 510005606 Product: 1/35 ELCO 80' PT Boat Crew 10 FIGURES INCLUDED Deatailed plastic kit of model Figuren-Set Crew (10) ELCO 80 PT in scale 1:35

Military model vehicles 1:35

1:35 Ger. Sd.Kfz.167 Sturmgeschütz IV

€30.99

Article number: 510000223 Product: 1:35 GER. Sd.Kfz.167 Sturmgeschütz IV The Sturmgeschütz IV was developed on the chassis of the Panzer IV medium tank to provide the German army with an assault gun capable of effectively serving as a tank destroyer in the later stages of World War II. The Stug IV was equipped with a Stuk40 75mm L/48 high-velocity gun installed in a casemate, protected by armored mantlet, capable of penetrating the armor of major enemy armored vehicles. Distributed to units in the early months of 1944, it supplemented and often replaced the Stug III assault gun, which had experienced a sudden decrease in production in 1943 due to increasingly frequent Allied bomber raids on German industrial areas. Widely deployed on the Eastern Front, the Stug IV was also utilized by armored units and anti-tank detachments of the Wehrmacht in Normandy, where its low profile proved to be particularly difficult to identify in the hedgerows of the French countryside.   Warning! Not suitable for children under 14 years.

Military model vehicles 1:35

1:35 German Truck 3to. TYPE S

€26.99

Article number: 510000216 Product: 1/35 German Truck 3to. TYPE S Model Dim.: 17,1 cm Registered by the Wehrmacht under the designation LKW 3,6-36 S 3t Blitz, this truck was the typical example of that practice of unification adopted in 1938 for the construction of civil transport means convertible into military vehicles. Actually, this truck - OPEL without BLITZ - was manufactured for commercial use featuring more or less the same characteristics.

Military model vehicles 1:35

1:35 HEMTT Gun Truck

€41.99

Article number: 510106510 Product: 1:35 HEMTT Gun Truck Model Dim.: 28,0 cm FULLY UPGRADE MOULDS Decals for one version The acronym HEMTT (Heavy Expanded Mobility Tactical Truck) identifies a range eight-wheel drive off-road capable heavy truck, produced from the mid-80s for the United States Army. Thanks to its features, the HEMTT is able to guarantee a great off-road mobility and significant transportation performance. It has become the real "workhorse" of the Army capable of carrying ammunition and equipment in a very effective way. In a lot of conflicts, as in Iraq and Afghanistan, it has been often modified by the field workshops, on the specific requirements of the crews, in order to be more and more effective in the hard operating environments, Furthermore some HEMTT versions have been modified to be used in escort and convoys protection duties. Some additional protections and defensive weapons have been add on.