Reflex 6/14Ch Switch 4 (4x2,5A)

Article number: 500503061
Product: Reflex 6/14Ch Switch 4 (4x2,5A)

The switch modules connect directly to your RC receiver and can be controlled via a button, switch or joystick. The position of the switch/button (up and down) and the duration (long and short) is detected. When using buttons and switches, always ensure that they have a neutral position – a so-called 3-position switch/button (on/off/on). Each switch output features a memory function: This means that it stays activated until the switch/button is moved back to the neutral position. The switch module features four separate NPN outputs. All of them have a 200 mm blue cable, which must be connected to the negative pole of the load. Each switch output can switch a current of up to 2.5 A. The maximum permitted supply voltage is 16 V/DC. The module supplies itself with power via the servo cable. The black negative cable can be directly connected to the battery or a distribution terminal (item no. 500503062, available separately). At high loads, the black cable must be connected to the distribution terminal or the drive battery in order to prevent damage to the receiver.

For easy wiring we recommend:
(It is recommended to tin the cable ends.)
500503062 CARSON Reflex switch 2/4 power distributor

Reflex 6/14Ch Switch 4, 4-fold
Switchmodule, 4x max.2,5A, max.
Switching voltage max.16V/DC=,
1 Ch. 4 add. Function, Manual.

Fitting Power allocator 500903062

Warning! Not suitable for children under 14 years.