RC shock absorbers & damper bridges

1/10 Alu damper 75mm (2)

€15.49

Carson 500405755 - 1/10 aluminum shock absorbers 75 mm (2) are high-quality aluminum shock absorbers for 1/10 scale models. The two-piece set is suitable as a spare part or upgrade, offers robust construction and clear specification (75 mm), ideal for model building enthusiasts who pay attention to original components.

RC shock absorbers & damper bridges

1:10 Alu Oil Damper Set (2) 100mm

€19.49

The Carson 1:10 aluminum oil dampers 500405758 in a 100 mm set (2) provide aluminum shock absorbers for 1:10 scale models and appeal specifically to model building enthusiasts. The oil-filled design and the 100 mm length enable controlled damping behavior and are suitable as a reliable spare part or for fine-tuning the chassis.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

1:10 Alu Oil Damper Set (2) 85mm

€19.49

500405757 - Carson 1:10 Alu-Oil-Damper-Set (2) 85mm is a set of aluminum shock absorbers with 85 mm stroke length for 1:10 scale models. Modeling enthusiasts get oil-damped components as a direct replacement or compact upgrade that provide precise damping and reliable 1/10th scale performance.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

1:10 Alu Oil Damper Set (4) 55mm

€28.49

Carson 500405863 - 1:10 Aluminum Oil Damper Set (4) 55 mm is a high-quality shock absorber set for 1:10 scale. Made of aluminum and damped with oil, the 55 mm long dampers offer precise tuning and reliable control for your model. Ideal for the discerning hobbyist looking for quality and durability.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

1:10 Alu Oil Damper Set (4) 62mm

€28.99

The Carson 500405864 1:10 aluminum oil dampers (4) with 62 mm length are aluminum shock absorbers for 1:10 scale models. The set serves as a high-quality spare part or for upgrading the chassis and is aimed at model builders who are looking for robust, precisely fitting components for a realistic vehicle structure.   Warning! Not suitable for children under 14 years.

Pinions & gears

1:8 BL 13T Steel Pinion Gear hard

€10.79

500906202 - 1:8 BL 13T steel motor pinion (hardened) for M1 main gears impresses model building enthusiasts with its hardened surface, low wear and precise transmission ratio. The pinion fits on 5 mm motor shafts, has two mounting holes (one offset by 120°) and is supplied with two M4 grub screws; installation with medium threadlocker recommended.   Warning! Not suitable for children under 14 years.

Pinions & gears

1:8 BL 15T Steel Pinion Gear hard

€10.79

Carson 1:8 BL 15T Steel Pinion Gear hard (material number 500906204) is a robust motor pinion made of steel, precisely manufactured with 15 teeth and module 0.1 for 5 mm motor shafts. Specially designed for 1:8 models, it offers enthusiasts a resilient, precision-fit solution for reliable drive ratios and a long service life.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Body parts set Akuma green/cyan

€33.99

Carson Akuma body kit 500801039 in 1:8 scale presents itself in bright green/cyan and is the perfect optical and replacement solution for your Akuma model 500409082. The set contains spoilers, stickers and the necessary screws, is designed to fit perfectly and enables quick replacement and individual styling.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Body parts set Akuma pink/gray

€33.99

Carson 500801040 1:8 Akuma body kit in pink/grey is the ideal choice for discerning model builders who want to give their vehicle a striking look. The true-to-scale set contains spoilers, stickers and screws and fits the Akuma model 500409083. High accuracy of fit meets expressive design.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Body-Set KOD Cage Brushless

€34.49

Carson 1:8 scale body set KOD Cage BL (500801027) is the original 1:8 scale body set and the matching spare part for the model 500409064. Model building enthusiasts appreciate the exact compatibility of this body set, which enables the uncomplicated replacement or restoration of the KOD Cage brushless body.

RC chassis & attachments

1:8 Body-Set KOD Cage GP

€34.49

500801028 - Carson 1:8 scale body kit KOD Cage GP is the original 1:8 scale body kit and is offered as a spare part for the 500202021 model. Modeling enthusiasts appreciate the Cage GP for restoring visual integrity and as an authentic replacement solution for damaged bodywork.

Replacement & spares for combustion models

1:8 Clutch-Set

€19.49

The Carson 1:8 Clutch Set 500905710 is a complete clutch upgrade for all 1:8 nitro models and includes clutch, clutch springs, cone and flywheel. Ideal for modeling enthusiasts looking for reliability and precise power transmission; perfect for replacement or performance restoration.

RC chassis & attachments

1:8 Virus-Ex Bodyset blue

€49.99

Carson 1:8 Virus-Ex body set (500801060) in blue offers model builders the body for their 1:8 Virus-Ex. Whether as a replacement in case of damage or for a fresh look - this body set allows you to customize your vehicle and is aimed specifically at enthusiasts who value a matching design for their Virus-Ex.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Virus-Ex Bodyset green

€49.99

1:8 Virus-Ex Bodyset green (item no. 500801061) from Carson gives your 1:8 scale model an eye-catching green body and is aimed at model building enthusiasts who prefer individual styling. The body set sets visual accents, provides a fresh look and is ideal for renewing the appearance of your vehicle.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Virus-Ex Roll cage

€17.49

Carson 1:8 Virus-Ex Roll cage (item number 500801031) is a roll cage specially designed for the 1:8 Virus-Ex that offers model building enthusiasts a striking, scale-oriented look and useful protective function. Its true-to-original design enhances the vehicle, increases its presence and impresses with its attention to detail.   Warning! Not suitable for children under 14 years.

Additional spares

Akuma Alu steering rack

€8.49

Akuma aluminum steering plate 500405990 from Carson is an aluminum steering plate for the Akuma model. This specifically marked component is called the Akuma aluminum steering plate and is aimed at demanding model builders who want to equip their Akuma projects with clearly named components. In short: clear part identification for clear model maintenance.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Akuma Alu-hex hub 17mm

€12.79

The 500405988 Akuma Alu-hex hub 17mm from Carson is a high-quality 17 mm wheel hub for Akuma models and is aimed specifically at model building enthusiasts. The scope of delivery includes a wheel nut, pin and grub screw; compatible with the Akuma articles 500409082 and 500409083. Precisely manufactured, it ensures secure wheel mounting and reliable power transmission.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma battery holder set

€27.99

500405984 Akuma battery holder set from Carson is a compact mounting set for Akuma batteries, supplied with Velcro tape and designed for the batteries 500409082 and 500409083. Model making enthusiasts appreciate the precise integration as an accessory or spare part, the secure fixing of the power source and the practical handling when replacing.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Bodyholder kit

€6.59

Carson Akuma body holder kit 500405983 is a body holder kit for front and rear, intended for the Akuma models 500409082 and 500409083. Model building enthusiasts receive the suitable replacement kit for repairing or replacing the body mountings and thus retain the original equipment of their model.   Warning! Not suitable for children under 14 years.

Additional spares

Akuma chassis stiffener (2) front/rear

€6.49

The Akuma/Virus chassis stiffener (material number 500405987) made of robust plastic, 2 pieces, specifically improves front and rear rigidity. Especially compatible with Akuma 500409082/500409083 and Virus 4.0-4.3, Race and Extreme, it enables more precise steering reactions, greater stability and easy assembly for ambitious model builders.   Warning! Not suitable for children under 14 years.

Wishbones

Akuma front/rear tie-rods kit (4)

€12.79

The Akuma upper wishbone set 500405981 (4 pieces) from Carson is aimed at model builders who want to precisely repair front and rear suspensions. Precisely manufactured for Akuma applications and compatible with the XS models 500404252, 500404253, 500404254 and 500404255, it offers robust spare parts for reliable driving dynamics.   Warning! Not suitable for children under 14 years.

Wishbones

Akuma Lower suspension mount kit

€15.79

Carson Akuma/Virus lower suspension mount kit 500405989 is a front and rear lower suspension mount kit made of silver aluminum and durable plastic. Precisely manufactured and precisely compatible with Akuma 500409082/500409083 and Virus versions 4.0-4.3, Race and Extreme, it offers ambitious model builders a reliable replacement for targeted repairs and suspension fine-tuning.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Akuma Motorholder

€8.49

The 500405986 Akuma motor mount set from Carson is a precise spare part for model builders and is used to securely mount the motor. Designed for Akuma models 500409082 and 500409083, it enables precise restoration or replacement of drive components and is therefore indispensable for maintenance and repair.   Warning! Not suitable for children under 14 years.

Pinions & gears

Akuma Pioniongear 14T

€6.89

500405985 Akuma motor pinion 14 teeth combines precise manufacturing with a robust fit for ambitious model builders. The gearwheel in module 1.0 is supplied complete with grub screw and enables reliable power transmission in Akuma drives. Compatible with the Akuma models 500409082 and 500409083 - ideal for targeted repairs or upgrades.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Akuma shock absorber set (4)

€27.79

Carson Akuma shock absorber set 500405980 - four adjustable shock absorbers (2×100 mm front, 2×130 mm rear) with protective covers for targeted suspension tuning. Precisely manufactured for reliable function and easy installation; model building enthusiasts appreciate the robust design and compatibility with Akuma vehicles 500409082 and 500409083.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Akuma shock tower set (2) front/rear

€21.49

500405982 Carson Akuma shock tower set (2 pieces front and rear) offers suitable spare parts for Akuma models. The set contains shock towers for front and rear axle and is compatible with the Akuma vehicles 500409082 and 500409083. Ideal for targeted repairs and precise spare parts supply.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Akuma steering linkage (2)

€6.49

Carson 500405979 Akuma steering linkage set (left and right) offers the right spare part for the Akuma models 500409082 and 500409083. Model building enthusiasts appreciate the clear assignment to the original parts; the set restores the complete steering connection and ensures controlled steering function.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 10x15x4 (10)

€13.99

500904019 Carson ball bearing 10x15x4 (10) for model building enthusiasts. The insert reduces the frictional resistance so that bearing points run noticeably more smoothly; result: higher speed, lower power consumption and longer running time. Scope of delivery: 10 pieces. Can be used wherever 10x15x4 ball bearings are required.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 3x6x2,5 (10)

€13.99

Carson ball bearings 3x6x2.5 (10) - item no. 500904001 come in a set of 10 and reduce frictional resistance so that all bearing points run noticeably more smoothly. This allows your model to reach higher speeds, consume less power and achieve longer run times, ideal for targeted performance improvements.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 3x7x3 (10)

€13.99

Carson ball bearings 500904002 (3×7×3 mm, 10 pieces) noticeably reduce frictional resistance and allow all bearing points to run more smoothly. For model builders who focus on maximum efficiency, this means higher speed, lower power consumption and longer running times. The scope of delivery includes ten precision-manufactured bearings for easy replacement and reliable performance.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 4x8x3 (10)

€13.99

Carson ball bearings 500904004 - 4x8x3, 10-pack: For model building enthusiasts, these ball bearings offer noticeably reduced frictional resistance. As a result, moving parts run more smoothly, your model reaches higher speeds and achieves longer running times with lower power consumption. Contents: 10 pieces.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 4x9x4 (10)

€13.99

Carson ball bearings 4x9x4 (500904005) in a set of 10 for model builders: They reduce the frictional resistance so that all bearing points run noticeably more smoothly. This leads to higher speeds and longer running times with lower power consumption. Ideal for ambitious model builders who want to increase running smoothness and efficiency.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 5x10x4 (10)

€13.99

Carson ball bearings 500904008 (5×10×4, pack of 10) reduce the frictional resistance at bearing points so that axles and components run noticeably more smoothly. Your model reaches higher speeds, consumes less power and achieves longer run times. Ideal for replacement if you want to increase performance and efficiency.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 5x11x4 (10)

€13.99

The Carson ball bearing 500904009 (5×11×4, 10 pieces) is a precision set for model builders that noticeably reduces friction and makes bearing points run more smoothly. Result: higher top speed, longer running time with lower power consumption. Ideal for upgrading performance and for reliably smooth running of all moving parts.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 5x8x2,5 (10)

€13.99

The Carson ball bearing 500904006 (5x8x2.5 mm, pack of 10) is an essential upgrade for model building enthusiasts: using these ball bearings noticeably reduces frictional resistance, axles run more smoothly, your model achieves higher speeds and longer running times with lower power consumption.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 5x9x3 (10)

€13.99

Carson 500904007 ball bearings 5x9x3 (10) offer model builders precisely manufactured bearings for all relevant bearing points. Their use noticeably reduces frictional resistance, which results in higher speed, lower power consumption and longer running times. The set of 10 is ideal for replacement or retrofitting.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 6x10x2,5 (10) w/o seal

€13.99

500904010 Carson ball bearings 6×10×2.5 (open, without seal) are precision-manufactured bearings for model builders that noticeably reduce frictional resistance. As a result, axles run more smoothly, the model reaches higher speeds and achieves longer running times with lower power consumption. Pack of 10 pieces.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 6x12x4 (10)

€13.99

Carson 500904011 Ball Bearings 6x12x4 (10) are precision manufactured rollers that significantly reduce frictional resistance, resulting in smoother running, higher top speed and lower power consumption. The set contains ten pieces and is ideal for modelers who demand performance, efficiency and longer run times.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 8x12x3,5 (10)

€13.99

Carson ball bearings 500904015 (8x12x3.5) in a pack of 10 are ball bearings whose use reduces frictional resistance and makes all bearing points run noticeably more smoothly. This allows your model to reach higher speeds, consume less power and achieve longer run times - a clear advantage for model builders looking for performance.   Warning! Not suitable for children under 14 years.

Ball bearings

Ball bearing 8x16x5 (10)

€13.99

Ball bearings 8x16x5 (10), item no. 500904017 from Carson, are high-quality precision bearings for model builders. The scope of delivery includes 10 pieces. The use of these ball bearings reduces frictional resistance so that bearing points run noticeably more smoothly; this allows your model to reach higher speeds and achieve longer running times with lower power consumption.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Body kit KOD GP

€31.49

1:8 Body Kit KoD GP 500801026 from Carson offers bodywork, stickers and spoilers and is specially designed for the King of Dirt Nitro 500202020. Model building enthusiasts get a complete replacement and styling kit to restore or customize their 1:8 nitro model. Direct replacement makes it easier to maintain your model.

RC chassis & attachments

Body parts Set Offroad Fighter Cage

€28.99

Carson 500800111 Body kit for the XS Offroad Fighter Cage (1:10) gives your model a striking black/turquoise finish. The scope of delivery includes rear spoiler, stickers and body prints. Specially designed for the XS chassis and compatible with 500404252, 500404253, 500404254 and 500404255.

RC chassis & attachments

Body parts Set Offroad Fighter Cage

€28.99

The Carson body parts set 500800112 for the XS Offroad Fighter Cage features a painted black/red body with rear spoiler as well as stickers and body prints in 1:10 scale. Specially designed for the XS chassis, it fits the 500404252, 500404253, 500404254 and 500404255 models and gives your vehicle a striking, factory finish.

RC chassis & attachments

Body pins 14 mm, 10 pieces, black

€3.79

Carson 500908058 Split pins 14 mm, 10 pieces, black - Replacement split pins with a length of 14 mm in a practical pack of ten for model making. The black version enables the inconspicuous replacement of body attachments and is ideal for quickly replacing damaged pins and completing every enthusiast's stock of spare parts.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Body pins 20 mm, 10 pieces, black

€3.79

500908059 - Carson Body Pins 20 mm (10 pieces, black) are replacement pins with a length of 2 cm and are used as spare parts for the secure attachment of model bodies. For model building enthusiasts, they are a practical addition for reliably fixing body parts. Ideal for repairs, maintenance and quick part changes on the model and reliably fixes bodywork.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Body pins 24 mm, 10 pieces, black

€3.99

Carson split pins 24 mm - 10-pack (500908060) offers black replacement split pins with a length of 24 mm for fastening car bodies. Model building enthusiasts appreciate the clean fit and uncomplicated handling when quickly changing the bodywork; a practical spare part for your model, complete in a set of 10.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Body pins 27 mm, 10 pieces, black

€4.19

Carson 500908062 Body pins 27 mm (10 pieces) in black are practical split pins for model builders who are looking for replacements or supplies. The pack of ten with 27 mm long split pins enables uncomplicated replacement and ensures that important fastenings are quickly ready for use again. Indispensable accessories.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Car Body KoD 2.0 Brushless green

€33.99

500801037 - 1:8 body kit KoD 2.0 Brushless in green from Carson is aimed at model building enthusiasts who want to replace damaged body parts or freshen up the look of their vehicle. As a precisely fitting spare part for the 500409095 model, it ensures a lively 1:8 scale look and reliable restoration of the appearance.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Car Body KoD 2.0 Brushless orange

€33.99

500801036 - 1:8 KoD 2.0 Brushless body kit in orange offers model builders a perfect combination of striking looks and precise function. As an original spare part for the 500409094 model, it provides reliable protection for the technology, is easy to fit and preserves the performance and appearance of your vehicle.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Car Body Virus V21 blue

€33.99

Carson 1:8 body kit Virus V21 (material number 500801038) in blue is the original spare part for the model 500204036 and is aimed at model building enthusiasts who want to give their Virus V21 a fresh, authentic appearance. The set ensures compatibility with the model mentioned.   Warning! Not suitable for children under 14 years.

Ball bearings

CC-01 Ball bearing set (18)

€22.49

Carson 500904029 Ball Bearing Set CC-01 4WD (18 pieces) is the affordable tuning set for the Tamiya Cross Country Chassis CC-01. The 18 included ball bearings reduce friction and wear and thus increase the driving time - ideal for model building enthusiasts who want to optimize their CC-01 efficiently.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

CV10 Power Pipe Set chrome

€37.99

500905070 Carson 1:10 Power Pipe Set chrome - a shiny chrome set for 1:10 scale models that specifically appeals to model building enthusiasts. Designed as a set, it is suitable for replacement and stylistic refinement, adds striking, detailed accents to the rear and bodywork and supports the visual individualization of your model.   Warning! Not suitable for children under 14 years.

Ball bearings

DT03/DT02 Ball Bearing Set (14)

€15.99

Carson ball bearing set 500904031 for DT-03/DT-02 is a complete, 14-piece set of 11×5×4 mm ball bearings that significantly reduces friction on drive shafts and wheels and thus noticeably increases top speed and driving time. Suitable for TAMIYA DT-02/DT-03 chassis, ideal for Neo-Fighter, Racing Fighter, Aqroshot, Super Fighter G, Sand Rover, Street Rover and for upgrading trailers.   Warning! Not suitable for children under 14 years.

Ball bearings

Fighter bearing set DT-01 (10)

€12.29

Carson ball bearing set 500904025 for DT-01/Grasshopper 1&2 - complete ten-piece set for TAMIYA Fighter Buggy and DT-01 chassis. Precise ball bearings reduce friction on drive axles and wheels, increase top speed and running time. Suitable for Grasshopper 1, Grasshopper II, Mad Bull, Mad Fighter, Fighter Buggy and Fighter Buggy GR; ideal for model builders.   Warning! Not suitable for children under 14 years.

Ball bearings

GF-01/WR-02/TL-01 Ball bearing set (24)

€26.49

Carson ball bearing set 500904026 for GF-01, WR-02 and TL-01 provides a complete set of 24 ball bearings, specially designed for the GF-01, WR-02 and TL-01 chassis from TAMIYA. This provides model builders with all the necessary bearings in one package, ideal for replacement, maintenance and the careful rebuilding of bearing points.   Warning! Not suitable for children under 14 years.

RC tires & rims

KOD Alu hex hub 17mm (2)

€13.49

500405896 Carson KoD aluminum wheel hubs 17 mm (2) are high-quality aluminum wheel hubs that combine model-building-oriented robustness and a precise fit. As a set of two suitable for the models 500202020 and 500409063, they ensure a secure hold from the wheel to the drive hub, facilitate repairs, make them indispensable for enthusiasts and increase durability and driving stability.

Additional spares

KOD Alu Servo Horn

€10.99

Carson KOD Alu Servo Horn (500405918) is a robust aluminum servo horn that has been developed as a precise spare part for your KOD model. Finely manufactured, it offers high load capacity and precise power transmission from the servo to the steering. It is a reliable choice for model builders who value durable, precision-fit components.

Additional spares

KOD Alu Steering rack

€7.29

The Carson KOD aluminum steering strut 500405898 is an original aluminum steering part, suitable for the KOD models 500202020 and 500409063. Model building enthusiasts thus receive the exact spare part for replacing or fully equipping the steering and can supplement their models with the appropriate steering component.

Ball bearings

KOD Ball bearing Set

€21.99

KOD ball bearing set (14) 500405916 from Carson is a bearing package for KoD models and contains 14 ball bearings. It is suitable for the 500409063 model and is used to replace or maintain existing assemblies. Model builders appreciate the simple integration into existing designs. The item number 500405916 makes it easy to identify and order the set.

Pinions & gears

KOD Bevelgear/joint cup

€15.90

Carson KoD bevel gear/tappet 500405884 is an original spare part for KoD models. Listed as a KOD bevel gear/joint cup, this part is aimed at model building enthusiasts who are specifically looking for replacement or exchange parts for their KoD models and value components that are available as original parts. The English designation is KoD Bevelgear/joint cup.

Additional spares

KOD BL Alu Motorholder-Set

€45.99

500405907 - Carson's KoD BL aluminum motor mount kit provides precise, lightweight support for your motor; the aluminum kit is precision engineered and specifically designed to fit the 500409063 unit. Modelers appreciate the sturdy mounting and precise fit to optimize performance and reliability.

Additional spares

KOD BL RC-Box/Servomount

€12.79

Carson 500405913 KoD BL RC-Box/Servomount offers a custom-fit receiver and servo mount for King of Dirt brushless models. Model building enthusiasts appreciate the robust bracket for secure mounting of the electronics, which enables precise installation. Ideal for targeted repairs or upgrades and ensures reliable function in use.

Pinions & gears

KOD Center differential 46T

€41.99

Carson KoD center differential 46Z (500405882) is the precise spare part for your KoD model and ensures an exact transmission ratio and balanced power distribution. Model building enthusiasts appreciate the precise fit and the ability to restore the drive behavior true to the original - indispensable for finely tuned performance.

RC chassis & attachments

KoD Chassis brace set / Body -mount

€14.99

500405920 - Carson KoD Chassis brace set / Body-mount: Two-piece KoD Cage body mounts for 1/8th scale models, supplied as a pair and intended as an original spare part for the 500202021 and 500409064 models. Precision manufactured for a snug fit, they ensure a stable body mount and improve handling and reliability - a must for model building enthusiasts.

Pinions & gears

KOD Differential front/rear

€41.99

Carson KoD Differential 500405881 is the original spare part for the front and rear axle of your KoD models. Specially designed for KoD, it enables targeted replacement and ensures that the standard function is restored. Model builders and collectors appreciate the custom-fit solution for maintaining and servicing their vehicles.

RC chassis & attachments

KOD Front bumper

€4.49

Carson King of Dirt front bumper 500405909 complements your KoD model as an original front bumper and combines a brand-accurate fit with an authentic appearance. Enthusiastic model builders appreciate the original spare part quality to maintain the look and function of their King of Dirt. Indispensable for detailed repairs.

RC chassis & attachments

KOD Front Bumper

€12.99

The Carson KoD Front Bumper 500405922 is an original bumper for KoD cages in 1:8 scale and is supplied as a front set (2 pieces). As an exact replacement part for the 500202021 and 500409064 models, it protects the body and chassis, is easy to fit and offers enthusiasts a robust, reliable solution for restoring or upgrading their model.

Axles & drive shafts

KOD Front drive shafts (2)

€28.99

Carson 500405893 KoD front cardan shafts (2) are original king-of-dirt drive shafts for the front axle and offer spare part quality for model builders. The two-piece set ensures reliable power transmission, increased load capacity and faithful restoration of the original driving dynamics. Precisely manufactured for long-lasting use.

Additional spares

KOD Gear housing front/rear

€13.49

Carson KoD transmission housing 500405883 for front and rear is the suitable replacement housing for KoD models. This housing enables precise mounting of the transmission components, ensures exact alignment and reliable protection of the gears. This provides model builders with an important component for professional repair and maintenance.

Wishbones

KOD Hinge pins for arms (4)

€10.49

Carson KoD control arm pins (material no. 500405889) - Set of four pins and matching E-rings, especially for King of Dirt control arms. An essential replacement kit for modelers who value original components; provides the fasteners needed to replace and maintain the control arm assembly.

Wishbones

KOD Lower arms kit front (2)

€10.79

Carson KoD Lower Arms Kit Front (500405900) is a two-piece set with KoD lower front wishbones and is aimed at model builders. As a suitable spare part for King of Dirt models, the set contains the wishbones for the front suspension and is suitable for the targeted replacement or repair of your chassis.

Wishbones

KOD Lower arms kit rear (2)

€10.79

Carson KoD Rear Lower Control Arms 500405888 are the two-piece set of lower control arms for the rear axle of your King of Dirt model. As a custom-fit replacement, they help restore suspension geometry and support precise steering and suspension functions so your model retains its performance and off-road capability.

Wishbones

KOD Lower suspension mount front

€15.49

Carson King of Dirt front wishbone holder 500405887 is an original KoD spare part for the front suspension. Suitable for the FF and FR positions, this wishbone holder is aimed at model building enthusiasts who want to maintain their King of Dirt models and keep them true to the original.

Wishbones

KOD Lower suspension mount rear

€15.49

Carson KoD Lower suspension mount rear 500405885 is a King of Dirt wishbone mount for the rear axle, designed for the RF and RR positions. This original spare part is aimed at model building enthusiasts who value correct part allocation and uncomplicated installation when replacing or repairing parts.

RC shock absorbers & damper bridges

KOD Oil Shocks-kit (4) 110/125mm

€59.99

KoD Oil Shocks-kit (500405914) from Carson takes King of Dirt suspension to a new level with four oil-damped aluminum shocks. The kit includes two 110mm and two 125mm shocks, provides precise damping and improved traction off-road and is aimed at modelers who demand performance and control.

Axles & drive shafts

KOD Rear hub carrier (2)

€12.79

Carson KoD Rear hub carrier 500405902 - rear uprights (2 pieces) for KoD models. This original part is aimed at model building enthusiasts who are looking for precise spare parts for their rear axle. Clearly named, matching components to repair or maintain your KoD vehicle. The original Carson part with this article number makes identification easier when buying a replacement.

Additional spares

KOD Rollcage Set BL

€17.79

Carson 500405919 KoD Rollcage Set BL is a tubular lattice frame for 1:8 KoD models and serves as an original spare part for part number 500409064. Model builders will find a perfectly fitting replacement and original look for repairing or upgrading their vehicle, ideal for maintaining the series appearance.

RC chassis & attachments

KOD Rollcage Set GP

€18.49

Carson KoD Rollcage Set GP (500205996) is a custom-fit tubular frame replacement for 1/8th scale KoD models and is specifically compatible with the 500202021 model. This set replaces the original cage and restores the vehicle structure - ideal for modelers who appreciate authentic repairs and detailed preservation.

RC shock absorbers & damper bridges

KOD Shock towers set front/rear

€38.99

Carson KoD shock tower 500405886 combines front and rear solutions for your KoD chassis: aluminum shock towers, designed for front and rear and directly suitable for the models 500202020 and 500409063. Model builders appreciate the precise fit and direct replacement as a spare part or for upgrading. Ideal for ambitious model builders.

RC shock absorbers & damper bridges

KOD Shok towers set front /real

€37.99

Carson 500405921 KoD Shok Towers Set Front (real) is a spare part for 1:8 KoD cage models: two shock towers, intended for faithful restoration or upgrading. The parts facilitate installation and are compatible with the parts 500202021 and 500409064. Perfect for model builders who are looking for precise spare parts for their 1:8 scale models.

Wishbones

KOD Upper front/rear tie-rod kit (4)

€14.79

500405890 - the KoD Upper front/rear tie-rod kit (4) contains the King of Dirt wishbones for the upper position on the front and rear axle. This four-part kit is aimed at model building enthusiasts who need a complete set to replace or upgrade the upper wishbones on KoD models and carry out specific repairs.

Axles & drive shafts

KOD Upright holder set front (2)

€12.79

Carson King of Dirt front steering knuckle set 500405894 offers model builders a two-piece front axle set with King of Dirt steering knuckles as well as matching bushes and screws. Ideal for repairing or upgrading KoD models, it ensures an exact fit and uncomplicated integration into the front axle.

Axles & drive shafts

KOD Upright set front (2)

€12.79

Carson KoD Upright Set Front 500405895 contains two King of Dirt steering knuckle brackets for the front axle. The spare parts set is aimed at model building enthusiasts who are looking for original components for KoD vehicles. As a front bracket set, it supplements the parts supply for KoD models. Ideal for collectors and active drivers who value preservation and originality.

Ball bearings

M-03/ FF-02 bearing set (14 pcs)

€16.99

Carson 500904024 Ball Bearing Set M-03/FF-02 provides 14 precision ball bearings as a complete replacement for the M03 and FF02 models, replacing the former part number 002176. Modeling enthusiasts appreciate the precision-fit solution to reduce drag and wear; easy installation and long-lasting performance provide reliable precision for repair and maintenance.   Warning! Not suitable for children under 14 years.

Ball bearings

M-06/M-05 Chassis Ball bearing set (18)

€31.99

500904059 Ball Bearing Set M-06/M-05 Chassis (18) from Carson is a complete set of 18 ball bearings, suitable for TAMIYA M-06 (RWD) and M-05 (FWD) chassis. Model builders will find a practical replacement set here for the targeted repair and maintenance of their chassis; ideal for refreshing, replacing individual bearings or for full refurbishment.   Warning! Not suitable for children under 14 years.

Screws

M2 Ball head/Adjuster set (5) Steel

€7.29

Carson 500907587 M2 ball head and socket set (5) made of steel offers model builders precise, robust linkage for the Compact 2-speed manual gearbox (500907266), the 2-speed transfer case (500907265) or custom builds. Suitable for push/threaded rods M2 (thread ball head M2, bore ball socket M2). The set contains 5 ball sockets, 5 ball heads and 5 fixing nuts.

Screws

M3 Ball head/Adjuster set (5) Steel

€7.29

Carson M3 ball head / socket set 500907588 (5) made of steel is the precise upgrade for model building enthusiasts: ideal for setting up steering systems and linkages of all kinds. For M3 push rods and threaded rods; M3 ball head thread, M3 ball socket bore. Scope of delivery: 5 ball sockets, 5 ball heads, 5 fixing nuts.

Ball bearings

MF-01X Ball bearing set (24)

€31.99

500904056 - Ball bearing set MF-01X (24) from Carson supplies the complete set of 24 ball bearings for the all-wheel drive gearbox of the TAMIYA M-Chassis MF-01X. Model building enthusiasts appreciate the precisely fitting replacement solution for thorough maintenance and quick repair, which allows the original smooth running of the chassis to be restored in a targeted manner.   Warning! Not suitable for children under 14 years.

Ball bearings

New ProductCC-02 Chassis Ball bearing Set (22)

€27.99

The Carson ball bearing set 500904063 is a 22-piece replacement set for the TAMIYA CC-02 chassis, ideal for replacing and repairing your chassis. Model building enthusiasts will find all the ball bearing components they need in one package to replace worn bearing points and restore the chassis to running order.

Pinions & gears

Pinion Gear M0,6 steel, 26T

€9.29

500011106 - Carson motor pinion M0.6 made of steel (26 teeth) is a precise and robust spare part for model builders who rely on reliable performance. Suitable for main gear module M0.6 (TAMIYA standard/on-road) and motor shafts 3.17-3.20 mm (540/550). Hardened surface reduces wear; grub screw for fastening is included. Observe notes and gear ratio table.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear M0,6 steel, 27T

€9.29

The Carson motor pinion 500011107 - steel, module M0.6, 27 teeth - offers model builders precise power transmission and a long service life. The hardened surface reduces wear; the pinion is designed for motor shafts 3.17-3.20 mm (motor sizes 540/550) and fits vehicles with M0.6 main gear (TAMIYA standard). Grub screw is included.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear M0,6 steel, 28T

€9.29

Carson motor pinion 500011108 - M0.6, 28 teeth made of hardened steel offers model building enthusiasts precise, durable gearing for the drive. The finely modulated profile ensures precise power transmission and high wear resistance, enables easy replacement of worn pinions and restores reliable engine performance.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear M0,6 steel, 29T

€9.29

500011109 Motor pinion M0.6 (29 teeth) made of steel offers model building enthusiasts precise power transmission and a long service life. The hardened profile reduces wear; suitable for vehicles with main gear module M0.6 (TAMIYA Standard/On-Road) and motor shafts 3.17-3.20 mm (motor size 540/550). Including grub screw.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 13T

€5.59

The motor pinion 500013421, a hardened steel pinion with module 0.6 and 13 teeth, offers model builders precise power transmission for vehicles with M0.6 main gear (TAMIYA standard/on-road). It fits motor shafts 3.17-3.20 mm (size 540/550), is supplied with grub screw and features a hardened surface to reduce wear for reliable performance and easy installation.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 15T

€6.09

500013423 - Motor pinion module 0.6 made of steel (15 teeth) is a robust spare part for TAMIYA standard/on-road models with M0.6 main gear. The hardened gear wheel for 540/550 motors fits shafts 3.17-3.20 mm and is supplied complete with grub screw. High wear resistance and precise power transmission; please refer to the model instructions for information on the gear ratio.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 18T

€6.79

500013426 Motor pinion module 0.6 (18 teeth) made of hardened steel for model builders. Suitable for vehicles with module M0.6 (Tamiya standard/on-road) and motor shafts 3.17-3.20 mm (motors 540/550). Hardened surface reduces wear; grub screw for fastening included. Please observe the notes/ratio table in the manual.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 20T

€7.29

Carson 500013428 motor pinion (module 0.6, steel, 20 teeth) offers model builders precise transmission and high wear resistance. The hardened steel pinion fits vehicles with main gear module M0.6 (TAMIYA Standard/On-Road) and is designed for 540/550 motor shafts from 3.17-3.20 mm; the matching grub screw for fastening is included in the scope of delivery.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 21T

€7.29

The Carson motor pinion 500013429, module 0.6 with 21 teeth, is a precisely manufactured steel pinion including grub screw. It fits vehicles with main gear module M0.6 (TAMIYA Standard/On-Road) and on motor shafts 3.17-3.20 mm (size 540/550). High-quality workmanship for reliable power transmission; check the gear ratio table in your instructions.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 22T

€7.79

500013430 Carson motor pinion M0.6, 22 teeth (steel) is a robust spare part for ambitious model builders. It fits models with gear module M0.6 (TAMIYA standard) and motor shafts 3.17-3.20 mm (540/550). Hardened surface reduces wear; grub screw included. Please refer to the gear ratio table.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 23T

€7.79

Carson Pinion Gear Module 0.6 23T (500013431) is a hardened steel motor pinion and is supplied with grub screw. It fits motor shafts 3.17-3.20 mm (for 540/550 motors) and is compatible with main gears module M0.6 (TAMIYA standard). The hardened surface reduces wear and ensures reliable power transmission.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 24T

€8.49

500013432 Motor pinion M0.6 made of steel (24 teeth) - a precise spare part for model builders who rely on robust drive power. The hardened surface reduces wear. Fits vehicles with M0.6 gear dimension (TAMIYA standard/on-road) and is suitable for motor shafts 3.17-3.20 mm (size 540/550). Grub screw is included; check the gear ratio table for your model.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 25T

€8.59

The Carson motor pinion 500013433 (module 0.6, 25 teeth) is a sturdy steel pinion for model builders. It is suitable for vehicles with main gear module M0.6 (TAMIYA Standard/On-Road) and for motor shafts 3.17-3.20 mm (size 540/550). Hardened surface reduces wear; grub screw is included. Observe notes/ratio table in the instructions.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,8 steel, 13T

€5.99

The motor pinion 500013403 from Carson is a 13-tooth steel pinion in module 0.8 and ensures precise power transmission and high wear resistance. Suitable for vehicles with main gear M0.8 (TAMIYA Off-Road), engines size 540/550 and shafts 3.17-3.20 mm. Hardened surface reduces wear; grub screw included. Please refer to the gear ratio table in the model instructions.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,8 steel, 16T

€6.89

Carson 500013406 Motor pinion, module 0.8, 16 teeth: Made of hardened steel, it offers precise power transmission and high wear resistance for ambitious model builders. The pinion is supplied with grub screw, fits motor shafts 3.17-3.20 mm (motor size 540/550) and vehicles with main gear M0.8 (TAMIYA Off-Road). Please refer to the gear ratio table in the manufacturer's instructions.   Warning! Not suitable for children under 14 years.

Ball bearings

TA-01/01B bearing set (22pcs)

€26.49

Carson ball bearing set TA-01/01B 500904023 is a complete ball bearing set for TA01/TA01B chassis and includes 22 ball bearings. As a perfect replacement for models such as Manta Ray, Dirt Thrasher and Blazing Star, it supports the reliable function of your vehicle during repair and maintenance.   Warning! Not suitable for children under 14 years.

Ball bearings

TT-02 On Road Cha. Ball bearing set (16)

€21.99

Carson 500904055 Ball Bearing Set for the TT-02 On-Road Chassis is a precise 16-piece set that allows modelers to tune their vehicle sensibly and inexpensively. The bearings reduce friction and wear, improve acceleration, top speed and running time and increase driving precision. Only compatible with on-road chassis.   Warning! Not suitable for children under 14 years.

Ball bearings

TT02B/TT01E/TT01 Ball bearing set (16)

€28.49

Ball bearing set 500904054 for Tamiya TT-02B, TT-01E and TT-01 is the 16-piece, affordable tuning upgrade for ambitious model builders. The 12×5×11 mm and 4×8×12 mm ball bearings reduce friction and wear, improve acceleration, top speed and driving time and ensure long-lasting, precise performance.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Virus 4.0 6S Bodyholder Set

€15.99

Carson Virus 4.1/4.0 6S Bodyholder Set (500405759) is a targeted upgrade for modelers and is compatible with Virus versions 4.0, 4.1, 4.2 and 4.3. The set includes body mounts, chassis stiffeners and brackets, providing precision-fit components to securely mount and increase the stability of your vehicle.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 6S Center Drive Shaft

€16.79

The Carson 500405767 Virus/Akuma center drive shafts (2) are tailor-made center shafts for Virus 4.0-4.3 and Race (500409050,500409051,500409060,500409061,500409067,500409068,500409080,500409081,500409086,500409087) as well as Akuma (500409082,500409083). Precisely manufactured, they ensure reliable power transmission, precise replacement and easy installation.   Warning! Not suitable for children under 14 years.

Pinions & gears

Virus 4.0 6S Centerdifferential Cover

€15.99

Carson center differential holder set Virus/Akuma - 500405762 offers a precise replacement for center differentials of Virus models 4.0, 4.1, 4.2, 4.3 and Race (500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086, 500409087) as well as for Akuma 500409082 and 500409083. Precise for targeted replacement during maintenance and repair.

Additional spares

Virus 4.0 6S Side Guard

€15.99

Carson Virus/Akuma side protection 500405766: Side protection left and right, 2 pieces, suitable for Virus 4.0, 4.1, 4.2, 4.3 and Race (500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086, 500409087) as well as Akuma (500409082, 500409083). Ideal for targeted repair and restoration of the original look.

RC chassis & attachments

Virus 4.0 Alu Mount for Chassis Brace

€20.99

Carson 500205969 Virus 4.1/4.0 aluminum bracket for chassis reinforcement is a precisely fitting aluminum component for the Virus models 4.0, 4.1, 4.2 and 4.3. Model building enthusiasts thus receive a durable, precise solution for targeted reinforcement of the chassis; the processing enables simple assembly and ensures noticeably better handling.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Virus 4.0 Alu Shocks-Kit-V/H

€59.99

Carson Virus Alu Shocks-Kit V/H (500205937) is aimed at model building enthusiasts who are looking for suitable shocks for the Virus models 4.0 to 4.3. The set contains two 100 mm and two 130 mm aluminum shock absorbers and is suitable as a direct replacement or upgrade part for the front and rear axle. The designation V/H indicates front and rear axle.   Warning! Not suitable for children under 14 years.

Additional spares

Virus 4.0 Alu-Hex Hub 17mm

€13.49

Carson 500205938 Virus 4... Alu-Hex Hub 17mm is the precisely fitting wheel hub for the Virus models 4.0 to 4.3 and is supplied including wheel nut, M4 grub screw and fixing pins. The aluminum part enables clean installation and secure fixing - an indispensable spare part for demanding model builders.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 Axles rear (2)

€8.49

500205957 Carson Virus/Akuma rear axles (2) are rear wheel axles in a pack of two, suitable for Virus 4.0, 4.1, 4.2, 4.3 and Race as well as for Akuma models. Compatible with part no. 500204031, 500204033, 500204036, 500204040, 500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086, 500409087 as well as 500409082 and 500409083; for replacement.   Warning! Not suitable for children under 14 years.

Pinions & gears

Virus 4.0 Bevelgear Joint Cup

€15.79

Carson 500205925 - Bevel gear and driver for front or rear differential, suitable for Virus 4.0, 4.1, 4.2, 4.3 and Race (500204031, 500204033, 500204036, 500204040, 500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086, 500409087) as well as Akuma (500409082, 500409083). A spare part that maintains the function and original fidelity of your models.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 Centerdiff complete

€41.99

500405592 - Virus/Akuma center diff complete: center differential with steel main gear (46 teeth) as a complete unit. Suitable for Virus 4.0, 4.1, 4.2, 4.3 and Race as well as for Akuma. This provides model builders with an original spare part for precise replacement, overhaul and value-preserving repairs.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Virus 4.0 Clutch-Kit complete

€37.99

500205956 Virus 4.0 Clutch-Kit complete includes clutch, clutch springs, flywheel, cone, clutch bell and ball bearing in a high-quality complete kit for the discerning model builder. Precisely manufactured, the kit guarantees reliable power transmission, uncomplicated installation and a noticeably more harmonious response of the drive. Ideal for maintenance, tuning and replacement.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 Diff front/rear

€41.99

Carson 500205924 Virus/Akuma differential for front or rear is a spare part suitable for Virus 4.0-4.3 and Race (e.g. 500204031, 500204033, 500204036, 500204040, 500409050-500409087) as well as Akuma models 500409082/500409083. Model building enthusiasts will find the specific compatibility for repair and replacement here.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 Dog Bone Center 2pcs

€16.79

Carson 500205940 Virus 4.0 Dog-Bone drive shafts center (2 pieces) are original compatible spare parts for the Virus 4.0 Nitro. Intended as center drive shafts, they allow direct replacement during maintenance or repair and help model building enthusiasts to restore the drive transmission of their Virus 4.0 to its original state.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 Dog Bone Rear (2)

€16.79

Carson 500205947 - Virus/Akuma Dog Bone Rear (2) are precision-manufactured rear drive shafts (2 pieces) that ensure reliable power transmission and stable rear axle function. A perfect fit for Virus 4.0-4.3, Virus Race and the Akuma models 500409082 and 500409083, ideal for quick repairs and long driving pleasure.   Warning! Not suitable for children under 14 years.

Additional spares

Virus 4.0 Front Bumper

€4.39

500205942 Front bumper for Virus and Akuma combines robust protection with a precise fit for repair and tuning. Suitable for Virus 4.0-4.3 and Race versions (500204031, 500204033, 500204036, 500204040, 500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086, 500409087) and Akuma 500409082/500409083.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 Front Drive Shafts (2)

€29.99

Carson 500205946 Virus/Akuma front drive universal joints (2) are robust precision shafts for the front drives. Specially manufactured for Virus 4.0-4.3 and Race versions as well as Akuma, they ensure precise power transmission, easy installation and increased load capacity - ideal for ambitious model builders who want to optimize driving feel and reliability.   Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Front Toe in Plate

€20.99

500205971 Aluminum front wishbone holder for Virus and Akuma is a precisely manufactured aluminum spare part, especially suitable for Virus 4.0, 4.1, 4.2, 4.3 as well as the Race and Extreme versions and compatible with Akuma parts 500409082 and 500409083. Model building enthusiasts appreciate the precisely fitting solution for targeted replacement or upgrade.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Virus 4.0 Fuel Tank

€14.99

Carson 500205962 Virus 4.0 Fuel Tank is the Carson fuel tank designed for the 1/8 VIRUS 4.0. Model building enthusiasts who value original components will find a clear spare parts solution here to maintain the equipment of their Virus 4.0 and reliably continue the operation of their model; ideal for collectors and active drivers.   Warning! Not suitable for children under 14 years.

Additional spares

Virus 4.0 Gear Housing

€12.79

Gearbox housing Virus/Akuma 500205939 - robust spare part for front or rear axle, designed for model builders who value precise function. Suitable for Virus 4.0, 4.1, 4.2, 4.3 and Race as well as Akuma; compatible with 500204031, 500204033, 500204036, 500204040, 500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086, 500409087, 500409082 and 500409083. Precise fit for easy installation and long-lasting function.   Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Hinge Pins f. Arms

€10.99

500405619 Virus/Akuma wishbone pins for arms: Set of six wishbone pins and eight E-rings, manufactured for precise axle guidance and secure connection. Compatible with Virus 4.0-4.3, Race and Akuma models (including 500409050, 500409051, 500409060-500409061, 500409080-500409083). Ideal for quick repairs and reliable performance.   Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Lower Arms Kit front

€10.79

Carson 500205949 - lower front wishbones for Virus and Akuma are specific spare parts for the front suspension; compatible with Virus 4.0, 4.1, 4.2, 4.3 and Virus Race (500204031, 500204033, 500204036, 500204040, 500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086, 500409087) as well as Akuma 500409082 and 500409083, ideal for specific repair and precise renewal of the front suspension - perfect for model building enthusiasts.   Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Lower Arms Kit rear (2)

€10.79

Carson 500205958 Virus/Akuma rear lower wishbone - set (2 pieces). Precisely fitting replacement for Virus 4.0, 4.1, 4.2, 4.3 and Race as well as for Akuma models. Model building enthusiasts appreciate the precise fit for quick repair, easy installation and targeted restoration of rear axle function.   Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Lower Arms Support

€4.29

Carson Virus/Akuma Lower Arms Support 500205927 is an original spare part for the lower wishbone mount of all Virus models. Compatible with 500409024, 500409055, 500409061, 500409072, 500204031 and 500204033, it allows targeted replacement, repair and maintenance of near-standard functionality. Ideal for enthusiasts.   Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Lower Suspension Mount-Kit 2pc

€15.99

500205941 Virus/Akuma Lower wishbone bracket kit combines red aluminum elements with robust plastic parts and replaces the lower brackets at the front and rear. Specially designed for Virus 4.0 to 4.3 as well as Race and Extreme, also compatible with Akuma models 500409082 and 500409083. Precise fit for safe handling.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 Middle Diff complete

€41.99

Carson Virus 4... Middle Diff complete (Art.-No. 500205921) offers model building enthusiasts a complete center differential including main gear for Virus 4.0 to 4.3. This spare part ensures precise power transmission and reliable performance, ideal for repairing or specifically upgrading your Virus chassis.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Virus 4.0 Pivot-Ball Set

€14.49

500205961 Virus/Akuma Pivot Ball Set is an original pivot ball set for the front axle and indispensable for demanding model builders when replacing on Virus 4.0-4.3, Virus Race and Akuma. The set replaces worn ball sockets, restores the steering function and is compatible with the above model numbers.   Warning! Not suitable for children under 14 years.

Additional spares

Virus 4.0 RC-Box Servomount

€22.49

500405591 Virus/Akuma RC box servo mount from Carson combines the RC box and servo mount into a perfectly fitting spare part for clean, secure installation. Suitable for Virus 4.0-4.3 and Race (500409050,500409051,500409060,500409061,500409067,500409068,500409080,500409081,500409086,500409087) and Akuma (500409082,500409083).

Wishbones

Virus 4.0 Real Toe in Plate 2 Degree

€24.99

Carson Virus/Akuma Real Toe In Plate 2.5° (500205972) is an aluminum wishbone mount for the rear axle with 2.5° toe-in, developed for Virus 4.0-4.3, Virus Race and Extreme as well as Akuma 500409082 and 500409083. The robust design offers precise geometry and high reliability for setup fine-tuning.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 Rear Hub Carrier

€12.79

500205950 Virus/Akuma Rear Hub Carrier - rear uprights in a set of 2 from Carson, compatible with Virus 4.0, 4.1, 4.2, 4.3 and Race (500204031, 500204033, 500204036, 500204040, 500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086, 500409087) and Akuma (500409082, 500409083). For targeted exchange on the models mentioned.   Warning! Not suitable for children under 14 years.

Screws

Virus 4.0 Screw Kit

€49.99

Carson Virus 4.0 screw set (500205932) is the original replacement and assembly material for the nitro version of the Virus 4.0. The set enables precise repairs and maintenance, ensures secure fastening of critical components and is an indispensable accessory for model builders who value reliability and fast repairs.   Warning! Not suitable for children under 14 years.

Screws

Virus 4.0 Screw Set

€49.99

The screw set 500405589 for Virus and Akuma is aimed at model building fans who value reliable connecting elements. It is specially designed for Virus 4.0-4.3 and Race versions (part numbers 500409050-500409087) and Akuma (500409082/500409083) and enables precise replacement, robust assembly and long-term operational reliability. Ideal for maintenance, repair and targeted tuning.   Warning! Not suitable for children under 14 years.

Additional spares

Virus 4.0 Servosaver-Unit

€22.99

500205943 Carson Virus/Akuma servo saver unit is the right replacement unit for all Virus models and compatible with Virus 4.0, 4.1, 4.2, 4.3 and Race (500204031, 500204033, 500204036, 500204040, 500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086, 500409087) and Akuma (500409082, 500409083) - the spare part that model builders rely on.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Virus 4.0 Shock Towers front/rear (2)

€37.99

500205948 Virus 4.0-4.3 front and rear shock towers are a precise spare parts set (2 pieces) for sophisticated Virus models. Ideal for model building enthusiasts, it ensures precise fitting and reliable mounting of the shock absorbers. Robustly designed, it allows easy repair or replacement to restore suspension function.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 Steering -Link

€6.49

Carson Virus/Akuma steering linkage 500405588 is a precise steering component for model building enthusiasts. Specially manufactured for Virus 4.0-4.3, the Race variants and Akuma models, it ensures precise steering, easy installation and reliable repair or targeted upgrading of the chassis. Ideal for quick repairs and precise retrofitting.   Warning! Not suitable for children under 14 years.

Additional spares

Virus 4.0 Steering Linkage 2

€9.99

Carson Virus 4... Steering Linkage 2 (500205929) are tie rods with ball head for the Virus models 4.0, 4.1, 4.2 and 4.3. As an original spare part, they provide a precise fit for the steering system and enable model building enthusiasts to restore or maintain their Virus chassis - reliably and precisely.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus 4.0 Steering Set 2 pcs.

€12.79

Carson Virus 4 steering levers 500205928: This 2-piece steering set provides accurately fitting replacement steering levers for the Virus models 4.0, 4.1, 4.2 and 4.3. Intended for model building enthusiasts, the parts allow easy replacement for repair and maintain the original correct steering function. Original spare part from Carson, ideal as a replacement for maintenance or repair.   Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0 Upper front/rear Tie Rod Kid 4

€14.79

Carson 500205945 - upper wishbones for Virus 4... (front and rear). This original spare part fits Virus 4.0, 4.1, 4.2 and 4.3 and offers model building enthusiasts a custom-fit solution for repair or replacement. This allows the original suspension geometry to be restored and ensures reliable performance.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Virus 4.0 Wing Mount Posts

€16.89

500205936 Spoiler bracket set from Carson for Virus and Akuma: Suitable for Virus 4.0, 4.1, 4.2, 4.3 and Race (500204031, 500204033, 500204036, 500204040, 500409050, 500409051, 500409060, 500409061, 500409067, 500409068, 500409080, 500409081, 500409086, 500409087) as well as for Akuma (500409082, 500409083).   Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0/4.1 Front Sway Bar Kit

€13.79

500205963 Carson Virus 4.1/4.0 front stabilizer set offers model builders a precisely fitting replacement and upgrade part for the Virus series. The set is compatible with Virus 4.0, 4.1, 4.2 and 4.3 and enables a targeted adjustment of the front axle during repair or fine tuning - robustly manufactured for long-lasting reliability.   Warning! Not suitable for children under 14 years.

Wishbones

Virus 4.0/4.1 Rear Sway Bar Kit

€13.79

Virus 4.1/4.0 rear stabilizer set (500205964) is a special spare part for the Virus models 4.0, 4.1, 4.2 and 4.3. The set supplements the rear axle and enables model building enthusiasts to replace or adapt their vehicles in line with the original. Ideal for collectors and service work.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Virus 4.1 Body Set

€39.99

The 500801020 1:8 Virus 4... Body Set Brushless brings bodywork, decals and spoiler in one package and gives your Virus 4.1 a new look. Suitable for the models 500409060 and 500409061 and generally for all Virus 4... electric models in 1:8 scale, ideal for replacement or optical upgrade.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Virus Race 4.3 Kar. set : 500409086 purple

€36.99

500801032: Carson Body-Set Virus Race 4.3 Brushless in purple combines bodywork and spoiler as a stylish, perfectly fitting complete solution for enthusiasts. Specially adapted to the Virus 4.3 Race models, including the articles 500409086 and 500409087, it enables quick visual enhancement and easy installation with an original fit.

RC chassis & attachments

Virus Race 4.3 Kar. set : 500409087 white

€36.99

Carson Body-Set Virus Race 4.3 Brushless 500801033 in white combines body and spoiler as a perfect replacement or upgrade for your Virus 4.3 Race models. Specially designed for the variants 500409086 and 500409087, it fits all Virus 4... Race versions and gives the model a clear, racing finish.

Pinions & gears

Virus Rocket 120 Diff front / rear

€49.99

500405866 Carson Virus Rocket 120 Differential (front/rear) is a robust spare part with a metal housing that offers precise power distribution and increased durability. Specially designed for the Virus Rocket 120, it also fits other Virus models - only the VIRUS truggy is excluded. Ideal for precise repair and performance optimization.

Pinions & gears

Virus Rocket 120 middle diff

€53.99

500405867 Virus Rocket 120 center differential with metal housing is a suitable spare part for the Virus Rocket 120. The center differential with metal housing is designed for installation in the Virus Rocket 120 and also fits all other CARSON Virus electric models, except the VIRUS Truggy; ideal for targeted repairs and parts retrofitting.

RC shock absorbers & damper bridges

Virus-Ex Alushocks-kit v/h 110/125mm

€59.99

Carson Virus-Ex Alushocks-Kit v/h 110/125mm (500405946) is a four-piece shock absorber set made of aluminum and replaces the standard shock absorbers of the Virus Extreme models 500409074 and 500409084. Model building enthusiasts appreciate the robust design and precise manufacturing to restore the chassis function and reliability of their model true to the original.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus-Ex Axles rear (2)

€8.49

Carson Virus-Ex rear axles 500405957 (2) are original replacement axles for the Virus-Ex model and are aimed specifically at model building enthusiasts who value the precise replacement or restoration of the rear axle. The double pack contains two axles and is suitable for supplementing your spare parts stock or for targeted repair work.   Warning! Not suitable for children under 14 years.

Pinions & gears

Virus-Ex Bevelgear / joint cup

€15.79

Carson Virus-Ex bevel gear/drive 500405945 presents itself as a precise spare part for your Virus Extreme models and combines robust function with a precise fit. Specially matched to the vehicles with the part numbers 500409074 and 500409084, it enables reliable restoration of the drive function and facilitates repair and replacement.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus-Ex Center drive shaft

€16.79

Carson 500405961 Virus-Ex Center drive shaft is the original drive part for your Virus-Ex model and is aimed specifically at demanding model builders. As an intended replacement part, it ensures reliable, central power transmission with a precise fit and robust workmanship to maintain functionality and handling.   Warning! Not suitable for children under 14 years.

Pinions & gears

Virus-Ex Centerdiff. complete

€40.99

Carson 500405962 Virus-Ex Centerdiff. complete is the complete center differential for Virus-Ex models and is aimed at model building enthusiasts who need a complete component for replacement or repair. This complete differential makes it easy to replace defective units in your vehicle.   Warning! Not suitable for children under 14 years.

Additional spares

Virus-Ex Chassis

€65.99

Carson Virus-Ex Chassis (item number 500405959) is a chassis for model builders and is part of the Carson range in the Models & Accessories section. As a component specifically designed for model building enthusiasts, it is suitable for use in construction, as a spare part or for individual conversions. It complements the Carson range for model making and facilitates specific projects.   Warning! Not suitable for children under 14 years.

Pinions & gears

Virus-Ex Diff f/r complete

€40.99

Carson Virus-Ex Differential 500405942 (v/h) is the original spare part from Carson for the Virus Extreme and is compatible with model numbers 500409074 and 500409084. Model building enthusiasts receive a precisely fitting differential for the front and rear axle as a direct replacement for the targeted repair and restoration of the functionality of their model.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus-Ex Doge Bone rear (2)

€16.79

Carson 500405952 - Virus-Ex Doge Bone rear (2) is a two-piece original spare parts set consisting of two dog bones for the rear axle of the Virus-Ex. Precisely manufactured for exact replacement, the parts offer reliable functionality for repairs or upgrades. A must for model builders who value original accessories and quality.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Virus-Ex Front bumper set

€14.99

Carson Virus-Ex Front bumper Set 500405944 is a suitable spare part for the Virus Extreme and is aimed at model building enthusiasts. The V-Ex front bumper set is explicitly compatible with the models 500409074 and 500409084 and enables the exact restoration of the front of the vehicle so that the standard look and function are retained.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus-Ex Front drive shafts (2)

€28.99

Carson Virus-Ex front drive shafts 500405950, two pieces, are replacement axles for the front drive side of your Virus-Ex. Model building enthusiasts appreciate the custom-fit solution for repairs or upgrades, as they ensure reliable power transmission and restore the functionality of the model.   Warning! Not suitable for children under 14 years.

Wishbones

Virus-Ex Lower Arms Kit front (2)

€10.69

500405955 Virus-Ex front control arm kit (2) from Carson is aimed at model builders who are looking for original spare parts for the front suspension of their Virus-Ex. The set contains two front suspension arms and is labeled as a specific consumable part for the Virus-Ex series. Precise designation and brand origin facilitate the selection of suitable components.   Warning! Not suitable for children under 14 years.

Wishbones

Virus-Ex Lower arms kit rear (2)

€10.99

500405954 Carson Virus-Ex Lower Arms Kit Rear (2) is the original, two-piece spare part for the rear wishbone position of your Virus-Ex. The set is aimed at model builders who want to replace damaged wishbones or make specific adjustments and offers precisely fitting accessories for repair and maintenance.   Warning! Not suitable for children under 14 years.

Screws

Virus-Ex Screw-Set

€26.99

Carson Virus-Ex screw set 500405958 supplements the spare parts program for your Virus-Ex model and is intended as a screw set for targeted maintenance and repair. It helps to restore functionality and supports operational safety. Model building enthusiasts appreciate the precise fit in Carson vehicles and easy integration into the model.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Virus-Ex Shock towers front/rear (2)

€37.49

Carson Virus-Ex Shock Towers (material number 500405953), set of 2 parts for front and rear axle. This original spare part is aimed at model builders who are looking for precisely fitting components for their Virus-Ex and value original Carson parts. Perfect for replacing or restoring the shock absorber mounts.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus-Ex Steering linkage (2)

€9.79

Carson Virus-Ex steering linkage 500405951 - 2 pieces for precise and safe steering movements on your Virus-Ex model. The steering links provide precise functionality when replacing damaged parts and restore steering control and reliability. Ideal for modelers who value performance and durability.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus-Ex Steering Set (2)

€12.69

Carson Virus-Ex steering lever set 500405949 (2) provides two front steering levers for the Virus-Ex model and serves as an original spare part for restoring the steering function. Model building enthusiasts who value true-to-original repairs will find the right component here to make their vehicle ready for use again.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Virus-Ex Steering-link

€6.39

Carson 500405956 Virus-Ex Steering-link is the steering component for your Virus-Ex model and is aimed at passionate model builders who value precise control. This spare part is used for the targeted replacement of damaged steering components, reliably restores the steering function and helps to ensure the maneuverability and operational readiness of your model in the long term.   Warning! Not suitable for children under 14 years.

Wishbones

Virus-Ex Upper front/rear tie rod(4)

€14.69

The Carson Virus-Ex wishbone set 500405948 (4 pieces, upper) is a suitable spare part for the Virus Extreme models 500409074 and 500409084. Specially designed for upper front and rear wishbones, it enables quick replacement of damaged parts and thus ensures reliable continued operation of your model.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

X-Crawlee PRO 4WD- Steeringkit

€17.79

500405649 X-Crawlee PRO 4WD steering set from Carson enables the conversion to 4WD steering of the X-Crawlee and is compatible with the vehicles 1:10 X-Crawlee Pro 2.0 (500404214), X-Crawlee XL Beetle (500404169), X-Crawlee XL (500404067) and X-Crawlee XL green (500404068). The set also requires the servo 500502046.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

X-Crawlee pro Linkage Set (10)

€36.49

X-Crawlee Pro linkage set 500405598 (10-piece) from Carson is a precise replacement and upgrade kit for X-Crawlee Pro models. The ten linkages enable precise replacement so that steering functions and driving behavior are quickly restored. Ideal for model building enthusiasts who value precision and reliability.   Warning! Not suitable for children under 14 years.

Pinions & gears

X-Crawlee pro Maingear Slipperclutch

€15.99

The Carson X-Crawlee Pro Maingear Slipperclutch 500405615 is the main gear with integrated slipper clutch for X-Crawlee Pro models. For model building enthusiasts, this means a targeted combination of robust drive component and controllable slip, which protects sensitive components and makes driving behavior finely tunable.   Warning! Not suitable for children under 14 years.

Pinions & gears

X10 Main Gear Buggy 80T

€4.49

Carson X10 main gear 500405752 with 80 teeth for buggy - the concise spare part for model fans. Specially designed for the X10 system and compatible with the 500405361 model, it is suitable for targeted repairs or refreshing your drive. Reliable replacement, ideal for demanding hobbyists.   Warning! Not suitable for children under 14 years.

Pinions & gears

X10E Desert W.Main Gear Set

€22.99

Carson X10E Desert W. Main gear set 500405495 is the matching main gear set for the X10ET-XL center differential as well as the Desert Warrior models Desert Warrior, Desert Warrior 2.0 and Desert Warrior 3.0. Model builders will find a specific replacement and upgrade solution here to restore the drive ratio of their vehicles to an exact fit.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

X10E Dessert W. 4x Front Shock Set

€54.99

X10E Dessert W. 4x Front Shock Set - 500405485: The aluminum front shock absorbers from Carson come as a four-piece set and offer precise damping for X10E/X10ET models. Robustly manufactured, they increase driving stability and control, are easy to fit and are ideal for reliable repairs or upgrades.   Warning! Not suitable for children under 14 years.

Ball bearings

X10EB Ball Bearing Set

€26.99

Carson X10EB ball bearing set 500405357 is aimed at model building enthusiasts and contains a 22-piece assortment of ball bearings. Ideal for targeted replacement and maintenance, the set offers compact spare parts for equipping and repairing your models and impresses with its complete composition.   Warning! Not suitable for children under 14 years.

Pinions & gears

X10EB Differential complete, rear

€28.99

Carson X10EB rear differential complete (500405363) is the original spare part for the rear axle of the X10EB and includes differential and bevel pinion. Modelers appreciate the complete unit that restores lost drive function, precisely secures the transmission ratio at the rear and thus preserves handling and reliability.   Warning! Not suitable for children under 14 years.

Additional spares

X10EB Dirtw.Sp. Slipper Clutch Set Gear

€16.99

500405574 - Carson X10EB Master Gear and Slipper Clutch Set for Dirt Warrior Sport and Dirt Warrior Sport 2.0 combines precision-fit replacement part quality with reliable drive function. The set is designed to restore power transmission and protect the gearbox, offers long-lasting performance and is an essential upgrade for ambitious modelers.   Warning! Not suitable for children under 14 years.

Wishbones

X10EB Front Lower Suspension Holder

€12.49

Carson X10EB front lower wishbone bracket 500405344 is the original spare part for model builders who want to precisely repair their X10EB front axle. As a precisely fitting front lower control arm, it replaces damaged parts and allows near-series restoration and reliable maintenance - ideal for repair and detail-conscious model maintenance.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

X10EB Full Turnbuckle Set, 7 pcs

€12.99

Carson X10EB Full Turnbuckle Set 500405347 is a 7-piece linkage set for models and accessories. Model building enthusiasts will find a complete set of connecting rods for replacement or retrofitting. Compact, complete and ideal for quick repairs and fine-tuning on the model.   Warning! Not suitable for children under 14 years.

Wishbones

X10EB Lower Suspension Arm + Holder f/r

€16.99

The Carson X10EB wishbone and bracket 500405351 for front and rear is the original spare parts set for X10EB chassis and provides the correct basis for the axle guide. Modeling enthusiasts appreciate the precise compatibility with the X10EB chassis; ideal for repair, replacement and the exact restoration of the chassis geometry.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

X10EB Rear Dogbone + Drive Cup (2)

€15.49

Carson X10EB Rear Drive Shafts 500405447 - Rear Dogbone and Drive Cup (2) are original spare parts for the rear axle of your X10EB model. Designed for the specific replacement of defective drive shafts, they are aimed at model building enthusiasts who want reliable components to repair or restore their X10EB.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

X10EB Shock Tower Gearbox + Parts

€16.99

The Carson 500405346 X10EB shock towers and gearbox housings are custom-fit replacement and upgrade parts for your X10EB model. Model building enthusiasts will find suitable components to restore or optimize the chassis and transmission in a targeted manner, while relying on original compatibility and maintaining the vehicle.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

X10EB Shock-Set f/r, 4 pcs

€45.99

Carson X10EB shock absorber set 500405342 made of aluminum, 4 pieces. Model building enthusiasts who want to optimize their X10EB get a high-quality solution for improved handling and increased robustness with these aluminium shock absorbers. Precisely manufactured and specially developed for use in the X10EB, they ensure even damping.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

X10EB Steering Block, front

€20.99

Carson X10EB Steering Block front (500405354) includes the steering knuckles and brackets for the front axle, left and right. For model building enthusiasts, these spare parts are ideal for targeted repair or replacement of the front axle; clear designation facilitates parts allocation and quick replacement in the X10EB range.   Warning! Not suitable for children under 14 years.

Additional spares

X10EB Steering Unit Servosaver

€19.79

Carson X10EB Servo Saver (500405678) is the complete servo saver unit for the X10EB-2WD steering system. This genuine Carson spare part is aimed at modeling enthusiasts and offers a complete replacement solution for the steering of the X10EB-2WD. Ideally suited for maintenance, repair and as a replacement component.   Warning! Not suitable for children under 14 years.

Wishbones

X10EB Suspensionarmset + Holder

€17.79

X10EB Suspension Arm Set + Holder 500405669 from Carson is the set tailored for the X10EB-2WD with wishbones and holders for the lower, front and rear suspension points. Model building enthusiasts thus receive a suitable spare parts package for the targeted replacement and restoration of the function of their X10EB-2WD.   Warning! Not suitable for children under 14 years.

Wishbones

X10EB Turnbuckle Holder f/r (4)

€11.99

500405353 Carson X10EB wishbone brackets (4) form a targeted replacement set for demanding model builders who want to precisely repair their X10EB chassis. The four brackets are designed for the front and rear upper wishbones and allow precise replacement and exact restoration of the axle geometry during servicing.   Warning! Not suitable for children under 14 years.

Pinions & gears

X10ET Rock Warrior Pinion Gear 21T

€6.49

Carson X10ET Rock Warrior motor pinion 21 teeth (500405423) is the original 21-tooth pinion for the X10ET Rock Warrior series. As a precisely fitting spare part, it facilitates quick replacement during repair and maintenance, is aimed at model building enthusiasts and ensures precise drive ratios in use.   Warning! Not suitable for children under 14 years.

Wishbones

X10ET Rock Warrior Suspension arm+hold.

€22.49

Carson 500405420 X10ET-XL lower control arm and bracket set is aimed at model builders who need spare parts for Climb Warrior, Desert Warrior and Rock Warrior. The set includes the lower control arms and associated brackets for the X10ET-XL chassis and is intended for precise replacement and specific repairs to the chassis.   Warning! Not suitable for children under 14 years.

Ball bearings

XS Bearing set

€18.29

Carson ball bearing set 500405935 (15-piece) for the 1:10 XS chassis: Suitable for the models 500404252, 500404253, 500404254 and 500404255. The complete bearing set is used for targeted replacement on the XS chassis and appeals to model builders who want precise spare parts and careful maintenance.

RC shock absorbers & damper bridges

XS Bumper, Wingholder, gear box f+r

€17.79

Carson 500405923: XS front and rear bumpers, spoiler bracket and two-piece gearbox box in one unit. This spare parts set is designed for the 1:10 XS chassis and fits the Stadium Fighter blue (500404252), Stadium Fighter orange (500404253), Offroad Fighter Cage turquoise (500404254) and red (500404255) models. This provides model builders with a true-to-original solution for repairing and upgrading their vehicle.

Additional spares

XS Chassis with shaft cover

€20.99

Carson XS cage chassis 500405930 with propshaft cover for 1:10 XS chassis combines cage shell and cover for the propshaft and is compatible with the models 500404252 (Stadium Fighter blue), 500404253 (Stadium Fighter orange), 500404254 (Offroad Fighter Cage turquoise) and 500404255 (Offroad Fighter Cage red). Perfect fit for the 1:10 XS series, ideal for model building enthusiasts.

Pinions & gears

XS Differential front/rear complete

€13.49

Carson XS differential 500405940, pre-assembled for front or rear axle, offers model building enthusiasts a ready-to-use solution for 1:10 XS chassis. Compatible with the 500404252, 500404253, 500404254 and 500404255 models, it offers precision manufacturing, reliable power distribution and restored driving precision - ideal for maintaining the performance and reliability of your model.

Axles & drive shafts

XS Dog bone rear (2)

€17.79

Carson XS rear drive bones 500405937 combine precision and robustness for demanding model builders: The set contains two drive bones and two wheel axles for the rear axle of the 1:10 XS chassis. Compatible with the models 500404252, 500404253, 500404254 and 500404255, they facilitate repair and performance restoration.

Axles & drive shafts

XS Front drive shafts (2)

€17.79

The Carson XS cardan shafts 500405936 for the front axle (2) are robust spare parts for 1:10 scale models. They fit the XS chassis of the Stadium Fighter blue/orange (500404252/500404253) and Offroad Fighter Cage turquoise/red (500404254/500404255). Precisely manufactured, they enable quick installation, reliable power transmission and greater driving stability - ideal for repairs or upgrades.

Wishbones

XS Lower arms kit front (2)

€13.49

Carson XS front wishbone set (500405924) provides the complete replacement kit for the front axle on a scale of 1:10: two wishbones, a wishbone holder and two long and two short shafts. Suitable for the XS chassis and suitable for the models 500404252, 500404253, 500404254 and 500404255, ideal for model builders.

Wishbones

XS Lower arms kit rear (2)

€13.49

XS wishbone kit for the rear axle (500405925) brings new stability to every 1:10 XS chassis: It contains two wishbones, a wishbone holder as well as two long and two short shafts and is designed precisely for the rear axle. Suitable for 500404252 Stadium Fighter blue, 500404253 Stadium Fighter orange, 500404254 Offroad Fighter Cage turquoise and 500404255 Offroad Fighter Cage red.

Wishbones

XS Lower arms kit rear (4)

€15.49

Carson XS Upper arms Kit (4) 500405929 is a complete wishbone and tie rod set for 1/10th scale XS chassis. It includes two front upper wishbones, two rear upper wishbones and two tie rods for steering and fits the models 500404252, 500404253, 500404254 and 500404255. For model building enthusiasts it offers precise fit, robust workmanship and uncomplicated assembly.

Pinions & gears

XS Main gear set

€19.99

500405939 Carson XS gear set combines the center cardan shaft, two bevel pinions and the main gear in one replacement set for the 1:10 XS chassis. Designed for the models 500404252, 500404253, 500404254 and 500404255, the set offers model builders a perfectly fitting solution that is easy to integrate and a pleasure to replace.

Additional spares

XS Motor mount and holder

€7.79

500405933 - XS engine mount and aluminum mounting plate from Carson combines targeted functionality for the 1:10 XS chassis. The component is used to mount the engine and is suitable for the models 500404252 Stadium Fighter blue, 500404253 Stadium Fighter orange, 500404254 Offroad Fighter Cage turquoise and 500404255 Offroad Fighter Cage red, ideal for model builders looking for a perfectly fitting original spare part.

RC chassis & attachments

XS Motorcov., Batt.-hold, Wheelie-Wh

€13.49

Carson 500405931 Motor and chassis cover including battery holder, two body mounts and wheelie bar for the 1:10 XS chassis. Suitable for Stadium Fighter blue (500404252), Stadium Fighter orange (500404253), Offroad Fighter Cage turquoise (500404254) and Offroad Fighter Cage red (500404255), this set offers specific spare parts for repairing and upgrading your model.

RC shock absorbers & damper bridges

XS Oil Shocks-kit (4) 82mm

€13.49

500405938 Carson XS Shock Absorber Set 82 mm (4) offers four plastic shock absorbers with springs for the 1:10 XS chassis. Compatible with Stadium Fighter blue 500404252, Stadium Fighter orange 500404253 and Offroad Fighter Cage turquoise 500404254 and red 500404255. Ideal for model builders looking for suitable spare parts.

Pinions & gears

XS Pinion gear 21T

€5.99

Carson motor pinion 500405934 - 21 teeth made of steel, module M0.5 (48dB) - a precisely manufactured replacement pinion for 1:10 XS chassis. Includes M3 grub screw for reliable power transmission and quick installation. Ideal for model building enthusiasts: compatible with Stadium Fighter blue (500404252), Stadium Fighter orange (500404253) and Offroad Fighter Cage turquoise (500404254) and red (500404255).

Axles & drive shafts

XS Rear hub carrier (2)

€6.89

Carson XS steering knuckles 500405927 (2) form the rear axle mount for the 1:10 XS chassis and fit the Stadium Fighter blue (500404252), Stadium Fighter orange (500404253) and Offroad Fighter Cage turquoise (500404254) and red (500404255) models. Model building enthusiasts appreciate the precise fit for targeted replacement at the rear.

Axles & drive shafts

XS Servo Saver set, steering plate, post

€13.49

Carson XS servo saver set 500405932 combines servo saver, steering plate and two steering levers as original spare parts for 1:10 XS chassis. Specially designed for the models 500404252, 500404253, 500404254 and 500404255, it offers model building enthusiasts a custom-fit solution for quick repairs or targeted upgrades to the steering system.

Pinions & gears

XS Spur gear

€6.89

The Carson XS main gear 500405941 for 1:10 XS chassis is a steel main gear M0.5 (48dB) and ensures precise power transmission in matching models. Compatible with the XS versions 500404252, 500404253, 500404254 and 500404255, it is aimed at model building enthusiasts who are looking for compatible components.

Axles & drive shafts

XS Upright set front (2)

€8.99

500405926 Carson XS front wheel set: Two steering knuckles and two brackets for the front axle in 1:10 scale, specially designed for the XS chassis models 500404252, 500404253, 500404254 and 500404255. Precisely manufactured, the parts offer an exact fit, easy assembly and lasting stability - ideal for repairs, tuning and demanding applications.

Additional spares

XS Wheel Hex, nut, pin kit f+r

€5.99

Carson 500405928 XS wheel hub, wheel nut and pin kit for front and rear is aimed at model building enthusiasts and contains four 12 mm wheel hubs, four M4 wheel nuts and four locking pins. Suitable for 1:10 XS chassis and the models 500404252, 500404253, 500404254 and 500404255. A compact set - perfect for targeted repairs or fine setup.

RC chassis & attachments

Antenna Tube Neon 4Pcs.

€3.29

Carson 500908114 Neon antenna tubes (4 pieces) are neon-colored antenna tubes with matching end caps and are supplied as a practical set of 4. Model building enthusiasts appreciate the eye-catching color scheme and the clean finish provided by the end caps; the accessories set specific accents on models and make it easier to replace damaged sleeves.

Replacement & spares for combustion models

Nitroset incl. USB charger

€34.49

The Carson Nitroset 500905128 is the ideal initial equipment for combustion drivers and includes 500 ml tank bottle, glow plug connector with 2000 mAh NiMH battery plus USB charger, glow plug wrench SW 8/9/10/12/17, wheel nut wrench SW 4/4.5/5.5/7 as well as Phillips and slotted screwdriver. Compatible with all combustion vehicles. Not suitable for children under 14 years; keep packaging.

Ball bearings

Ball bearing Set BT-01/MB-01 (18)

€19.99

Carson ball bearing set 500904065 for BT-01/MB-01 provides 18 high-quality ball bearings and is ideal for targeted replacement in your chassis. Included are twelve 5×10 mm (1050), four 5×8 mm (850) and two 8×12 mm (1280) bearings. Precisely manufactured, they improve running smoothness, stability and ease of maintenance.   Warning! Not suitable for children under 14 years.

Ball bearings

3A SCANIA/MAN Ball bearing set (32)

€35.99

Carson 500904053 Ball bearing set 3A SCANIA/MAN (32) is a complete, 32-piece ball bearing set for three-axle Euro tractor units from TAMIYA. Ideal for targeted replacement or revision on models such as Mercedes-Benz Arocs (300056352), Mercedes-Benz Actros, SCANIA R620 Highline and MAN TGX - a must for demanding model builders.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Silicone Fuel Tube 2mm diameter (1m)

€3.29

Carson silicone fuel hose 500905088 with an inner diameter of 2 mm and a length of 1 m is a precisely dimensioned connecting element for fuel lines in model making. As a spare or replacement part for model vehicles, the silicone hose enables secure routing of the fuel supply and integration into existing line routing.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Tank fule bottle 300 ml

€6.69

The Carson 300 ml tank filler bottle (500905078) makes refueling combustion models easier: By squeezing, the elastic bottle draws fuel from the canister via the anodized aluminium filler tube, the measuring scale shows the filling quantity. The angled filler tube is screwed on and the neck holder holds the cap.   Warning! Not suitable for children under 14 years.

Ball bearings

Truck 2-axle Ball bearing set (24)

€25.99

500904027 Truck 2-axle ball bearing set (24 pieces) offers a complete set of ball bearings for trucks with two axles and contains 24 pieces. Model builders will find here a practical spare parts package for maintenance, repair or assembly, which enables quick replacement of all bearing points. Indispensable for hobbyists and professionals; the set enables quick repairs and reduces downtime.   Warning! Not suitable for children under 14 years.

Additional spares

Alu Servo Horn 27mm Carson/FUT 25T

€7.29

500503051 - Alu Servo Horn 27mm Carson/FUT 25T/25Z: This aluminum servo arm was developed for model building enthusiasts and, with a length of exactly 27 mm, offers a suitable solution for Carson/FUT 25 splines. It simplifies the replacement and upgrading of servos and ensures precise linkage and secure mounting.

Ball bearings

Tipper Truck 8x4 Ball bearing set (34)

€58.99

Carson 500904064 34-piece ball bearing set for TAMIYA Tipper Truck 8x4 FH is the complete bearing set for your Tipper Truck 8x4 and contains all the necessary ball bearings for replacement. Model building professionals appreciate the simple integration into the chassis and drive to restore smooth running and reliability.

Ball bearings

Tow Truck 8x4 Ball bearing set (36)

€59.99

Carson 500904062 Tow Truck 8x4 Ball Bearing Set (36) is a 36-piece ball bearing set from Carson, specially designed for the TAMIYA Tow Truck 8x4 FH. Model building enthusiasts who value precision-fit replacements will receive the right bearings for the maintenance and repair of their tow truck to restore its roadworthiness and functionality.

Ball bearings

Truck 3-axle Ball bearing set (30)

€32.49

The Carson truck ball bearing set 500904028 (30 parts) is a complete, reliable set of ball bearings especially for three-axle trucks. With 30 parts, it covers all bearing points and is ideal for replacement during maintenance or repair, so that your model runs smoothly again and all axles turn with low friction.   Warning! Not suitable for children under 14 years.

Ball bearings

US-Trailer/DF-02 Ball Bearing Set (8)

€9.79

Carson ball bearing set 500904030 for US trailers and DF-02 is a complete set of eight ball bearings, specially tailored to Tamiya US trailers and the DF-02 chassis. Model builders will find a perfectly fitting replacement solution for the professional maintenance and repair of their models - compact, complete and ready for use.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Wrench

€6.79

Carson universal glow plug wrench 500905065 is the versatile tool for model builders who require precise maintenance and quick tuning of their engines. With wrench widths of 8/9/10/12/17 mm, it covers the usual sizes of glow plugs and makes specific work on combustion models uncomplicated. Indispensable in the toolbox of dedicated model builders.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

1:8 Air Filter Set, CY-2 Chassis

soon available again

Carson 1:8 air filter set CY-2 Chassis (500205493) is a black, three-part spare parts package specially designed for 1:8 models. The foam insert can be replaced, making maintenance and service life of the filter easier. Precisely manufactured for ambitious model builders who value care and reliability.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

1:8 Airfilter foam (2)

soon available again

Carson 500905118 1:8 foam air filter insert (2 pieces) is the right spare part for model building enthusiasts who carefully maintain their vehicles. Tailor-made for 1:8 scale models and compatible with filter 500905116, the set of 2 makes regular servicing easier thanks to its simple replacement and precise fit.

Pinions & gears

1:8 BL 14T Steel Pinion Gear hard

soon available again

Carson 500906203 - 1:8 BL steel pinion with 14 teeth, hardened. The pinion (module 0.1) is designed for 5 mm motor shafts and is suitable for 1:8 scale models. Model builders benefit from reliable power transmission, high wear resistance and precise gearing for a clean drive. Ideal for replacement.   Warning! Not suitable for children under 14 years.

Pinions & gears

1:8 BL 16T Steel Pinion Gear hard

soon available again

The Carson motor pinion 500906205 (1:8 BL 16T Steel Pinion Gear hard) brings racing quality to the 1:8 model: hardened steel reduces wear and ensures precise power transmission. Suitable for M1 gear modules and 5 mm motor shafts, two mounting holes (120° offset). M4 grub screws included; medium-strength threadlocker recommended.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

1:8 Power Pipe set chrome

soon available again

Carson 1:8 Power Pipe Set Chrome (500905071) is a chrome-colored power pipe set in 1:8 scale and is aimed at model building enthusiasts who want to give their vehicle a striking finish and more authenticity. Ideal for collectors and scale fans who appreciate detail-oriented looks and eye-catching accents.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Virus-Ex Wing mount posts

soon available again

500405943 Carson Virus-Ex wing mount posts are precision-fit replacements for attaching spoilers, brackets and wheelie bars to the Virus Extreme. Specifically compatible with the 500409074 and 500409084 models, they offer a perfect fit for targeted replacement on the Virus-Ex and appeal to ambitious model builders who prefer parts that are true to the original.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Body kit KOD Brushless

soon available again

The Carson 1:8 Body Kit KoD Brushless (500801025) includes bodywork, decals and spoiler and is suitable for King of Dirt Brushless 500409063. Model building enthusiasts get an original replacement and upgrade set for their 1:8 model, which emphasizes the styles and identity of the vehicle. The set is suitable both as a spare part and as a visual upgrade for your model.

RC chassis & attachments

Body parts Set Stadium Fighter

soon available again

Carson 1/10th scale body parts set XS Stadium Fighter (500800110) presents an orange painted body including rear spoiler, stickers and body sprints for 1/10th scale XS chassis. The set fits the XS models 500404252, 500404253, 500404254 and 500404255 and gives your Stadium Fighter a striking racing look.

RC chassis & attachments

KOD Rear Wing

soon available again

500405915 King of Dirt rear spoiler from Carson is the original rear part for KoD models and is supplied complete with screws. With its striking appearance, it is aimed at model building enthusiasts who want to enhance the look of their vehicle or fit an original spare part. As a Carson accessory, it completes your collection.

Pinions & gears

Pinion Gear Module 0,6 steel, 12T

soon available again

500013420 Pinion Gear Module 0.6 made of steel, 12 teeth is a robust motor pinion for model builders. It fits vehicles with main gear module M 0.6 (TAMIYA Standard/On-Road) and is suitable for 540/550 motor shafts with 3.17-3.20 mm. The hardened surface reduces wear; a grub screw is included. Please observe the gear ratio information in your model instructions.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 14T

soon available again

The motor pinion Carson 500013422 - Pinion Gear Module 0.6 Steel, 14T - offers model building enthusiasts precise power transmission and increased durability thanks to its hardened steel surface. It fits main gears with module M0.6 (TAMIYA Standard/On-Road) and motor shafts 540/550 with 3.17-3.20 mm; the matching grub screw is included in the scope of delivery. Please observe the notes or gear ratio table in the model instructions.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 16T

soon available again

Carson motor pinion 500013424 - Pinion Gear Module 0.6, 16 teeth made of hardened, tempered steel, developed for demanding model builders. The finish reduces wear; grub screw included. Fits motor shafts 3.17-3.20 mm (540/550) and vehicles with M0.6 main gear (TAMIYA Standard/On-Road). Please observe the notes/ratio table in the instructions.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 17T

soon available again

500013425 - Motor pinion (module 0.6) made of hardened steel, 17 teeth, ideal for demanding model builders. The precisely milled pinion fits vehicles with main gear module M0.6 (TAMIYA standard) and on motor shafts 3.17-3.20 mm (540/550). Scope of delivery: matching grub screw. Note: Observe the gear ratio table in the model instructions.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,6 steel, 19T

soon available again

The motor pinion 500013427 (module 0.6, 19 teeth) from Carson is a hardened steel pinion for model builders, which impresses with its low-wear surface and the grub screw supplied for secure fastening. Suitable for all vehicles with M0.6 (TAMIYA standard) and motor shafts 3.17-3.20 mm (size 540/550). Please observe the notes and gear ratio table in the model instructions.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,8 steel 15T

soon available again

500013405 - Motor pinion M0.8 (15 teeth) made of hardened, high-quality steel is the ideal spare part for demanding model builders. Suitable for vehicles with main gear module M0.8 (TAMIYA Off-Road) and suitable for motor shafts 3.17-3.20 mm (540/550), the hardened surface reduces wear. Incl. grub screw; please observe the instructions/ratio table.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,8 steel, 10T

soon available again

500013400: Motor pinion module 0.8 made of steel with 10 teeth combines precision and robustness and is designed for vehicles with main gear module M0.8 (TAMIYA Off-Road). Suitable for motor shafts Ø 3.17-3.20 mm (motor size 540/550), including grub screw; hardened surface reduces wear. Please refer to the gear ratio table in the model instructions.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,8 steel, 12T

soon available again

500013437 - Motor pinion module 0.8 made of steel with 12 teeth, the precise spare part for demanding model builders, manufactured with a hardened surface to reduce wear. Fits motor shafts 3.17-3.20 mm (motor size 540/550), including grub screw and suitable for vehicles with M0.8 main gear (TAMIYA Off-Road); follow the instructions in the manual for your model.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,8 steel, 14T

soon available again

500013439 - Carson motor pinion module 0.8, 14 teeth: A robust steel pinion with grub screw, especially for vehicles with main gear module M0.8 (TAMIYA Off-Road). The hardened surface reduces wear; suitable for 540/550 motor shafts 3.17-3.20 mm. Easy to fit, ideal for precise gear ratios and long-lasting performance.   Warning! Not suitable for children under 14 years.

Pinions & gears

Pinion Gear Module 0,8 steel, 18T

soon available again

Carson motor pinion 500013408 - steel pinion module 0.8, 18 teeth, supplied with grub screw. This steel motor pinion fits all vehicles with main gear module M 0.8 (TAMIYA Off-Road) and is designed for motor shafts of 3.17-3.20 mm (size 540/550). The hardened surface reduces wear; observe the notes/ratio table in the manufacturer's instructions.   Warning! Not suitable for children under 14 years.

Pinions & gears

Steel Pinion Gear 17T steel M0.8

soon available again

The 500013407 motor pinion 17T made of high-quality steel (M0.8) is a robust spare part for model builders, suitable for vehicles with gear module M0.8 (TAMIYA Off-Road). The hardened surface reduces wear. Suitable for motor shafts 3.17-3.20 mm (motor sizes 540/550) and is supplied including grub screw. Follow the instructions in the manual.   Warning! Not suitable for children under 14 years.

Pinions & gears

Steel Pinion Gear 19T steel, M0.8

soon available again

Carson motor pinion 500013409 (19 teeth, steel, M0.8) combines precision and robustness for model builders. The hardened surface reduces wear, the pinion is supplied with a matching grub screw and fits motor shafts 3.17-3.20 mm (motor sizes 540/550). Suitable for vehicles with M0.8 main gear module (e.g. TAMIYA Off-Road); please refer to the gear ratio table in the model instructions.   Warning! Not suitable for children under 14 years.

Additional spares

Virus 4.0 Chassis Brace Set front/rear

soon available again

The 500205965 Virus/Akuma chassis reinforcement set provides two precisely manufactured aluminum parts for targeted reinforcement of the front and rear chassis and appeals to model building enthusiasts who want to optimize chassis stability. Suitable for Virus 4.0-4.3, Race and Extreme as well as Akuma models (500409082, 500409083), it guarantees a precise fit and robust quality.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

X10E Alloy front shock tower

soon available again

X10E aluminum shock tower 500405401 from Carson is the aluminum front shock tower for the X10E chassis. Model building enthusiasts will find a suitable spare part here, which covers the original front shock mount and integrates seamlessly into the X10E. A valuable addition for ambitious hobbyists.   Warning! Not suitable for children under 14 years.

Pinions & gears

X10EB Differential complete, front

soon available again

Carson 500405362 X10EB differential complete front is the spare part that combines the differential and bevel pinion for your X10EB. Model builders appreciate the precisely fitting design for uncomplicated repair or replacement, so that the driving behavior works precisely again and your vehicle remains reliably ready for use.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Antenna Tube Black 4Pcs.

soon available again

Carson Antenna Tube Black 4Pcs. (500908115) provides four flexible and robust antenna tubes in black, designed as a replacement and supplementary set for your model range. Model builders will find here a compact solution for refreshing the antenna optics; the four pieces can be used universally and impress with their flexibility and durability.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

only available from customer service

Axles & drive shafts

only available from customer service

Axles & drive shafts

only available from customer service

Axles & drive shafts

only available from customer service

Axles & drive shafts

only available from customer service

Pinions & gears

only available from customer service

Additional spares

only available from customer service

Additional spares

only available from customer service

Additional spares

only available from customer service

Ball bearings

1:10 Ball Bearing

only available from customer service

Carson 500405803 - 1:10 ball bearing is a spare part for 1:10 scale models and appeals specifically to model building enthusiasts who rely on precisely fitting components. The bearing serves as a direct replacement for corresponding applications in the chassis and facilitates the restoration or maintenance of your models. A perfect fit.

Additional spares

1:10 Battery Holder

only available from customer service

Carson 1:10 Battery Holder (500405782) is a precisely designed battery compartment replacement for 1:10 scale models. Model building enthusiasts will find a purpose-built component here that provides space for the power carriers and thus ensures the vehicle's power supply. A useful original part for maintaining and repairing your model.

RC chassis & attachments

1:10 Body Holder

only available from customer service

Carson 1:10 Body Holder (material number 500405796) is a mounting part specially developed for 1:10 scale models that offers model building enthusiasts a practical and reliable solution for fixing the body. Easy to use, it ensures a clean appearance on the model and makes maintenance and quick tuning work easier.

RC chassis & attachments

1:10 Body Holder Set

only available from customer service

500405793 - Carson 1:10 Body Holder Set is the suitable mounting set for 1:10 scale car bodies and is aimed at demanding model builders. As a spare part or addition, it ensures secure fixing of the vehicle body and supports exact positioning during repairs, conversions and detail work.

RC chassis & attachments

1:10 Body Set

only available from customer service

Carson 1:10 Body Set (500405787) is a 1:10 scale body for demanding model builders and fans. The set enables the replacement or individualization of 1:10 models, gives the vehicle its own character and is aimed at hobbyists who want to emphasize the look and personality of their model.

RC chassis & attachments

1:10 Cage

only available from customer service

Carson 1:10 Cage (500405801) is an accessory for 1:10 scale models and is aimed at model building enthusiasts. This cage component complements your models true to scale and offers the perfect addition for conversion projects and collector's models, ideal for anyone looking for specific replacements and accessories.

Axles & drive shafts

1:10 Center Main Shaft

only available from customer service

Carson 500405800 - Center Main Shaft for 1:10 scale models is aimed at model building enthusiasts who need a precisely fitting replacement shaft for their vehicle. The component is specially designed for the 1:10 scale and can be used in corresponding Carson models, ideal for targeted repair and maintenance of the driving function.   Warning! Not suitable for children under 14 years.

Additional spares

1:10 Chassis Cover

only available from customer service

Carson 500405802, the 1:10 Chassis Cover, is a scale cover for 1:10 models and appeals specifically to model building enthusiasts. This part provides a harmonious visual finish to the chassis and offers an elegant, model-friendly solution for completely covering the chassis in a true-to-scale presentation.

Additional spares

1:10 Chassis Frame

only available from customer service

Carson 1:10 Chassis Frame (material number 500405779) is a precise 1:10 scale frame component for demanding model builders. As a central base frame, it enables precise assembly, targeted repair and individual adjustments to the model. An essential component for enthusiasts who expect precision and function.

Additional spares

1:10 Chassis Holder A

only available from customer service

Carson 1:10 Chassis Holder A (500405794) is an accessory and spare part for 1:10 scale models and is aimed specifically at model building enthusiasts. As a component from the Carson accessory line, it supports maintenance, replacement and adjustments to the chassis of your models and thus facilitates maintenance and targeted use for repairs.

Additional spares

1:10 Chassis Holder B

only available from customer service

Carson 1:10 Chassis Holder B (500405795) is a targeted component for 1:10 scale models and appeals to model building enthusiasts who want to complete their spare parts kit. As a specific part for chassis, it complements the workshop equipment, facilitates project planning and fits into ambitious DIY projects.

RC shock absorbers & damper bridges

1:10 Damper Set (4)

only available from customer service

500405780 Carson 1:10 shock absorber set (4) offers four shock absorbers for 1:10 model vehicles and is aimed at model building enthusiasts who want to replace or renew suspension components. The compact set supports maintenance and repair and helps to reliably restore the usual damping function of your model.

Axles & drive shafts

1:10 Differential complete

only available from customer service

500405775 - the complete 1/10th scale differential from Carson offers model building enthusiasts a suitable spare part for precise repair and reconditioning of their vehicles. As a complete unit, it simplifies replacement and assembly, ensures correct function in 1:10 scale and is an indispensable part of any workshop.

Axles & drive shafts

1:10 Drive Shaft front

only available from customer service

The Carson 1:10 front drive shaft (500405777) is a high-quality spare part for 1:10 scale models and is aimed at demanding model builders who expect stability and precise power transmission. Precisely manufactured for accurate replacement, it facilitates repair or performance optimization and ensures reliable operation in everyday use.

Axles & drive shafts

1:10 Drive Shaft real

only available from customer service

The Carson drive shaft 500405778 on a scale of 1:10 (Drive Shaft real) is a precise spare part for demanding model builders. Specially developed for 1:10 vehicles, it ensures reliable power transmission and is ideal for replacing or repairing defective drive parts. Accurate fit and performance bring your model back to top form.

Pinions & gears

1:10 Driving Diff. Gear Set

only available from customer service

Carson 500405776 - 1:10 Driving Diff. Gear Set is an original spare part for model builders who want to repair, optimize or complete their 1:10 driving differential. The set is aimed specifically at enthusiasts who are looking for precisely fitting components from the Carson parts series for maintenance and replacement.

Additional spares

1:10 Gear Cover

only available from customer service

Carson 500405788 1:10 Gear Cover presents itself as an indispensable spare part for model building enthusiasts, suitable for 1:10 scale vehicles. This precise accessory enables targeted repairs and retrofits, maintains the functionality of your model and ensures detailed restoration and driving fun.

Additional spares

1:10 Magictape

only available from customer service

Carson 1:10 Magictape 500405786 is aimed at model builders and contains two Velcro strips for 1:10 scale models, each 220 mm long and 24 mm wide. The strips offer a compact mounting option for 1:10 vehicles and are a practical addition to model accessories. The dimensions given in millimeters facilitate precise planning during installation.

Pinions & gears

1:10 Main Differential

only available from customer service

The Carson 1:10 main differential (500405783) is designated as a component for 1:10 scale vehicles and is aimed at model building enthusiasts. This main differential designates the central differential element in the drive area and is suitable for targeted installation or replacement in 1:10 scale models if the corresponding components are required.

Pinions & gears

1:10 Pinion Gear

only available from customer service

Carson 500405785 1:10 pinion is the compact spare part for 1:10 scale models from Carson and a must-have for demanding model builders. It allows precise replacement to restore the drive function, impresses with its precise dimensions and ensures reliable power transmission and long-lasting usability in 1:10 scale.

Axles & drive shafts

1:10 Pivot

only available from customer service

Carson 1:10 Pivot (500405792) is an original spare part for 1:10 scale models and is aimed at ambitious model builders who are looking for replacements or specific upgrades. As a suitable accessory from Carson, it provides the necessary functionality in the body and offers a reliable basis for repairs or modifications.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

1:10 Pivot Cover

only available from customer service

Carson 1:10 Pivot Cover - 500405790 is a cover part for 1:10 scale models from Carson. Model builders will find a suitable replacement or tuning part here that neatly closes off the area and rounds off the overall appearance of the vehicle. Ideal for enthusiasts who value detail. It complements the Carson parts range and is a targeted choice if you are looking for replacements or detail care for your 1:10 model.

Axles & drive shafts

1:10 Pivot Holder

only available from customer service

Carson 500405791 1:10 Pivot Holder is a precise spare part for 1:10 scale models and is aimed at model building enthusiasts who are looking for a true-to-original repair or targeted upgrading of their chassis. As a precisely fitting component, it supports the restoration of central steering and suspension functions.

Screws

1:10 Screw Set

only available from customer service

Carson 500405781 1:10 screw set offers model builders the right fastening elements for assembling, maintaining and quickly repairing their 1:10 models. The set is designed as a spare part, facilitates precise assembly work and ensures that moving parts remain securely fixed - indispensable for ambitious enthusiasts.

Axles & drive shafts

1:10 Shaft Cover

only available from customer service

The Carson 1:10 Shaft Cover (500405789) is a precisely fitting addition for 1:10 scale models and offers the visual and functional completion of drive shafts. Model building enthusiasts appreciate the precisely manufactured solution for clean integration into existing chassis-ideal for detail-oriented repair and optimization.

Additional spares

1:10 Slipperclutch

only available from customer service

Carson 1:10 Slipperclutch (item number 500405784) is aimed at model building enthusiasts who need a suitable component for 1:10 scale vehicles. As part of the Carson range of accessories, it offers a faithful option for replacing or maintaining your model and appeals to collectors and active drivers who value attention to detail.

Wishbones

1:10 Suspension Arms

only available from customer service

Carson 1:10 Suspension Arms (material number 500405797) are intended as spare parts for 1:10 scale models and are aimed specifically at model building enthusiasts. The suspension arms enable the targeted replacement of damaged components, facilitate maintenance and repair and are a useful addition for ambitious hobbyists.

Wishbones

1:10 Suspension Holder

only available from customer service

The Carson 1:10 Suspension Holder (item no. 500405798) is a component designed for 1:10 scale models for mounting the suspension. Model building enthusiasts will find it a functional spare part for repair and restoration that impresses with its clear practicality and supports the mounting of the suspension assembly.

RC chassis & attachments

1:5 Dirt Attack DMAX Body Set

only available from customer service

Carson 1:5 Dirt Attack DMAX Body Set (500405857) is a body kit for 1:5 scale models and is aimed at ambitious model builders who want to give their vehicle a striking off-road look. The set opens up a wide range of possibilities for visually enhancing and customizing your model.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

1:8 Body FY8 w/decals and spoiler

only available from customer service

1:8 scale body FY8 (500801013) with decals and rear spoiler combines a striking blue/white design with a robust polycarbonate finish. The fully printed and glued, pre-drilled body is supplied with a rear spoiler, can be quickly fitted to 1:8 buggies and offers precise protection and a sporty look.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

23/27ccm glow plug short NGK CMR 7H

only available from customer service

The Carson 500903215 NGK CMR 7H short glow plug for 23/27 cc engines is an exact replacement for part numbers 32730 and 32588. Model building enthusiasts benefit from simple installation and reliable operation; the short design enables seamless integration into typical designs and facilitates maintenance and replacement.

Replacement & spares for combustion models

Air filter set CV-10

available in stores

Carson Air Filter Set CV-10 (500105141) is an original spare part for CV-10 applications and replaces the part number 500054947. Model building enthusiasts who are specifically looking for a suitable replacement part will find a filter set from Carson specially designed for CV-10 - a clear option for targeted part replacement.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

BAD BUSTER 2.0 Body 500402129

only available from customer service

Wishbones

BAD BUSTER 2.0 wishbone bracket set

only available from customer service

Axles & drive shafts

BAD BUSTER drive shaft/wheel axle. (2) rear

only available from customer service

Axles & drive shafts

BAD BUSTER front drive shafts (2)

only available from customer service

Pinions & gears

BAD BUSTER motor pinion 21Z

only available from customer service

Axles & drive shafts

BAD BUSTER rod set

only available from customer service

Wishbones

BAD BUSTER wishbone set f/h

only available from customer service

Additional spares

Ball ends long (8) CV-10

only available from customer service

500105134 - Carson Ball Ends Long (8) for CV-10 are an original spare parts set for model builders looking for reliable connecting elements. The set contains eight long ball ends and fits as a replacement for the articles 500103020, 500103038, 500103042 and 500103043. Ideal for repairing and maintaining your models.

Additional spares

Ball ends short (8) CV-10

only available from customer service

Carson Ball Ends Short (8) CV-10 - 500105138 - offer model building enthusiasts precise, short ball ends in a set of 8 for the CV-10 system. Designed for precise replacement or as stock, they combine technical reliability with easy integration into the model and ensure long-lasting functionality.   Warning! Not suitable for children under 14 years.

Additional spares

Ball head set CV-10

only available from customer service

Carson Ball head set CV-10 (500105150) is the precise ball head set for model builders who want to repair or upgrade their CV-10 system. As a precisely fitting replacement part, it ensures reliable connections in the joint area, is easy to install and offers long-lasting functionality for ambitious model projects.

RC chassis & attachments

Body Holder Truggy

only available from customer service

The Carson Body Holder Truggy 500405698 is an original spare part for Truggy models and ensures secure body mounting during repair, tuning or rebuilding. Model building enthusiasts appreciate this precisely matched component, which facilitates replacement and repair and preserves the authentic driving appearance of your model.

RC chassis & attachments

Body Mega Duster 3.0

only available from customer service

Body incl. sticker  Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Brake set (complete incl. parts) CV-10

only available from customer service

500105118 Brake set CV-10 from Carson is a complete brake set including all parts for the CV-10. Model building enthusiasts and hobbyists receive a complete spare parts package for replacing or repairing the CV-10 and can maintain their model in a targeted manner. A practical complete package from Carson for all those who rely on original parts for the CV-10 and value complete parts equipment.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Bumper front / rear Stormracer

only available from customer service

Carson Bumper front/rear Stormracer 500105291 offers the right solution as a replacement part for the front and rear bumper on the Stormracer. Identifies itself as a replacement for the part number 500105165 and is aimed at model building enthusiasts who want to maintain or repair their Stormracer true to the original; an uncomplicated replacement offer for targeted repairs.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

Car Body X-Crawlee 3.0    

only available from customer service

Carson 1:10 Body X-Crawlee 3.0 (material number 500800113) is the body for the X-Crawlee 3.0 in 1:10 scale and is aimed at model building enthusiasts who want to renew their vehicle true to the original or change its appearance. Ideal for collectors and tuners who value attention to detail. Perfect for replacing damaged bodies or for customizing your model.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

CDV Front Set 2x

only available from customer service

The Carson CVD Front Set 500405448 (2x) is a compact replacement set for the front drive side and is aimed at model builders who are looking for precise repairs or targeted upgrades. The two CVD components enable precise installation and provide a reliable supply for quick replacement in the event of maintenance or damage.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Centre drive shaft set CV-10

only available from customer service

Carson center drive shaft set CV-10 (500105133) is the original replacement and tuning part for CV-10 models. The center drive shaft set is specifically designed to repair or modify the drive axle of your model and ensures compatibility within the CV-10 series. A must for dedicated model builders and mechanics.

Axles & drive shafts

Crankshaft adapter set CV-10

only available from customer service

Carson 500105146, Crankshaft adapter set CV-10, is a crankshaft adapter set for the specific adaptation or replacement of crankshafts in model making. For model builders and hobbyists, this compact set offers a clear replacement and supplementary solution with which repair and conversion projects on the drive mechanism can be realized.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

CROWN AND BEVELGEAR-SET CV-10

only available from customer service

Carson CROWN AND BEVELGEAR-SET 500105294 is a gear set with crown and bevel gears for model building applications. It is used to replace or supplement gear components and is aimed at model building enthusiasts who want to replace or adapt specific components. As an accessory from Carson, it complements existing assemblies and facilitates targeted replacement.

Ball bearings

CV-10 Ball bearing set (18)

only available from customer service

Carson ball bearing set CV-10 (500105149) with 15 ball bearings is the compact replacement set for model builders who value components that are true to the original. The CV-10 set contains exactly 15 bearings for the targeted maintenance and repair of your models and appeals to enthusiasts who value precision and interchangeability.

Axles & drive shafts

CV-10 Driver for central shaft

only available from customer service

Screws

CV-10 pivot ball screw M10 (4)

only available from customer service

Additional spares

CV-10B/T Chassis plate

only available from customer service

Axles & drive shafts

CV-10B/T shaft 2 pcs

only available from customer service

Carson CV-10B/T drive shafts set of 2 (500405135) in black: Two shafts for model builders and hobbyists, compactly packaged as a set of 2. These black CV-10B/T shafts will complement your parts kit and will appeal to collectors and users looking for matching replacement components in a brand-typical design. Now available.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

CY5 Body Brace

only available from customer service

Carson CY5 Body Brace (500405464) is the original component for your CY5 model and is aimed at demanding model builders who prefer original accessories. The body brace complements the body structure, supports the detailed restoration and offers the brand-appropriate solution for precise fitting.

Axles & drive shafts

CY5 center differential 46Z

only available from customer service

Axles & drive shafts

CY5 center differential mount

only available from customer service

RC chassis & attachments

CY5 Chassis PORSCHE 934

only available from customer service

Replacement & spares for combustion models

CY5 Chassis upper deck set

only available from customer service

Wishbones

CY5 Control arm bracket

only available from customer service

Axles & drive shafts

CY5 Differentials (2) complete front/rear

only available from customer service

Axles & drive shafts

CY5 Drive bone, 2 pieces

only available from customer service

Replacement & spares for combustion models

CY5 Front Bumper Holder

only available from customer service

The 500405459 CY5 Front Bumper Holder from Carson is the right spare part for CY5 models and serves as a holder for the front bumper. Model building enthusiasts appreciate such original components to replace damaged front parts and restore the aesthetics and function of their vehicle.

Axles & drive shafts

CY5 Front steering knuckle (2)

only available from customer service

Wishbones

CY5 Linkage set tie rods control arm

only available from customer service

Replacement & spares for combustion models

CY5 Motor mount

only available from customer service

Axles & drive shafts

CY5 Rear steering knuckle (2) & wheel axle (2)

only available from customer service

Screws

CY5 screw set

only available from customer service

RC shock absorbers & damper bridges

CY5 shock absorber (2) 105mm

only available from customer service

Axles & drive shafts

CY5 Steering linkage/servo bracket

only available from customer service

Replacement & spares for combustion models

CY5 steering servo saver set

only available from customer service

Replacement & spares for combustion models

CY5 Wheel hub (4) 22mm PORSCHE 934

only available from customer service

RC chassis & attachments

DNA Body Set

only available from customer service

Carson DNA Body Set 500405694 is the DNA Body Set from Carson, designed for model builders and collectors. This body set appeals to enthusiasts who want to give their models a distinctive look and personal touch. As a stylish model accessory, it offers scope for creative refinement and detailed individualization.

Pinions & gears

DNA Pinion Gear

only available from customer service

The Carson pinion 500405696 DNA Pinion Gear offers model building enthusiasts a precise spare part for the drive. Careful manufacturing ensures reliable power transmission and long-lasting performance when replacing worn components. Ideal for detail-loving hobbyists who value quality.

RC chassis & attachments

DNA Roll Cage

only available from customer service

Carson DNA Roll Cage 500405693 is the original DNA Roll Cage accessory for modelers who want to give their vehicle maximum authenticity and a striking presence. This original Carson part appeals to detail enthusiasts and customizers who want to enhance the look, style and individual design of their model. A must for all those who want to enhance their models with characterful components.

RC shock absorbers & damper bridges

DNA Shocktower Set

only available from customer service

Carson DNA Shocktower Set 500405697 is a shocktower set from Carson for model building applications. As a specially designated accessory in the model accessories range, it is aimed at enthusiasts who rely on suitable parts for maintaining, replacing or upgrading their models. As part of the Carson range of model accessories, it supplements the model supply.

Axles & drive shafts

Drive shaft (2) 59,6mm CV-10

only available from customer service

Carson material number 500105132 presents a pair of drive shafts in CV-10 format with a length of 59.6 mm, manufactured for precise replacement and reliable power transmission. Model builders appreciate the precise fit and easy installation; the robust construction ensures consistent driving behavior and extends the service life of your model.   Warning! Not suitable for children under 14 years.

Additional spares

Drive shaft joint for gearbox side

only available from customer service

Carson 500105130 Drive shaft coupling for the transmission side (CV-10) is aimed at model builders who are looking for an original spare part for repairing or replacing drive shafts. Brand quality from Carson, suitable for model building and ideal for users who prefer precise components. Marking CV-10 facilitates identification in the parts store.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Drive shaft set centre CV-10B/ T

only available from customer service

The Carson Drive shaft set center CV-10B/T (material number 500105174) is a central drive shaft set for models with CV-10B/T compatibility. Model building enthusiasts use this set to specifically maintain or restore their CV-10B/T; supplied as a set for direct part replacement during service and repair.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Engine support (2) CV-10

only available from customer service

Carson 500105145 Motor mounts (2) for CV-10 offer a practical spare parts set for securely mounting the motor in CV-10 models. Precisely manufactured for accurate fitting, they enable uncomplicated replacement and restoration of the driving function. A must-have for model builders who value originality and reliability.

Axles & drive shafts

FE-Line axle/wheel axle set (2) front

only available from customer service

Steering knuckle (2) with steering knuckle bracket (2), retaining pins (4) and wheel axles (2) Front axle

Additional spares

FE-Line battery compartment cover (vehicle or transmitter)

only available from customer service

Battery compartment cover for vehicle or transmitter

RC chassis & attachments

FE-Line body mount (4)

only available from customer service

Body mount 4 pieces

RC chassis & attachments

FE-Line body mount (4) On Road

only available from customer service

Body mount 4 pieces, On Road

Additional spares

FE-Line Chassis Set gray

only available from customer service

Chassis parts top and bottom

Wishbones

FE-Line control arm/knuckle (2) rear

only available from customer service

Upper wishbone (2), lower wishbone (2), steering knuckle (2), retaining pins (4) rear axle

Axles & drive shafts

FE-Line drive shaft set (2)

only available from customer service

Drive shaft set (2) incl. wheel driver

RC chassis & attachments

FE-Line front bumper/bumper 2-piece

only available from customer service

Front bumper or front bumper 2-piece

RC chassis & attachments

FE-Line front bumper/bumper 2-piece wide

only available from customer service

Front bumper or front bumper 2-piece, wide version

Additional spares

FE-Line front bumper/bumper one-piece

only available from customer service

Front bumper or front bumper 1-piece

RC shock absorbers & damper bridges

FE-Line front shock tower

only available from customer service

Single front shock absorber bracket.

Wishbones

FE-Line lower wishbone (4)

only available from customer service

Lower wishbones 2x front and 2x rear axle

Pinions & gears

FE-Line motor with pinion

only available from customer service

Electric motor incl. motor pinion

Pinions & gears

FE-Line rear axle/differential complete

only available from customer service

Rear axle incl. differential completely mounted

Screws

FE-Line screw set

only available from customer service

Multi-part screw set

Additional spares

FE-Line servo incl. servo saver

only available from customer service

Steering servo incl. servo saver

Additional spares

FE-Line servo saver set

only available from customer service

Multi-part servo saver

Additional spares

FE-Line Servo Saver Set On Road

only available from customer service

Servosafer multiple on road

RC shock absorbers & damper bridges

FE-Line shock absorber (4) front & rear

only available from customer service

Shock absorber 2x front and 2x rear axle

Axles & drive shafts

FE-Line steering knuckle (2) front On Road

only available from customer service

Steering knuckle (2) with steering knuckle bracket (2) and wheel axles (2) Front axle, on-road

Axles & drive shafts

FE-Line steering linkage set (3)

only available from customer service

3-piece steering linkage set incl. screws

Additional spares

FE-Line steering wheel and driver for transmitter

only available from customer service

Steering wheel repair kit for the neutral position.

Additional spares

FE-Line transmitter/remote control incl. receiver board

only available from customer service

Remote control incl. receiver board and cable

Wishbones

FE-Line upper wishbone (4) Off Road

only available from customer service

Upper wishbone 2x front and 2x rear axle

Replacement & spares for combustion models

Flywheel for 2-shoe clutch CV- 10

only available from customer service

Carson 500105142 Flywheel for 2-jaw clutch CV-10 is the clearly named component for models with CV-10 clutch. Model building enthusiasts will find a directly assignable replacement part here, which serves to restore the clutch function and is used for repair and maintenance of the CV-10 unit. The specification explicitly refers to compatibility with the CV-10 system.

Replacement & spares for combustion models

Force One Way Bearing

only available from customer service

The Carson Force One Way Bearing 500054550 is an original Force sprag roller freewheel for model making. This precise spare part ensures directional rotation and is aimed at enthusiasts who use original components to repair, maintain or precisely restore their models. The material number ensures clear interchangeability.   Warning! Not suitable for children under 14 years.

Wishbones

Front Upper/Lower Arms (2) CY-2

only available from customer service

Carson 500205646 Front Upper/Lower Arms (2) CY-2 are the front upper and lower wishbones for the Street Breaker CY-2. This set of two is an original spare part for the front axle and is aimed at model building enthusiasts who want to repair or maintain their CY-2 model. Original from Carson.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

FY10 2.0 body kit

only available from customer service

Body kit incl. spoiler and stickers  Warning! Not suitable for children under 14 years.

Axles & drive shafts

FY10 Axle w/Pin, 2 pcs

only available from customer service

Carson FY10 axle with split pin (500405260) is a 2-piece replacement kit for the 1/10th scale DESTROYER DFFY. This compact kit contains two axles with mounting pin and is ideal for quick repairs or targeted upgrades to your model. Model building enthusiasts benefit from the simple assembly and direct replacement option.   Warning! Not suitable for children under 14 years.

Screws

FY10 B-Head Cross Screw, 84 pcs

only available from customer service

The Carson FY10 B-Head Phillips screw set 500405278 offers 84 screws as a complete kit for DESTROYER and DFFY-1/10 models. Specially designed for the FY10 program, the set is suitable as a spare parts supply for chassis and fasteners and facilitates repair work. The 84 B-Head Phillips screws are included in the scope of delivery.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

FY10 Body with Spoiler

only available from customer service

The Carson FY10 body with spoiler (500405291) is a kit for the DESTROYER DFFY 1/10 and offers model builders an attractive, characterful outer skin for their 1/10 vehicle. Designed as a body with spoiler, this kit is aimed at enthusiasts who want to emphasize the look and individuality of their DESTROYER.

Pinions & gears

FY10 Central Drive Shaft Main Gear

only available from customer service

500405298 Carson FY10 Central Drive Shaft Main Gear Kit is the replacement kit for the central drive gear of the 1/10th scale DESTROYER and DFFY models. Model building enthusiasts appreciate the kit for the precise repair or maintenance of their vehicles to restore the original drive function.   Warning! Not suitable for children under 14 years.

Additional spares

FY10 Chassis

only available from customer service

Additional spares

FY10 Destroyer Anti Roll Bar

only available from customer service

500405437 - Anti-roll bar kit for the DESTROYER FY 1/10T. This precise kit is aimed at model building enthusiasts who want to refine their chassis. Robustly manufactured components ensure consistent performance and an exact fit, ideal for upgrading or replacing parts on the FY10-Destroyer.

Ball bearings

FY10 Destroyer Ball bearing, 8pcs

only available from customer service

Carson 500405280 FY10 Destroyer ball bearing kit includes eight ball bearings, especially for the 1:10 DESTROYER/DFFY. For model builders, this means noticeably quieter axles, increased durability and uncomplicated installation - ideal for targeted replacement or for optimizing the performance of your model. A must-have for targeted maintenance.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

FY10 Destroyer Brace

only available from customer service

Carson FY10 Destroyer Brace (500405289) is a kit for modelers. This kit allows the Destroyer Brace to be built independently and is aimed at enthusiasts who appreciate detailed craftsmanship and individual design. Ideal for the targeted expansion or repair of models.   Warning! Not suitable for children under 14 years.

Additional spares

FY10 Differential Housing

only available from customer service

Carson FY10 Differential Housing (500405284) is a complete diff kit for 1/10th scale DFFY/Destroyer and includes upper and lower gears. Modelers will appreciate this replacement kit for direct repair or replacement of your vehicle's differential components. Specially designed for the Destroyer DFFY, the kit enables targeted replacement of the differential parts.   Warning! Not suitable for children under 14 years.

Pinions & gears

FY10 Differential Unit

only available from customer service

FY10 Differential Unit 500405283 from Carson is a spare part for model builders and is used to replace defective differentials. As a direct replacement for the parts 500405295 and 500405299, it is the right component for repair work and helps model building enthusiasts to repair their vehicles in a targeted manner.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

FY10 Dive Shaft, 2pcs

only available from customer service

500405264 FY10 Drive Shaft (2 pieces) from Carson - Drive shaft kit for DESTROYER DFFY 1/10. The two-piece drive shaft set provides the right components for replacement or repair on the 1:10 vehicles mentioned. Model builders appreciate the direct compatibility with the FY10 configuration for precise repairs.   Warning! Not suitable for children under 14 years.

Screws

FY10 Flat Cross Screw, 48 pcs

only available from customer service

Carson 500405277 FY10 flat cross screw kit contains 48 flat cross screws and is intended as a mounting set for the DESTROYER DFFY 1/10. The compact set allows targeted replacement and repair of individual fixing points and is specially designed for the 1:10 models mentioned. A must for model builders who want to maintain their 1/10th scale model with precision.   Warning! Not suitable for children under 14 years.

Screws

FY10 Front Carrier left + right, 2pcs

only available from customer service

The Carson 500405262 FY10 Front Carrier left and right (2 pieces) is a replacement and mounting kit for Destroyer DFFY in 1:10 scale and includes carriers for front and rear axle. Specially designed for the 1/10th scale, it allows precise restoration or a targeted upgrade of the axle guide - ideal for modelers who value accuracy of fit and control.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

FY10 Front Drive Shaft

only available from customer service

Carson FY10 Front Drive Shaft 500405293 is the front drive shaft kit for Destroyer DFFY 1/10 and provides an exact replacement for the front axle of your model. Ideal for restoring function and handling; the kit is aimed at ambitious model builders who want to repair their chassis precisely.   Warning! Not suitable for children under 14 years.

Wishbones

FY10 Front Lower Suspenion Arm l/r

only available from customer service

Carson 500405263 FY10 Front Lower Suspension Arm l/r Kit is the original spare part for the front lower wishbones (left/right) of the 1/10th scale DESTROYER DFFY. The L/R kit is aimed at demanding model builders who want to replace or repair their suspension true to the original; ideal as a spare part for maintenance and repair.   Warning! Not suitable for children under 14 years.

Pinions & gears

FY10 Motor Gear 13T Modul 0,8

only available from customer service

Carson FY10 Motor Gear 13T Module 0.8, item no. 500405300, is the motor gear kit for DESTROYER and DFFY in 1/10 scale. The 13-tooth gear in module 0.8 fits directly into the 1/10 drive group. Model builders and tuning enthusiasts appreciate this targeted spare part solution for restoring or upgrading their vehicles.

Axles & drive shafts

FY10 Rear Drive Shaft

only available from customer service

Carson 500405294 FY10 Rear Drive Shaft Kit is the rear drive shaft kit for the DESTROYER DFFY 1/10 and serves as a suitable replacement for the rear axle. Model building enthusiasts and ambitious hobbyists receive a specific spare parts set for repairing or restoring their 1/10th scale Destroyer and for precise integration into the chassis.

Wishbones

FY10 Rear Lower Suspension Arm l + r

only available from customer service

DESTROYER, DFFY 1/10 REAR LOWER SUSPENSION ARM L/R KIT

Screws

FY10 Screw Pin, 12 pcs

only available from customer service

Carson FY10 screw pins 500405285 (12 pieces) are the original spare parts kit for the DESTROYER DFFY 1/10. Model building enthusiasts receive a complete replacement set with the twelve screw pins, ideal for repairing or refreshing worn connections. This allows you to quickly restore the operational readiness of your 1/10th scale Destroyer.

Additional spares

FY10 Servo Saver Unit Kit

only available from customer service

Carson FY10 Servo Saver Unit Kit (500405271) is a custom-fit kit for enthusiasts that has been specially developed for the Destroyer DFFY 1/10. As a complete kit, it provides all components for integrating the servo saver unit and enables precise customization and targeted repairs on the model.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

FY10 Shock Absorber-Set, 2 pcs

only available from customer service

Carson FY10 shock absorber set 500405290 is a two-piece kit with two shock absorbers for DESTROYER and DFFY in 1/10 scale. Model builders receive a suitable spare parts package for repair, maintenance or replacement of their 1/10 scale models and ensure the operational readiness of the vehicle. Ideal for enthusiasts looking for original parts.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

FY10 Spoiler bracket

only available from customer service

Wishbones

FY10 Steering arm front left+right, 2pcs

only available from customer service

500405261 Carson FY10 steering arm set for DESTROYER/DFFY 1:10 combines left and right in a practical two-piece kit and offers model builders precise steering and a robust connection to the front and rear axles. The precisely fitting arms enable uncomplicated replacement and restore exact steering characteristics for ambitious racers.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

FY10 Steering Linkage Set, 2 pcs

only available from customer service

Carson FY10 Steering Linkage Set 500405270 - Steering linkage set, 2 pieces, KIT for DESTROYER DFFY 1/10. Specially designed for the 1:10 model, the kit contains two steering rods and is clearly labeled as an accessory for the Destroyer. The product is therefore aimed directly at model builders who require suitable components.

Additional spares

FY10 Steering Servo Horn and Linkage

only available from customer service

Carson FY10 Steering Servo Horn and Linkage (material number 500405272) is a kit for the steering servo linkage of the DESTROYER DFFY 1/10. The set contains the appropriate parts for the steering wheel arm and linkage and is aimed at model builders who want to make original spare parts and precise repairs to their 1/10th scale vehicle.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

FY10 Top cover set

only available from customer service

Axles & drive shafts

FY10 Truggy Axle with Pin

only available from customer service

Carson FY10 truggy axle with pin 500405436 is a kit part for the DESTROYER FY 1/10T (FY 10T) and provides the right axle component for your model. Specially adapted to the FY10 chassis, this axle set is aimed at truggy enthusiasts who are looking for an original spare part for replacement and repair.

RC chassis & attachments

FY10 Upper Deck

only available from customer service

Carson FY10 Upper Deck 500405292 is the upper deck kit for the 1:10 DESTROYER (DFFY) and is aimed at model building enthusiasts who are looking for stability and dimensional accuracy. The precision-manufactured kit enables precise replacement or upgrading of the model, simplifies assembly and restores the original geometry of your vehicle.   Warning! Not suitable for children under 14 years.

Wishbones

FY10 Upper Suspension Arm, 2 pcs

only available from customer service

500405255 - FY10 upper suspension arms (2 pieces) from Carson for DESTROYER/DFFY 1:10 offer model building enthusiasts a practical replacement and upgrade kit. The two upper suspension arms enable the targeted replacement of worn parts and ensure that the suspension geometry is restored true to the original; ideal for repair and maintenance.

Additional spares

FY10/8/5 Chassis Front

only available from customer service

500405268 Carson FY10/8/5 Chassis Front is the front chassis kit for the DESTROYER DFFY 1/10. Enthusiasts get an original Carson component, specifically compatible with the 1:10 DFFY models. The kit offers a clear replacement or exchange solution for drivers who prefer original components.   Warning! Not suitable for children under 14 years.

Pinions & gears

FY10/8/5 Diff. Outdrive

only available from customer service

The Carson Diff-Outdrive-Kit 500405279 for Destroyer DFFY 1:10 (FY10/8/5) is a complete Diff-Outdrive replacement kit, precisely matched to the 1:10 model. Model building enthusiasts will appreciate this precisely fitting kit, which allows the diff components to be replaced and restores the vehicle's operational readiness.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

FY10/8/5 Front bumber

only available from customer service

500405256 - FY10/8/5 Front bumber from Carson: This front bumber kit for the DESTROYER DFFY 1/10 is aimed at model building enthusiasts who are looking for a replacement or a striking upgrade for the front of the vehicle. As a complete set, it is precisely matched to the 1:10 format and ideal for restoring or individualizing your model.   Warning! Not suitable for children under 14 years.

Wishbones

FY10/8/5 Front Suspension Arm Pin, 8 pcs

only available from customer service

The FY10/8/5 Front Suspension Arm Pin 500405267 is an 8-piece set of front suspension pins, specially designed as a repair and replacement kit for DESTROYER DFFY 1/10. Model builders use the kit to replace defective front suspension pins and to restore the suspension so that your model remains ready for use.   Warning! Not suitable for children under 14 years.

Additional spares

FY10/8/5 Hub Rear Carrier l + r

only available from customer service

Carson 500405273 FY10/8/5 Hub Rear Carrier L+R Kit is aimed at model builders and offers the original rear axle carriers left and right for the DESTROYER DFFY in scale 1:10. The set contains both sides as a kit and enables targeted repair or replacement on this model - ideal for precise repair and continued operation.

Wishbones

FY10/8/5 Lower Suspension, front/rear

only available from customer service

500405269 - Lower suspension (front/rear), kit for DESTROYER DFFY 1/10. This complete set replaces the lower suspension parts of your Destroyer model and is specifically designed for the front and rear suspension of the 1/10 vehicle mentioned. Model builders benefit from a specially coordinated spare parts package for professional repair and maintenance.   Warning! Not suitable for children under 14 years.

Wishbones

FY10/8/5 Rear Suspension Arm Pin, 4pcs

only available from customer service

Carson FY10/8/5 Rear Suspension Arm Pin Kit 500405275 is a set of four rear suspension pins, especially for DESTROYER and DFFY 1/10 models. The kit serves as a spare part for the rear suspension and enables targeted repairs or replacement on the rear wishbones - a useful part for model building enthusiasts.   Warning! Not suitable for children under 14 years.

Screws

FY10/8/5 Screw-Set

only available from customer service

Carson 500405276 FY10/8/5 screw set for Destroyer DFFY 1:10 is a complete kit with six group screws, especially for use on this 1:10 model. Model building enthusiasts will appreciate the precision-fit addition for the maintenance and repair of their chassis; an inconspicuous, yet important spare part.   Warning! Not suitable for children under 14 years.

Wishbones

FY10/8/5 Suspension Arm Mount, 2 pcs

only available from customer service

Carson FY10/8/5 Suspension Arm Mount 500405257 is a 2-piece suspension mounting kit specially designed for DESTROYER and DFFY 1/10 models. As a spare part or upgrade, the set provides two suspension arm mounts and supports ambitious model builders in repair, maintenance or targeted tuning to restore the suspension function exactly.   Warning! Not suitable for children under 14 years.

Wishbones

FY10/8/5 Upper Suspension Arm Mount f/r

only available from customer service

The Carson 500405258 Upper Suspension Mount - Kit for FY10/8/5 models and DESTROYER DFFY 1/10 is a precision manufactured replacement part for mounting the front and rear upper suspension arms. It provides a snug fit, facilitates assembly and repair, and allows modelers to make safe, precise suspension upgrades.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

FY5 Wing + Body + Decal

only available from customer service

Carson DESTROYER DFFY 1/5 (500800073) Wing+Body+Decal-Kit offers model builders a complete body and styling package for the 1/5th scale DFFY. Wing, body and high-quality decals are perfectly matched, easy to fit and give your vehicle a striking look and an instant upgrade. Ideal for repairs or customizing.

RC chassis & attachments

FY8 2.0 body/spoiler/decor

only available from customer service

Body kit incl. spoiler and stickers  Warning! Not suitable for children under 14 years.

Axles & drive shafts

FY8 Center Drive Shaft, rear

only available from customer service

Carson FY8 Center Drive Shaft 500405321 is the rear drive shaft kit for DESTROYER DFFY 1/8 models. The component supplied as a kit enables the targeted replacement or repair of the rear center drive shaft, offers clear compatibility with the 1/8 DESTROYER and is aimed at hobbyists and experienced mechanics for precise restoration of the drive function.

Additional spares

FY8 Destroyer chassis

only available from customer service

Axles & drive shafts

FY8 Destroyer Driving diff. gear set

only available from customer service

The 500405325 FY8 Destroyer Driving diff. gear set from Carson is a kit that allows modelers to assemble the drive differential of their FY8 Destroyer themselves. Specially designed for installation and repair, this kit will appeal to hobbyists who want to assemble and adjust components themselves.

Additional spares

FY8 Diff. Outdrive Pin + Body Post

only available from customer service

The Carson 500405339 FY8 Diff. Outdrive Pin + Body Post is a precision replacement parts kit for the FY8 differential range and replaces the original components with the part number 500405266. Modelers appreciate the exact fit and easy installation because this set restores the reliability and driving stability of the drive and minimizes downtime. A must for anyone who wants to maintain performance and original fidelity.

Wishbones

FY8 Front Suspension Arms l/r (2)

only available from customer service

Carson FY8 Front Suspension Arms 500405313 are a set for the front axle (left/right, 2 parts) and are considered a replacement kit for the DESTROYER DFFY 1/8. Model building enthusiasts thus receive a precisely fitting replacement of damaged suspension parts to repair the vehicle true to the original. Ready for the next mission.   Warning! Not suitable for children under 14 years.

Pinions & gears

FY8 Motor Gear 15 T Modul 1

only available from customer service

Carson 500405322 - FY8 motor pinion 15 teeth, module 1 is a motor gear kit for the DESTROYER and DFFY 1/8 models. For passionate model builders, this replacement pinion is a perfect solution for repairing the drive, facilitates maintenance and repair on the 1:8 drive and ensures reliable function.   Warning! Not suitable for children under 14 years.

Wishbones

FY8 Rear Suspension Arm l/r (2)

only available from customer service

500405331 Carson FY8 Rear Suspension Arms (L/R) - Kit for DESTROYER DFFY 1:8. This kit contains 2 rear suspension arms (left and right) as replacement or exchange kit for the mentioned 1:8 models. Ideal for model builders who need original compatible components for their DESTROYER DFFY. Suitable for FY8 models.

Screws

FY8 Screw Set

only available from customer service

500405336 FY8 screw kit from Carson is a compact screw kit for model builders, specially designed for the 1:8 scale models DESTROYER and DFFY. The kit facilitates targeted repairs and maintenance on your models and offers enthusiasts a practical, custom-fit solution for quick repairs and reliable operational readiness.   Warning! Not suitable for children under 14 years.

Screws

FY8 Screw Set

only available from customer service

FY8 screw set 500405337 from Carson is a complete screw kit for the 1/8 models DESTROYER and DFFY. Model building enthusiasts will find the right parts kit for assembly, maintenance and targeted replacement; precisely matched to these model series and ideal for maintaining the original function.

Screws

FY8 Screw Set

only available from customer service

Carson FY8 screw set 500405340 is the practical replacement and maintenance kit for the DESTROYER DFFY in 1/8 scale. Model builders appreciate the compact set for secure attachment and quick repair on the vehicle. Precisely manufactured for precise replacement, the set makes servicing work easier and prolongs the enjoyment of using your model.

Additional spares

FY8 servo saver linkage

only available from customer service

RC shock absorbers & damper bridges

FY8 Shock Absorber Unit (2)

only available from customer service

Carson FY8 shock absorber unit 500405312 in a kit of 2 is an original spare part for the 1:8 scale models DESTROYER and DFFY. The two units supplied are specially designed for these vehicles and enable uncomplicated replacement to repair the chassis - ideal for model building enthusiasts.   Warning! Not suitable for children under 14 years.

Additional spares

FY8 Side Quard l/r

only available from customer service

Carson FY8 Side Quard l/r (500405316) is a kit with left and right side protection plates for the DESTROYER DFFY in 1:8 scale. This accessory appeals directly to model builders: it authentically complements the vehicle appearance, enables targeted restoration of damaged side sections and is specially designed for the 1:8 models mentioned.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

FY8 spoiler bracket

only available from customer service

Axles & drive shafts

FY8 Steering linkage, 2 pcs

only available from customer service

Carson FY8 steering linkage set of 2 500405324 is a replacement kit with two steering linkages for DESTROYER and DFFY in 1/8 format. The set is aimed at model builders and enthusiasts who are looking for suitable parts for maintenance, repair or as a stock item. The components are specially designed for the models mentioned and are ready for immediate use.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

FY8 Transverse Drive Shaft l/r (2)

only available from customer service

Carson FY8 transverse drive shafts 500405318 (left/right, kit of 2) are precision-fit spare parts for use on the DESTROYER DFFY 1/8. This set contains two transverse drive shafts for the specific repair or replacement of components on your model and is aimed at enthusiasts who value original compatibility and precise components.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

FY8 Transverse Drive Shaft, front

only available from customer service

500405320 FY8 Transverse Drive Shaft front is the front center drive shaft kit for the DESTROYER DFFY 1/8. As a precisely fitting component for the 1:8 Destroyer model, it enables direct integration into the FY8 model and is supplied as a complete kit. Model builders appreciate the simple assembly when replacing or converting the drivetrain.

Wishbones

FY8 Upper Suspension Arm (2)

only available from customer service

500405327 - FY8 Upper Suspension Arm (2) from Carson is a two-piece kit with upper wishbones for DESTROYER DFFY 1/8. For targeted replacement or performance upgrades, it restores the suspension geometry and ensures controlled handling. Model builders appreciate the precise fit and uncomplicated installation.

Additional spares

FY8/10 C-Carrier front left/right

only available from customer service

Carson 500405377 - FY8/10 C-Carrier front left/right is a complete set for DESTROYER DFFY 1/8 models and enables the exact replacement of the front wheel carriers. Precisely manufactured and supplied as a kit, it ensures reliable guidance and restoration of the chassis function for ambitious model builders.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

FY8/10 Knuckle arm left/right

only available from customer service

Carson FY8/10 Knuckle Arm left/right (500405379) is an original spare part for model builders and enables the specific replacement of the left or right knuckle arm components. As an approved replacement for part number 500405323, it is suitable for repair, overhaul and maintenance of FY8/10 projects.   Warning! Not suitable for children under 14 years.

Additional spares

FY8/5 battery box and cover

only available from customer service

Pinions & gears

FY8/5 Center Differential Unit, complete

only available from customer service

500405319 Carson FY8/5 Center Differential Unit complete: This complete center differential kit is specially designed for the DESTROYER DFFY 1/8 and provides all the necessary components for direct use. Model building enthusiasts appreciate the original spare part quality for precise replacement and long-lasting operational readiness.   Warning! Not suitable for children under 14 years.

Pinions & gears

FY8/5 Driving Diff. Gear Set, complete

only available from customer service

Carson FY8/5 Driving Diff. Gear Set complete (500405326) is a complete gear set kit for the DESTROYER DFFY 1/8. Model builders receive a precisely fitting replacement set for repairs or upgrades, which ensures reliable power transmission and constant performance. This allows driving behavior and operational readiness to be restored.   Warning! Not suitable for children under 14 years.

Additional spares

FY8/5 Upper Deck, front

only available from customer service

Carson 500405315 - FY8/5 Front Upper Deck Kit for DESTROYER DFFY 1/8th This original replacement kit is aimed at model builders and collectors who want to complete or replace their 1/8th scale DESTROYER. Compact front deck supplied as a kit to restore the design of your model. A must for owners of the DESTROYER DFFY 1/8.   Warning! Not suitable for children under 14 years.

Additional spares

Gear Box front/rear CV-10

only available from customer service

Carson 500105286 CV-10 front/rear gear case is a Carson replacement part and serves as a replacement for part number 500105112. Modeling enthusiasts will benefit from a clear replacement option to quickly repair their CV-10 drivetrain and restore it to stock function.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

KOD Anti roll bar front

only available from customer service

Carson KoD front stabilizer set 500405891 is the precisely fitting anti-tip stabilizer set for KoD models and was designed for precise tuning of the front axle. Specially manufactured, it fits the 500202020 and 500409063 models and is suitable for both repairs and targeted tuning adjustments.

Axles & drive shafts

KOD Anti roll bar rear

only available from customer service

Carson KOD rear stabilizer bar set 500405901 is the original rear stabilizer bar set for KOD models and fits vehicles with the model numbers 500202020 and 500409063. Model builders appreciate the precisely fitting solution for precise repairs or targeted retrofitting of the chassis. Ideal as a spare part or upgrade for maintenance and repair.

Additional spares

KOD BL Battery holder Set

only available from customer service

Carson KoD BL battery holder set 500405912 is the original holder set for KoD BL models and is compatible with the vehicle 500409063. Model builders, screwdrivers and collectors appreciate it as a precisely fitting replacement for the targeted repair or replacement of the battery holder in order to precisely restore the operational readiness of the model.

Axles & drive shafts

KOD BL Center drive shaft (2)

only available from customer service

Carson KoD BL center drive shafts 500405910 (2 pieces) are center drive shafts for KoD BL models. The set is aimed at model building enthusiasts who are looking for original Carson components to renew the center drive unit of their KoD BL models or to keep on hand as a spare part. Available as an original spare part.

Additional spares

KOD BL Chassis

only available from customer service

Carson KoD BL Chassis 500405906 is the original KOD BL chassis plate for modelers looking to repair, replace or specifically upgrade their KoD BL. This precision-fit spare part allows the exact restoration of the chassis base and is aimed at enthusiasts who rely on original parts and precise compatibility.

Pinions & gears

KOD BL Piniongear 16T

only available from customer service

Carson KOD BL motor pinion 16Z (500405908) is the 16-tooth motor pinion for KOD BL models. This specific spare part allows the drive gear to be replaced in order to restore the original transmission ratio and function. This provides model building enthusiasts with a clear component for repair, maintenance and fine-tuning.

Additional spares

KOD BL Velcro battery holder (2)

only available from customer service

Carson KOD BL Velcro battery holder 500405911 (2) are original Velcro battery holders for KOD BL models. Scope of delivery: two pieces. Suitable for the model 500409063. A practical replacement and accessory part for model builders who value compatible battery mounting. Compatible, original and ready to use - a clever choice for ambitious model builders.

Additional spares

KOD Chassis brace set and Body-mount

only available from customer service

500405892 Carson KOD Chassis Brace Set with Body Mount contains the front and rear chassis braces for KOD models. This provides model building enthusiasts with a targeted solution for stabilizing and mounting the body; ideal for maintaining precise chassis geometry and bodywork and keeping the KOD vehicle ready for long-term use.

Axles & drive shafts

KOD Dog bone rear (2)

only available from customer service

The Carson 500405903 KOD rear drive shafts (2) are a set of 2 replacement drives for the rear axle of KOD models. Model building enthusiasts appreciate them as a suitable spare part for the targeted replacement of worn parts in order to reliably put the vehicle back into operation. Original from Carson for repairs true to series production.

Replacement & spares for combustion models

KOD GP Brake Caliper

only available from customer service

The Carson KOD GP Brake Caliper 500205987 is the right brake system for KOD GP models and is compatible with the model 500202020. This provides model builders with a spare part for repairing and maintaining their models; clear compatibility information facilitates selection and installation. Kompatibilitätsangabe: 500202020

Additional spares

KOD GP Center Differential support

only available from customer service

Carson KOD GP center differential bracket 500205986 is the matching bracket for the center differential, developed for the model 500202020. Model building enthusiasts will find an original spare part here for the exact restoration and targeted maintenance of the drive unit, which ensures a precise fit and reliable function.

Axles & drive shafts

KOD GP Center Drive Shaft

only available from customer service

500205988 Carson KOD GP Center Drive Shaft - the center drive shaft for KOD GP models, developed as a precise spare part for ambitious model builders. It ensures reliable power transmission between the engine and wheels, simplifies repair and maintenance and ensures long-lasting performance in use.

Additional spares

KOD GP Chassis

only available from customer service

The KoD GP Chassis 500205985 from Carson is the original chassis plate for KoD models and appeals to model building enthusiasts who rely on original components. Suitable for replacement or repair, this chassis plate allows you to restore the factory configuration of your model and provides a seamless replacement.

Replacement & spares for combustion models

KOD GP Clutch Kit complete

only available from customer service

The KOD GP clutch set complete (500205993) from Carson offers a complete clutch set for KOD GP. Model building enthusiasts will find here a complete set for faithfully renewing the clutch, ideal for restoring the drive system to the manufacturer's specifications and operating it precisely.

Replacement & spares for combustion models

KOD GP Clutch Nut

only available from customer service

Carson KOD GP clutch nut 500205994 is the original spare part for your KOD GP model and is aimed at model building enthusiasts who value precisely fitting components. This clutch nut enables the correct connection within the clutch unit and facilitates targeted maintenance or the targeted replacement of defective parts.

Replacement & spares for combustion models

KOD GP Filter Set

only available from customer service

500205995 KoD GP air filter set from Carson is the complete air filter replacement for KoD GP models and contains all components as one set. Specially developed for model builders, this complete package offers a clear, compatible solution for filter replacement on KoD GP vehicles and ensures uncomplicated replacement and spare parts maintenance.

Replacement & spares for combustion models

KOD GP Motor Mounts

only available from customer service

The Carson 500205992 KOD GP engine mounts made of aluminum are a perfect fit for the 500202020 model and provide the necessary mounting base for the engine. For model building enthusiasts who value original spare parts, they ensure simple installation and reliable integration into the chassis. A high-quality original part from Carson that delivers confidence in function and fit.

Additional spares

KOD GP Receiver/Servo mount

only available from customer service

Carson KOD GP receiver/servo bracket 500205989 is the custom-fit bracket for your KOD GP setup and is expressly compatible with the model 500202020. For model building enthusiasts, this spare part offers a clear solution for the targeted replacement of receiver and servo, so that repair and reconditioning can be carried out with precision.

Axles & drive shafts

KOD GP Steering Linkage

only available from customer service

Carson KoD GP steering linkage (500205991) is the original spare part for your KoD GP model and ensures precise steering movements and reliable control. Model building enthusiasts appreciate the precision-fit design for repairs or upgrades, which restores controlled driving behavior and maintains driving fun in the long term.

Replacement & spares for combustion models

KOD GP Throttle Linkage

only available from customer service

Carson KoD GP throttle/brake linkage 500205990 is the precise replacement linkage for ambitious model builders. It takes over the throttle and brake control and is specially designed for the model 500202020. Ideal for quick replacement during repairs or upgrades to reliably restore steering and driving behavior.

Screws

KOD Screw Set

only available from customer service

The Carson KoD screw set 500405917 is a set of fastening elements for assembly and repair specially compiled for KoD models. Model building enthusiasts can use it to precisely connect their KoD parts and continue the assembly or repair process without compromising on originality.

Additional spares

KOD Servosaver-Unit

only available from customer service

Carson KoD servo saver unit 500405897 is the perfect spare part for KoD models that combines precision and reliability. Enthusiasts benefit from simple installation and a robust design that protects the servo mechanism in everyday modeling and maintains steering precision. Indispensable for targeted repairs and maintaining performance.

Additional spares

KOD Sideguard (2)

only available from customer service

Carson KoD side protection 500405905 (2 pieces) is an original chassis protection for KoD models and offers the right solution for replacing or refreshing damaged side panels. Compatible with the 500202020 and 500409063 models, it is aimed at model building enthusiasts looking for precision-fit parts.

Additional spares

KOD Steering linkage (2)

only available from customer service

The KOD tie rod set 500405899 from Carson (2 pieces) is a precisely fitting spare part for precise steering movements and the exact restoration of the driving function. Especially suitable as a replacement for the models 500202020 and 500409063, it allows model builders to carry out simple repairs or targeted upgrades to ensure steering precision.

RC chassis & attachments

KOD Wing mount posts kit

only available from customer service

Carson KoD Wing mount posts kit 500405904 is the original spoiler mount for KoD models and is aimed at discerning model builders who are looking for specific spare parts. The set is suitable for the models 500202020 and 500409063 and enables direct replacement to restore the standard spoiler mounting of your model.

Pinions & gears

Main gear CV-10B/ T (2)

only available from customer service

500105173 Carson CV-10B/T 46T main gear (2 pieces) is aimed at model building enthusiasts who are looking for an original spare part. The two-piece main gear ensures correct gearing and reliable power transmission in the drive. A precise, accurately fitting component for quick repair or replacement.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Main gear shaft + joint set CV -10

only available from customer service

Carson Main gear shaft + joint set CV-10 (500105131) is aimed at model building enthusiasts who are looking for a precise set for the CV-10 series. This compact Main gear shaft & joint set combines main shaft and joint parts for CV-10 models and offers collectors and hobbyists a true-to-original spare part from the Carson brand.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Manifold sealing (5) Force

only available from customer service

Carson Force manifold gasket 500902078 - 5 pieces is a compact spare parts set for model building enthusiasts that enables precise replacement and targeted maintenance. Five original Force manifold gaskets provide a reliable supply for quick repairs and ensure clean, professional repair of your model.   Warning! Not suitable for children under 14 years.

RC chassis & attachments

MB X-Class body (MC-10)

only available from customer service

Additional spares

Mid-differential holder set CV -10

only available from customer service

500105117 Mid differential bracket set for CV-10 from Carson offers model building enthusiasts the right spare part for mounting the center differential in the CV-10 drive. The set enables targeted replacement or repair, restores the function and preserves the original compatibility as well as the operational readiness of your model.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Oil shock absorber set (2) CV- 10B, rear

only available from customer service

Carson oil shock absorber set 500105162 for CV-10B (rear, 2 pieces) is the perfect replacement solution for the rear axle of your model. The set makes it easy to replace defective shock absorbers, restores the damping effect and ensures controlled handling. Model building enthusiasts appreciate the quick installation and reliability.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Oil shock absorber set (2) CV-10B, front

only available from customer service

Carson oil shock absorber set 500105163 for front (2x) - specially designed for the CV-10B. This shock absorber set provides precisely tuned replacements for the front axle and is ideal for replacing damaged or worn parts. Model builders appreciate the precision-fit solution to restore handling and reliability.

Replacement & spares for combustion models

Pull Cord Starter, w/o Flange

only available from customer service

Carson Force Flangeless Pull Starter 500054648 is the precisely named pull starter for your model, clearly labeled as flangeless and offered by Carson. Model building enthusiasts benefit from the clear material number for easy identification and targeted replacement; this spare part simplifies ordering and parts management for repair and maintenance.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Rear Dogbone (2) + Drive Cup

only available from customer service

500405449 Carson Rear Dogbone (2) + Drive Cup are original spare parts consisting of two rear dogbones and a drive cup unit. Model builders appreciate the parts for repairing or upgrading the drivetrain, as they provide a complete set of precisely fitting components for the rear axle. A useful replacement set for model builders.   Warning! Not suitable for children under 14 years.

Additional spares

Rod set throttle/ brake CV-10

only available from customer service

500105157 Rod set throttle/brake CV-10 from Carson describes the rod set for throttle and brake control of the CV-10 and is aimed at model building enthusiasts who are specifically looking for this spare part. Clearly labeled as a rod set for CV-10, it makes it easier to find in the Carson spare parts section.

Additional spares

Rudder St. Tropez/ Sunset

only available from customer service

Carson rudder 500109016 for St. Tropez/Sunset made of metal is the perfect solution for demanding model builders, combining robustness and precise steerability. Specially adapted to the models mentioned, it guarantees an exact fit, long-lasting function and facilitates the professional restoration or upgrading of your model.   Warning! Not suitable for children under 14 years.

Screws

Screw set CV-10B/ T (2)

only available from customer service

The Carson screw set CV-10B/T 500105172 is a set of two screws (CV-10B/T) for model making. Model building enthusiasts appreciate this compact set as an addition to the workshop: clearly labeled, space-saving and practical for quick replacement. In everyday use, it impresses with its clarity and uncomplicated use for minor maintenance work.

Additional spares

Servo saver set CV-10

only available from customer service

Carson Servo saver Set CV-10 (500105123) is aimed at model building enthusiasts who are looking for a suitable replacement or upgrade part for CV-10 models. As a special set for the servo saver, it serves to protect sensitive components, supports precise steering impulses and is a sensible investment to maintain the value and reliability of your model.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Shaft for suspension arm 8x

only available from customer service

Carson 500105293 - Shaft for suspension arm (8x) offers model building enthusiasts perfectly fitting replacements for worn axle parts. Precisely manufactured, it ensures stable suspension and reliable function of the chassis components. Easy to install, ideal for maintaining or optimizing your models.   Warning! Not suitable for children under 14 years.

Wishbones

Shaft for suspension arm x8 CV/CE-10

only available from customer service

500405147 - Carson shaft for wishbone X8 CV/CE-10 is the precise spare part for model builders who rely on an exact fit and high load capacity. Robustly manufactured, it guarantees secure fastening and smooth axle movements, facilitates assembly and restores the reliable function of the chassis.   Warning! Not suitable for children under 14 years.

Wishbones

Shaft for wishbone mounting (8) CV-10B/T

only available from customer service

Carson 500105184 - Shafts for wishbone mounting (8) for CV-10B/T offer model builders precisely fitting spare parts for buggies and truggies. Eight identical shafts make it easy to replace the suspension connections and ensure stable function and long-term readiness for use. For enthusiasts who value precision and reliability.

RC shock absorbers & damper bridges

Shock absorber set (2) CV-10

only available from customer service

500105126 - Carson CV-10 shock absorber set (2): This set contains two CV-10 shock absorbers and is aimed at model building enthusiasts who are looking for suitable accessories for their CV-10 projects. Brand quality from Carson in a compact design, ideal as a targeted addition or replacement part for your model. Perfect for CV-10 fans.

RC shock absorbers & damper bridges

Shock tower front/ rear (2)

only available from customer service

Carson shock absorber carrier 500105171 for front and rear (2) is an original spare part for buggy and truggy. As a shock absorber carrier, it allows the targeted replacement of damaged parts and the restoration of the suspension function. Model builders appreciate the simple installation and precise fit.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Shock tower set CV/CE-10, tightend

only available from customer service

Carson Shock-Tower-Set CV/CE-10 (500405144) is the tight-end kit for demanding model builders who want to specifically maintain or optimize their CV/CE-10. The set includes the matching shock tower mounts for the CV/CE-10 and is aimed at enthusiasts who prefer original spare parts. Ideal for CV/CE-10 models.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Shock tower set f/r (2) CV-10

only available from customer service

Carson CV-10 shock absorber bridge set (500105139) includes the two parts for the front and rear (2 pieces) and fits the CV-10. For model building enthusiasts, this set offers a practical solution for replacing or upgrading the shock absorber mounts so that the CV-10 can be specifically repaired or modified.   Warning! Not suitable for children under 14 years.

RC shock absorbers & damper bridges

Shocktower set front/rear CV-10 On-Road

only available from customer service

Carson Shocktower Set 500105289 for CV-10 On-Road brings front and rear mounts in original form and is aimed at model builders who demand precision and reliable spare parts. The precisely fitting components facilitate maintenance and repair, maintain chassis geometry and performance and are ideal for exact restoration.   Warning! Not suitable for children under 14 years.

Additional spares

Spring retainer (4) CV-10

only available from customer service

Carson 500105159 Spring retainers (4) for CV-10 are a precise spare parts set for dedicated model builders. The four holders secure the spring attachment to the CV-10, facilitate maintenance, repair and targeted upgrades and thus ensure reliable function. Precisely manufactured, they guarantee reliability and fidelity to the original of your model.

Additional spares

Steering rod set (5) CV-10

only available from customer service

Carson 500105116 Steering linkage set (5) for CV-10 is aimed at model building enthusiasts who want to professionally maintain, repair or fine-tune their CV-10. Five steering rods as suitable replacements enable quick replacement and targeted optimization of the steering so that your model is ready for use again.

Axles & drive shafts

Steering rod set CV-10B/T (5)

only available from customer service

Carson CV-10B/T Steering Rod Kit (500105170) includes five parts and is specifically designed for CV-10B/T models. Modeling enthusiasts will find specific replacement components for replacing and repairing the steering, a practical solution for service and restoration, ideal for those who prefer original Carson parts.   Warning! Not suitable for children under 14 years.

Wishbones

Suspension arm 2x2 CV/CE-10

only available from customer service

500405141 Carson Suspension Arm 2x2 CV/CE-10 is a custom-fit replacement and upgrade part for CV/CE-10 models in TIIGHTEND design. Model building enthusiasts appreciate the precise guidance of the wheel suspension, simple installation and the possibility of restoring the handling and durability of their chassis in a targeted manner.   Warning! Not suitable for children under 14 years.

Wishbones

Suspension arm-set front/rear CV-10

only available from customer service

Carson 500105287 - Suspension arm set for front and rear axle of the CV-10 combines functionality and replacement convenience for model building enthusiasts. As a direct replacement for the part number 500105114, it enables targeted replacement during repair or upgrade and helps to maintain the handling and operational readiness of your model.   Warning! Not suitable for children under 14 years.

Wishbones

Suspension holder set CV Buggy

only available from customer service

Carson Suspension Holder Set CV Buggy (500105290) is aimed at model building enthusiasts who want to work precisely on the suspension of their CV Buggy. The CV Buggy Suspension Holder Set serves as a replacement and equipment component for maintenance, repair or targeted conversion and facilitates plannable, clean interventions on the chassis.

Ball bearings

T3-01 Chassis Ball bearing set (10)

only available from customer service

Carson 500904061 - Ball bearing set for T3-01 chassis (10 pieces) is the complete spare part for the Tamiya T3-01 (Dancing Rider). The set contains ten ball bearings and is suitable for the T3-01 chassis. Model building enthusiasts use it specifically for replacement, repair, maintenance or overhaul.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Upright set front/ rear left/ right C

only available from customer service

Carson 500105120 Upright Set C (front/rear, left/right) for CV-10 is a complete replacement set for modeling enthusiasts that covers all four positions. Ideal for specific repairs or upgrades to the CV-10, it allows you to replace affected parts and get your model back in action quickly.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

V4 Truggy Anti Roll Bar front

only available from customer service

Carson V4 Truggy Anti Roll Bar front (500405815) is the front stabilizer element for the V4 Truggy and is aimed at demanding model builders. As a specific component for the front axle, it optimizes cornering behavior and reduces body roll, ensures more precise handling and restorable performance.

RC chassis & attachments

V4 Truggy Body Holder Set

only available from customer service

Carson 500405809 V4 Truggy Body Holder Set is a precisely crafted mounting set for Truggy V4 models and is aimed at demanding model builders who value a snug fit for the bodywork. Specially developed for remote-controlled ground vehicles, it facilitates assembly, maintenance and tuning, ensures a secure, low-vibration hold and blends in unobtrusively with the vehicle's appearance.

Pinions & gears

V4 Truggy Centre Differential

only available from customer service

The Carson 500405806 V4 Truggy Center Differential is a central drive component specially designed for V4 Truggy models and is aimed at model building enthusiasts who carry out targeted maintenance, replacement or modifications to remote-controlled ground vehicles. It enables integration into the drivetrain and supports controlled driving behavior during conversions.

Additional spares

V4 Truggy Chassis front & real Brace

only available from customer service

Carson V4 Truggy Chassis front & real Brace (500405830) is the specified component for the V4 Truggy chassis from Carson. Model building enthusiasts will find the right component here to complete the front and real areas of their truggy and keep the chassis true to detail - ideal for careful construction and restoration work.

RC shock absorbers & damper bridges

V4 Truggy Damper Set (4)

only available from customer service

Carson V4 Truggy Damper Set 500405820 presents itself as a damper set (4 pieces) from Carson, intended as a replacement and accessory part for remote-controlled, powered ground vehicles. Model building enthusiasts and tuning fans use it for maintenance, repair or individual setup; the material number facilitates ordering and allocation in the accessories range.

Pinions & gears

V4 Truggy Diff front/real

only available from customer service

Carson V4 truggy differential 500405805 (front/real) is the original spare part for V4 truggy models and is aimed specifically at model building enthusiasts. The differential for front and real use enables targeted replacement during maintenance or repair and provides a custom-fit solution when original components are required.

Pinions & gears

V4 Truggy Driving Diff. Gear Set

only available from customer service

The Carson V4 Truggy Driving Diff. Gear Set (500405807) is a gear set as a spare part for V4 Truggy models and is aimed at model building enthusiasts who want to replace specific wearing parts or repair their vehicle. The set contains the gears required to rebuild the drive function and simplifies repairs.

Axles & drive shafts

V4 Truggy Front Drive Shaft

only available from customer service

Carson V4 Truggy Front Drive Shaft (500405812) is the precision-machined front drive shaft for the V4 Truggy. Model building enthusiasts appreciate this precisely fitting Carson spare part solution, which is easy to install and offers reliable power transmission. Ideal for quickly restoring the performance, driving stability and operational readiness of your model.

Wishbones

V4 Truggy Lower Suspension Mounts

only available from customer service

Carson V4 Truggy Lower Suspension Mounts (500405808) are the lower mounting points for the wheel suspension of the V4 Truggy. This provides model building enthusiasts with a specific spare part for maintenance or for replacing damaged parts. This allows the suspension to be maintained in a targeted manner and ensures the operational readiness of the V4.

Pinions & gears

V4 Truggy Pinion Gear

only available from customer service

Carson V4 Truggy Pinion Gear (item number 500405823) is the precise replacement and upgrade gear for Truggy enthusiasts and hobby racers. As an original Carson component, it ensures smooth power transmission, maintains the performance of your model and facilitates targeted maintenance. A reliable spare part for ambitious model building.

Axles & drive shafts

V4 Truggy Real Drive Shaft

only available from customer service

Carson V4 Truggy Real Drive Shaft (500405813) is a drive shaft for V4 Truggy models and part of the Carson range of remote-controlled ground vehicles. This component for powered/radio remote control models appeals to model building enthusiasts who are specifically looking for suitable components for maintenance and construction.

Screws

V4 Truggy Screw Set

only available from customer service

Carson V4 truggy screw set 500405833 is the compact spare parts package for demanding model builders who want to reliably maintain or repair their V4 truggy. Precisely manufactured, it offers a perfect fit for replacing worn fasteners and contributes to the long-lasting function and stability of your vehicle.

RC shock absorbers & damper bridges

V4 Truggy Shock Tower Set

only available from customer service

500405810 Carson V4 Truggy Shock Tower Set is a spare part for model builders who want to repair or upgrade their V4 Truggy. The set provides precisely fitting supports for the shock absorbers of the truggy and is aimed at enthusiasts who appreciate quality and original accessories. Perfect for ambitious model builders.

Wishbones

V4 Truggy Suspension Arm Real

only available from customer service

500405817 - Carson V4 Truggy Suspension Arm Real is the original swing arm for V4 Truggy models and appeals to model building enthusiasts who want to precisely repair or upgrade the suspension and handling. As a precisely fitting spare part, it ensures simple installation and reliable function in remote-controlled vehicles.

Wishbones

V4 Truggy Suspension Arms front

only available from customer service

The Carson material number 500405832 designates the V4 Truggy Suspension Arms front, the front wishbones for the V4 Truggy. Model building enthusiasts will find a specific component here for repairing or supplementing the chassis; precise fit and clear alignment to the front axle make repair and maintenance easier.

Wishbones

V4 Truggy Upper suspension Arms front

only available from customer service

500405811 Carson V4 Truggy Upper suspension Arms front - original upper suspension arm set for the V4 Truggy from Carson, specifically for remote-controlled ground vehicles. The spare part enables uncomplicated replacement on the front axle, retains the standard suspension geometry and appeals to model builders who appreciate components that are true to the original.

RC chassis & attachments

Virus 4.0 6S Batteryholder

only available from customer service

Carson Virus 4.0 6S battery holder (500405768) is the right accessory for your Virus 4.0 setup and is aimed at demanding model building enthusiasts. This specially named component complements your vehicle's equipment and allows 6S batteries to be neatly organized during conversions. A must-have for fans of the Virus 4.0 model who want to replace or supplement specific components.

Additional spares

Virus 4.0 6S Chassis

only available from customer service

Carson Virus 4.2/Race/Rocket Chassis (500405765) is the original chassis for the Virus 4.2, Race and Rocket models from Carson. Model building enthusiasts will find a suitable brand part for assembly or as an exchange part that provides the authentic basis for construction, repair and personal vehicle customization.

Additional spares

Virus 4.0 6S Motorholder

only available from customer service

Virus 4.0 6S motor holder 500405763 from Carson is a specifically developed motor holder for the Virus 4.0 6S model. As a precisely fitting spare parts carrier, it enables the engine to be securely mounted, simplifies replacement and servicing and appeals to model building enthusiasts who value reliable function and a precise fit.

Pinions & gears

Virus 4.0 6S Piniongear

only available from customer service

Carson Virus 4.0 6S Piniongear 14T (500405764) is the pinion gear for the Virus 4.0 6S and is part of Carson's range of model accessories. The 14-tooth Piniongear is suitable as a spare part for repair or tuning and is aimed at model builders who are looking for compatible components for their vehicle.   Warning! Not suitable for children under 14 years.

Replacement & spares for combustion models

Virus 4.0 Alu Chassis Nitro

only available from customer service

RC chassis & attachments

Virus 4.0 Body + Wing

only available from customer service

Virus 4.0 Body + Wing (500801019) presents itself as a completely printed and glued buggy body made of robust polycarbonate and including a rear spoiler. Pre-drilled in black/red and specially designed for 1:8 combustion buggies, it combines a precise fit with high durability and easy installation.

RC chassis & attachments

Virus 4.0 Bodyholder Kit

only available from customer service

Virus 4.0 Bodyholder Kit 500405621 from Carson is aimed specifically at model building enthusiasts who want to optimally stabilize their Virus 4.0. The bodyholder kit secures the body accurately, replaces brackets and is the ideal replacement set for maintenance, fine-tuning and long-term use on the model.   Warning! Not suitable for children under 14 years.

Additional spares

Virus 4.0 brake disk

only available from customer service

Additional spares

Virus 4.0 brake lever set

only available from customer service

Additional spares

Virus 4.0 brake system

only available from customer service

Carson Virus 4.0 brake caliper (500205935) is the original spare part for your Virus 4.0 model and is aimed at demanding model builders. Precisely manufactured, it replaces worn brake parts and facilitates maintenance and repair, so that the control and original condition of the chassis are reliably maintained.

Additional spares

Virus 4.0 center diff. holder

only available from customer service

Replacement & spares for combustion models

Virus 4.0 engine mounts

only available from customer service

Additional spares

Virus 4.0 receiver box set

only available from customer service

Additional spares

Virus 4.0 servo holder

only available from customer service

Additional spares

Virus 4.0 splash guard

only available from customer service

Axles & drive shafts

Virus 4.0 steering linkage + servo horn

only available from customer service

Additional spares

Virus 4.0 steering plate

only available from customer service

Replacement & spares for combustion models

Virus 4.0 Throttle Linkage

only available from customer service

Carson Virus 4.0 Throttle Linkage (material number 500205953) is the right spare part for the Virus 4.0. Model builders receive a throttle linkage named by Carson, intended for replacement or repair on the Virus 4.0, and can thus find the required part for their vehicle. The article number 500205953 simplifies searching and ordering.

RC chassis & attachments

Virus 4.0 V32 Body and Wing

only available from customer service

500205976 Carson Virus 4.0 V32 body with rear wing offers model builders a striking look and clear lines for the Virus 4.0 V32. With a focus on design and appearance, this set complements your vehicle in style, facilitates customization and appeals to enthusiasts who value a coherent appearance.

RC chassis & attachments

Virus 4.0 Wings Stay Joint

only available from customer service

500205970 Virus 4.0 Wings Stay Joint from Carson is the wing stay component for the VIRUS 4.0 EP/GP models. Model building enthusiasts receive the specially designated part for use on the Virus 4.0, directly from the brand manufacturer Carson and suitable for the EP/GP models mentioned. Compatible with the VIRUS 4.0 EP and GP variants.

Additional spares

Virus 4.1 Center washers

only available from customer service

Additional spares

Virus 4.1 Motor bracket

only available from customer service

Pinions & gears

Virus 4.1 Motor pinion 19Z

only available from customer service

RC chassis & attachments

Virus 4.1 Race body mount

only available from customer service

Additional spares

Virus 4.1 Race motor mount

only available from customer service

Pinions & gears

Virus 4.1 Race motor pinion 18T

only available from customer service

Additional spares

Virus 4.1/Race Chassis (without cut-out)

only available from customer service

RC chassis & attachments

Virus 4.2/4.1 Race roll cage

only available from customer service

Pinions & gears

Virus 4.2/4.1/4.0 diff. driver (2) center

only available from customer service

Carrier for all Virus center differentials, 2 pieces

Pinions & gears

Virus 4.2/4.1/4.0 diff. driver (2) f/h

only available from customer service

Carrier for all Virus differentials front or rear, 2 pieces

RC chassis & attachments

Virus 4.2/4.1/Race rear spoiler black

only available from customer service

Additional spares

Virus Rocket 120 Alu Hex hub 17mm

only available from customer service

Additional spares

Virus Rocket 120 motor heat sink

only available from customer service

500405870 Virus Rocket 120 Aluminium heat sink - red anodized, especially for the Virus Rocket 120. The aluminium motor heat sink ensures targeted cooling of the motor and impresses with its precise manufacturing and high-quality surface. Ideal as a spare part or for visual enhancement, a robust original for demanding model builders.

Pinions & gears

Virus Rocket 120 motor piniongear

only available from customer service

500405871 Virus Rocket 120 motor pinion 19T is precisely manufactured with 19 teeth and specially designed for the Virus Rocket 120. Model building enthusiasts appreciate the precisely fitting teeth for constant power transmission and easy replacement. Ideal for repairing or fine-tuning the drivetrain. Suitable for the Virus Rocket 120 from Carson.

Additional spares

Water Propeller St.Tropez/Sunset

only available from customer service

The Carson propeller 500109015 for St. Tropez/Sunset is a metal propeller unit, precisely tailored to the St. Tropez and Sunset motor yachts. Modeling enthusiasts appreciate the robust construction and precise fit, which provide reliable propulsion and long-lasting performance on the water.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Wheel axle set (2) CV-10

only available from customer service

Carson Wheel axle set (2) CV-10 (500105129) provides model builders with two precisely fitting axles for replacing or upgrading their CV-10. The set is designed for uncomplicated assembly and restores smooth running and stability to the wheels. A reliable spare part for long-lasting driving pleasure. Perfect for ambitious model builders.   Warning! Not suitable for children under 14 years.

Axles & drive shafts

Wheel Axle Set CV-10 (2)

only available from customer service

Carson Wheel Axle Set CV-10 (2) - item number 500405133 - in black includes two wheel axles for the CV-10 system and is aimed at model building enthusiasts who are looking for precisely named spare parts. The compact set supports targeted replacement and maintenance and precisely complements the CV-10 equipment.   Warning! Not suitable for children under 14 years.